SRC Member Zac Posted October 26, 2008 SRC Member Share Posted October 26, 2008 Bro,For this no need to DIY. Just buy a mogul socket same as MH and fix it up . Then connect to your power supply and it just work. Regards Sherman bro sorry can i asked a stupid qns ? ;p wats a mogul socket? and wats are the list of stuff that i need to buy to make a led bulb? Quote Zac's Red Sea Reefer 170 Link to comment Share on other sites More sharing options...
SRC Member Oceandeep Posted October 26, 2008 SRC Member Share Posted October 26, 2008 Do they have spec like model, wattage, current, par range,etc?Anyway which shop you get from. Regards Well.. they do not have any spec. But I did ask them about the spec. is 120 - 180 deg view angle, 3W, current is 0.25A The shop is at 3rd floor, and the owner is from Hong kong. The basement shop(next to staircase) selling at S$85 for 12 piece. Quote Link to comment Share on other sites More sharing options...
SRC Member mousecat11 Posted October 26, 2008 SRC Member Share Posted October 26, 2008 Well.. they do not have any spec. But I did ask them about the spec.is 120 - 180 deg view angle, 3W, current is 0.25A The shop is at 3rd floor, and the owner is from Hong kong. The basement shop(next to staircase) selling at S$85 for 12 piece. How many bulb is there ? it seem like even to get a good sets of LEDs for D.I.Y is going to be costly as well... Quote My 2ft Tank Tank specification ; 1) 8 mm glass with external overflow tank 2) 8 mm sump tank 3) Main return pump - AB 3000 ( 45 W ) 4) Chiller main return pump - AB 2000i ( 18 W ) 5) Chiller - Artica titanium chiller 1/10 HP ( 75 W) 6) Wave maker - tunze 6206 nano wavebox ( 10 W only ! ) 7) Skimmer - H & S skimmer with AB needle wheel ( 18 W ) 8) CR - RM Calcium reactor with AB 1000 ( 10W ) 9) Denitirator - RM suplur Dnitirator with maxi jet pump ( 12 W ) 10 ) Lighting - Lumen Auqa LED lighting ( 48 W only ! ) 11) Hailei ozone generator ( 7 W ) 12) Oceanus 2 x 2ft LED lighting ( 14 W) for chaeto planting 13) Tunze 6025 ( 6 W) 14) Skimz FR with rowa TOTAL ; 263 W !!! Link to comment Share on other sites More sharing options...
sherman Posted October 26, 2008 Author Share Posted October 26, 2008 ok.Thank You bro. How many led you buy? You buy any driver or just connect direct to power supply Quote 6.5 * 2 * 2 + 3.75 * 1.5 *1.5,(Decomn on 14/9/08) 4*2*2 + 2.5*1.25*1.25 (Decomn on 1/8/09) 5*2*2 (Fully LED light system, 140 3 watt SSC leds with 60 degree lens)(Decomm) 2.5*2*2(Fully LED Light System,96 3 watt SSC leds with 60 degree lens)(Decomm) 5*2.5*2(LED only) Eheim return 1 * pump 1 HP Daikin compressor with cooling coil 2 Jebao OW40, 1 ecotech MP40, 1X6085 Tunze wm, 1 CURVE 7 Skimmer 1 DIY 80 led control by Bluefish mini 1 radion XR30W G2, 2 Radion XR15G3 Sump area lite by 5 ft T5 , 6 * SSC 3 watt red LED for refugium 1 Full spectrum E27 led light 1 CR control by bubble count Start No Water Change since 1st Dec 2016 Add new 2.5x2x 1.5 ft [/quote] Link to comment Share on other sites More sharing options...
SRC Member BarraCudaTM Posted October 26, 2008 SRC Member Share Posted October 26, 2008 Well.. they do not have any spec. But I did ask them about the spec.is 120 - 180 deg view angle, 3W, current is 0.25A The shop is at 3rd floor, and the owner is from Hong kong. The basement shop(next to staircase) selling at S$85 for 12 piece. hrmm .. 250mA sounds weird. I drive my Luxeon V at 700mA and K2 at 1000mA. Typical Luxeon III are driven at 700mA. You might have bought a luxeon I which is a 1watt LED. You will need a current regulated powersupply not voltage regulated like normal transformers Quote Link to comment Share on other sites More sharing options...
