Jump to content

WTS DELTEC CALCIUM REACTOR PF 501


Recommended Posts

  • SRC Member

Deltec CR PF501 with Catalina 3.5cylinder,AquaLifter dosing pump for feeding it,Dennerle Regulator and Electronic Solonoid Selling it at $800! Include Media! Plug and Play! Price NEG! Will throw in 1

more Small Dennerle CO2 Cylinder for the buyer!

Deltec Fluidized Bed Calcium Reactors

Deltec Calcium Reactors like many of Deltec's products are different from the normal items available on the marketplace.

With conventional non fluidised calcium reactors, as the media dissolves and breaks down, the fine particles are left to choke up the reactor and the water finds its own easiest route through. This results in tracking or channeling, where the contact area with the water ends up being very small leading to a rapid drop off in efficiency.

With the Deltec fluidised reactors the media is kept constantly moving so that it is impossible for tracking to occur and the whole of the media is utilised. Additionally the smaller grain size gives a much greater surface area for reaction with the water and any fine particles are either dissolved or flushed out of the reactor.

Most non fluidised calcium reactors can not achieve more than 35-45 dKh. Through fluidisation Deltec Reactors can achieve a dKh in excess of 80 which corresponds to a significantly higher calcium level.

Unlike conventional reactors which require regular cleaning out, the Deltec models if used correctly should only require topping up with media.

We recommend that the calcium level within the aquarium should be kept between 420-450mg/ltr.

With the Deltec Fluidized Calcium Reactor it is possible to adjust and control the calcium content in a simple manner.

PF 501

The PF 501 is one of the latest generation of Deltec Fluidised Calcium Reactors and takes over from the PF500.

The Reactors are now fitted with sponges top and bottom of the reaction chamber to prevent the posibility of the fluidised media from entering the pump. The whole lid assembly now removes via a bayonet fitting to allow easy access to the media for filling or cleaning of the reactor.

New Fluidized Calcium Reactors - 4rd Generation with integral CO2 bubble counter, non return valve, probe holder an non return valve. optional solinoid valve with 2mtrs of cable are available

For Aquariums up to: Heavy Stocking and High Illumination 900 Ltrs (200gals)

Normal Stocking and Normal Illumination1100 Ltrs (245 gals)

Footprint Dimensions: L: 210mm W: 150mm H: 500mm

Pls pm or call 96314688!!!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share



×
×
  • Create New...