SRC Member ming69 Posted October 27, 2008 SRC Member Share Posted October 27, 2008 Well.. they do not have any spec. But I did ask them about the spec.is 120 - 180 deg view angle, 3W, current is 0.25A The shop is at 3rd floor, and the owner is from Hong kong. The basement shop(next to staircase) selling at S$85 for 12 piece. Bro, can show us what u bought? Quote Member of: Link to comment Share on other sites More sharing options...
Jameshong Posted October 27, 2008 Share Posted October 27, 2008 Well.. they do not have any spec. But I did ask them about the spec.is 120 - 180 deg view angle, 3W, current is 0.25A The shop is at 3rd floor, and the owner is from Hong kong. The basement shop(next to staircase) selling at S$85 for 12 piece. Angle wise is ok. Try to get 0.75 ~ 1A , 3 watt LED. Quote Knowing is not enough; we must apply. Willing is not enough; we must do. - Goethe Link to comment Share on other sites More sharing options...
SRC Member Oceandeep Posted October 27, 2008 SRC Member Share Posted October 27, 2008 after check with the web... is 1 watt.. Quote Link to comment Share on other sites More sharing options...
SRC Member Oceandeep Posted October 27, 2008 SRC Member Share Posted October 27, 2008 but after carefully observe, the die in the lens is similar to 3 watt.... for 1 watt is the right side.. which is star.. for 3 watt is left side .. which is a square.... Quote Link to comment Share on other sites More sharing options...
SRC Member Oceandeep Posted October 28, 2008 SRC Member Share Posted October 28, 2008 after read thru the datasheet.. http://www.philipslumileds.com/pdfs/AB11-A.PDF it mention, if no heatsink is attach together, the current will never over 0.3A, therefore is correct. And also base on the photo, the LED I got was Luxeon V. Quote Link to comment Share on other sites More sharing options...
SRC Member BarraCudaTM Posted October 28, 2008 SRC Member Share Posted October 28, 2008 after read thru the datasheet..http://www.philipslumileds.com/pdfs/AB11-A.PDF it mention, if no heatsink is attach together, the current will never over 0.3A, therefore is correct. And also base on the photo, the LED I got was Luxeon V. Luxeon V actually have 4 dies inside, please take a closer look. Luxeon V are also very expensive so not likely you will get 1 at that price. Quote Link to comment Share on other sites More sharing options...
SRC Member ming69 Posted October 28, 2008 SRC Member Share Posted October 28, 2008 Do u think a panel with 25 x 3w LEDs (combination of blues and white) will be able to replace a MH 150w light? W W B W W W B W B W B W B W W W B W B W W W B W W 16 whites & 9 blues or 17 whites & 8 blues W W B W W W B W B W B W W W B W B W B W W W B W W OR 19 whites & 6 blues B W W W B W W B W W W B B B W W W B W W B W W W B which combination would be better? Quote Member of: Link to comment Share on other sites More sharing options...
SRC Member zipp86 Posted October 29, 2008 SRC Member Share Posted October 29, 2008 you can get the LED lights at Katong Shopping Centre , there is a LED shop there that sells up to 3W LEDs. Quote Link to comment Share on other sites More sharing options...
sherman Posted November 2, 2008 Author Share Posted November 2, 2008 i FOUND ON THE WEB.It say for plant and aquarium. But do not know if good. So checking if anyone has see or use before. If good maybe will order This LED Panel has 108 LEDs Quote 6.5 * 2 * 2 + 3.75 * 1.5 *1.5,(Decomn on 14/9/08) 4*2*2 + 2.5*1.25*1.25 (Decomn on 1/8/09) 5*2*2 (Fully LED light system, 140 3 watt SSC leds with 60 degree lens)(Decomm) 2.5*2*2(Fully LED Light System,96 3 watt SSC leds with 60 degree lens)(Decomm) 5*2.5*2(LED only) Eheim return 1 * pump 1 HP Daikin compressor with cooling coil 2 Jebao OW40, 1 ecotech MP40, 1X6085 Tunze wm, 1 CURVE 7 Skimmer 1 DIY 80 led control by Bluefish mini 1 radion XR30W G2, 2 Radion XR15G3 Sump area lite by 5 ft T5 , 6 * SSC 3 watt red LED for refugium 1 Full spectrum E27 led light 1 CR control by bubble count Start No Water Change since 1st Dec 2016 Add new 2.5x2x 1.5 ft [/quote] Link to comment Share on other sites More sharing options...
sherman Posted November 2, 2008 Author Share Posted November 2, 2008 36 (blue) + 72 (White) = 108 pieces (White+Blue 12000 to 14000K) Look impressive but only 48 watts Quote 6.5 * 2 * 2 + 3.75 * 1.5 *1.5,(Decomn on 14/9/08) 4*2*2 + 2.5*1.25*1.25 (Decomn on 1/8/09) 5*2*2 (Fully LED light system, 140 3 watt SSC leds with 60 degree lens)(Decomm) 2.5*2*2(Fully LED Light System,96 3 watt SSC leds with 60 degree lens)(Decomm) 5*2.5*2(LED only) Eheim return 1 * pump 1 HP Daikin compressor with cooling coil 2 Jebao OW40, 1 ecotech MP40, 1X6085 Tunze wm, 1 CURVE 7 Skimmer 1 DIY 80 led control by Bluefish mini 1 radion XR30W G2, 2 Radion XR15G3 Sump area lite by 5 ft T5 , 6 * SSC 3 watt red LED for refugium 1 Full spectrum E27 led light 1 CR control by bubble count Start No Water Change since 1st Dec 2016 Add new 2.5x2x 1.5 ft [/quote] Link to comment Share on other sites More sharing options...
sherman Posted November 2, 2008 Author Share Posted November 2, 2008 How about this? Quote 6.5 * 2 * 2 + 3.75 * 1.5 *1.5,(Decomn on 14/9/08) 4*2*2 + 2.5*1.25*1.25 (Decomn on 1/8/09) 5*2*2 (Fully LED light system, 140 3 watt SSC leds with 60 degree lens)(Decomm) 2.5*2*2(Fully LED Light System,96 3 watt SSC leds with 60 degree lens)(Decomm) 5*2.5*2(LED only) Eheim return 1 * pump 1 HP Daikin compressor with cooling coil 2 Jebao OW40, 1 ecotech MP40, 1X6085 Tunze wm, 1 CURVE 7 Skimmer 1 DIY 80 led control by Bluefish mini 1 radion XR30W G2, 2 Radion XR15G3 Sump area lite by 5 ft T5 , 6 * SSC 3 watt red LED for refugium 1 Full spectrum E27 led light 1 CR control by bubble count Start No Water Change since 1st Dec 2016 Add new 2.5x2x 1.5 ft [/quote] Link to comment Share on other sites More sharing options...
sherman Posted November 2, 2008 Author Share Posted November 2, 2008 Product Information This MR16 utilizes 3X1.5W SSC LED that is capable of producing up to 300 Lumen (about a 20 watt halogen or 35 watt incandescent bulb). In addition, we use a constant current driver making this bulb more efficient and more reliable.The body is made on cast aluminum that releases the heat from the LED and the driver. Finally, the optical grade polycarbonate collimator allows light transmission at 45°beam angle. This bulb is available in 3000K (warm white) and 6000K (cool white). Be careful what you read about the 2x3 watt or 3x3 watt MR16. The body of the MR16 is just too small to release the heat generated by the LED. As a result, it shorten the life and reduce the light output of the LED. LED bulbs are compatible with all types of magnetic transformers but not all electronic transformers. Many electronic transformers require a minimum load which is greater than that provided by LED bulbs. LED bulbs will usually not work properly (no light output, flickering, and strobing) in fixtures that have integral electronic transformers in each fixture. We recommend changing the power LED power supply which can be purchase in our website. In addition, many standard Track Light power supplies will produce voltages as high as 16 with little or no load (LED bulbs provide little load). You must make sure that the voltage of your existing power supply does not exceed 14 Volts with the LED bulbs installed. Specifications Bulb Type MR16 3x 1.5 Watt SSC LED GX 5.3 Base Life time 50,000 Hours Color White (6000K) View Angle 45 Deg Light output 240-300 Lumen (about 20 watt of a halogen) Operating Voltage 12 V AC / DC Consumption 4.5 Watt Product Diameter 1.96" or 50 mm Product Length 1.9" or 48 ml Quote 6.5 * 2 * 2 + 3.75 * 1.5 *1.5,(Decomn on 14/9/08) 4*2*2 + 2.5*1.25*1.25 (Decomn on 1/8/09) 5*2*2 (Fully LED light system, 140 3 watt SSC leds with 60 degree lens)(Decomm) 2.5*2*2(Fully LED Light System,96 3 watt SSC leds with 60 degree lens)(Decomm) 5*2.5*2(LED only) Eheim return 1 * pump 1 HP Daikin compressor with cooling coil 2 Jebao OW40, 1 ecotech MP40, 1X6085 Tunze wm, 1 CURVE 7 Skimmer 1 DIY 80 led control by Bluefish mini 1 radion XR30W G2, 2 Radion XR15G3 Sump area lite by 5 ft T5 , 6 * SSC 3 watt red LED for refugium 1 Full spectrum E27 led light 1 CR control by bubble count Start No Water Change since 1st Dec 2016 Add new 2.5x2x 1.5 ft [/quote] Link to comment Share on other sites More sharing options...
sherman Posted November 9, 2008 Author Share Posted November 9, 2008 Got some LED from Seoul semicon through a friend 1 w and 4 w LED Do some DIY and test out. See pictures below Quote 6.5 * 2 * 2 + 3.75 * 1.5 *1.5,(Decomn on 14/9/08) 4*2*2 + 2.5*1.25*1.25 (Decomn on 1/8/09) 5*2*2 (Fully LED light system, 140 3 watt SSC leds with 60 degree lens)(Decomm) 2.5*2*2(Fully LED Light System,96 3 watt SSC leds with 60 degree lens)(Decomm) 5*2.5*2(LED only) Eheim return 1 * pump 1 HP Daikin compressor with cooling coil 2 Jebao OW40, 1 ecotech MP40, 1X6085 Tunze wm, 1 CURVE 7 Skimmer 1 DIY 80 led control by Bluefish mini 1 radion XR30W G2, 2 Radion XR15G3 Sump area lite by 5 ft T5 , 6 * SSC 3 watt red LED for refugium 1 Full spectrum E27 led light 1 CR control by bubble count Start No Water Change since 1st Dec 2016 Add new 2.5x2x 1.5 ft [/quote] Link to comment Share on other sites More sharing options...
sherman Posted November 9, 2008 Author Share Posted November 9, 2008 The 4 w led on the left and the diy with self turn heat sink. This is direct ac LED Quote 6.5 * 2 * 2 + 3.75 * 1.5 *1.5,(Decomn on 14/9/08) 4*2*2 + 2.5*1.25*1.25 (Decomn on 1/8/09) 5*2*2 (Fully LED light system, 140 3 watt SSC leds with 60 degree lens)(Decomm) 2.5*2*2(Fully LED Light System,96 3 watt SSC leds with 60 degree lens)(Decomm) 5*2.5*2(LED only) Eheim return 1 * pump 1 HP Daikin compressor with cooling coil 2 Jebao OW40, 1 ecotech MP40, 1X6085 Tunze wm, 1 CURVE 7 Skimmer 1 DIY 80 led control by Bluefish mini 1 radion XR30W G2, 2 Radion XR15G3 Sump area lite by 5 ft T5 , 6 * SSC 3 watt red LED for refugium 1 Full spectrum E27 led light 1 CR control by bubble count Start No Water Change since 1st Dec 2016 Add new 2.5x2x 1.5 ft [/quote] Link to comment Share on other sites More sharing options...
SRC Member markietan Posted November 9, 2008 SRC Member Share Posted November 9, 2008 Got some LED from Seoul semicon through a friend1 w and 4 w LED Do some DIY and test out. See pictures below can't see your picture.. think u nv attach properly. how about this one? chanced upon it on another site http://store.lsgc.com/SoL-R38-P50.aspx Quote :DECOMMED 5ft shallow tank: :DECOMMED 3ft tank::DECOMMED 2ft nano tank: :4ft Balcony Tank: Link to comment Share on other sites More sharing options...
sherman Posted November 9, 2008 Author Share Posted November 9, 2008 Testing after assembly Quote 6.5 * 2 * 2 + 3.75 * 1.5 *1.5,(Decomn on 14/9/08) 4*2*2 + 2.5*1.25*1.25 (Decomn on 1/8/09) 5*2*2 (Fully LED light system, 140 3 watt SSC leds with 60 degree lens)(Decomm) 2.5*2*2(Fully LED Light System,96 3 watt SSC leds with 60 degree lens)(Decomm) 5*2.5*2(LED only) Eheim return 1 * pump 1 HP Daikin compressor with cooling coil 2 Jebao OW40, 1 ecotech MP40, 1X6085 Tunze wm, 1 CURVE 7 Skimmer 1 DIY 80 led control by Bluefish mini 1 radion XR30W G2, 2 Radion XR15G3 Sump area lite by 5 ft T5 , 6 * SSC 3 watt red LED for refugium 1 Full spectrum E27 led light 1 CR control by bubble count Start No Water Change since 1st Dec 2016 Add new 2.5x2x 1.5 ft [/quote] Link to comment Share on other sites More sharing options...
SRC Member markietan Posted November 9, 2008 SRC Member Share Posted November 9, 2008 can't see your picture.. think u nv attach properly. how about this one? chanced upon it on another site http://store.lsgc.com/SoL-R38-P50.aspx this one also quite cool http://www.journeelighting.com/products/luminaires Quote :DECOMMED 5ft shallow tank: :DECOMMED 3ft tank::DECOMMED 2ft nano tank: :4ft Balcony Tank: Link to comment Share on other sites More sharing options...
sherman Posted November 9, 2008 Author Share Posted November 9, 2008 can't see your picture.. think u nv attach properly. how about this one? chanced upon it on another site http://store.lsgc.com/SoL-R38-P50.aspx Sori I mean picture in the post after this post Quote 6.5 * 2 * 2 + 3.75 * 1.5 *1.5,(Decomn on 14/9/08) 4*2*2 + 2.5*1.25*1.25 (Decomn on 1/8/09) 5*2*2 (Fully LED light system, 140 3 watt SSC leds with 60 degree lens)(Decomm) 2.5*2*2(Fully LED Light System,96 3 watt SSC leds with 60 degree lens)(Decomm) 5*2.5*2(LED only) Eheim return 1 * pump 1 HP Daikin compressor with cooling coil 2 Jebao OW40, 1 ecotech MP40, 1X6085 Tunze wm, 1 CURVE 7 Skimmer 1 DIY 80 led control by Bluefish mini 1 radion XR30W G2, 2 Radion XR15G3 Sump area lite by 5 ft T5 , 6 * SSC 3 watt red LED for refugium 1 Full spectrum E27 led light 1 CR control by bubble count Start No Water Change since 1st Dec 2016 Add new 2.5x2x 1.5 ft [/quote] Link to comment Share on other sites More sharing options...
sherman Posted November 9, 2008 Author Share Posted November 9, 2008 Testing in my study room Quote 6.5 * 2 * 2 + 3.75 * 1.5 *1.5,(Decomn on 14/9/08) 4*2*2 + 2.5*1.25*1.25 (Decomn on 1/8/09) 5*2*2 (Fully LED light system, 140 3 watt SSC leds with 60 degree lens)(Decomm) 2.5*2*2(Fully LED Light System,96 3 watt SSC leds with 60 degree lens)(Decomm) 5*2.5*2(LED only) Eheim return 1 * pump 1 HP Daikin compressor with cooling coil 2 Jebao OW40, 1 ecotech MP40, 1X6085 Tunze wm, 1 CURVE 7 Skimmer 1 DIY 80 led control by Bluefish mini 1 radion XR30W G2, 2 Radion XR15G3 Sump area lite by 5 ft T5 , 6 * SSC 3 watt red LED for refugium 1 Full spectrum E27 led light 1 CR control by bubble count Start No Water Change since 1st Dec 2016 Add new 2.5x2x 1.5 ft [/quote] Link to comment Share on other sites More sharing options...
sherman Posted November 9, 2008 Author Share Posted November 9, 2008 Testing next to my T5. Left side 4 w led right side 2*24 w T5HO Quote 6.5 * 2 * 2 + 3.75 * 1.5 *1.5,(Decomn on 14/9/08) 4*2*2 + 2.5*1.25*1.25 (Decomn on 1/8/09) 5*2*2 (Fully LED light system, 140 3 watt SSC leds with 60 degree lens)(Decomm) 2.5*2*2(Fully LED Light System,96 3 watt SSC leds with 60 degree lens)(Decomm) 5*2.5*2(LED only) Eheim return 1 * pump 1 HP Daikin compressor with cooling coil 2 Jebao OW40, 1 ecotech MP40, 1X6085 Tunze wm, 1 CURVE 7 Skimmer 1 DIY 80 led control by Bluefish mini 1 radion XR30W G2, 2 Radion XR15G3 Sump area lite by 5 ft T5 , 6 * SSC 3 watt red LED for refugium 1 Full spectrum E27 led light 1 CR control by bubble count Start No Water Change since 1st Dec 2016 Add new 2.5x2x 1.5 ft [/quote] Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.