Jump to content

Vlamingi_cont's 2nd tank


Recommended Posts

  • SRC Member

Wait for 2-3weeks then transfer your fishes.

girlone.png
Link to comment
Share on other sites

  • Replies 1.3k
  • Created
  • Last Reply

Top Posters In This Topic

  • SRC Member
You cannot transfer the fishes to the tank while it's still cycling...ANN cycle not completed yet. The ammonia and nitrite will stress and kill your fishes. Better to check all the readings first.

Yeah i forgot to menton aboit the ANN cycle.Patience my friend.If you play MMORPG you also need patience.Don't know wether you played these games or not.

Just like they said Patience Is The Key To Success

girlone.png
Link to comment
Share on other sites

  • SRC Member
Yeah i forgot to menton aboit the ANN cycle.Patience my friend.If you play MMORPG you also need patience.Don't know wether you played these games or not.

Just like they said Patience Is The Key To Success

Actually erm... Everytime i on comp only this few sites www.sgreefclub.com or www.aquamarin.com.sg or www.nano-reef.com... LOL i've a very different habit from other children leh... Dunno why nv play games one :huh: ... :lol:

1ft cube with IOS [the low tech tank]

1. JBJ C-breeze to keep temp hovering around 27-28'C

2. LED clip on - 120 bulbs

-skimmer-less-

My 3 humble equipments that keeps my tank running... [DRIED OUT]

1. The RSM itself of course 2.My NEW Deltec MCE-300 Skimmer 3. My trusty Arctica Chiller

Tank parameters:

Temperature maintained at 25.3'C to 24.7'C

No3: 10ppm(b4 the use of the deltec skimmer)

No3: 5ppm (after use of the skimmer)

Others? too lazy to measure...LOL

Camera- EOS 50D

Link to comment
Share on other sites

  • SRC Member
You cannot transfer the fishes to the tank while it's still cycling...ANN cycle not completed yet. The ammonia and nitrite will stress and kill your fishes. Better to check all the readings first.

Latest readings

Amm : 0.25ppm(every time the same)

Nitrate : 10 ppm(Fluctuating between 20ppm to 10ppm)

Nitrite : Yet to be tested

pH : 8.0 (wth)

1ft cube with IOS [the low tech tank]

1. JBJ C-breeze to keep temp hovering around 27-28'C

2. LED clip on - 120 bulbs

-skimmer-less-

My 3 humble equipments that keeps my tank running... [DRIED OUT]

1. The RSM itself of course 2.My NEW Deltec MCE-300 Skimmer 3. My trusty Arctica Chiller

Tank parameters:

Temperature maintained at 25.3'C to 24.7'C

No3: 10ppm(b4 the use of the deltec skimmer)

No3: 5ppm (after use of the skimmer)

Others? too lazy to measure...LOL

Camera- EOS 50D

Link to comment
Share on other sites

  • SRC Member
What do you mean...? While your tank is still going through re-cycling stage? I have just the picture for you:

Dunno how long thiz cycle is gonna take... But is there a difference the rocks are used in my previous set ups...

1ft cube with IOS [the low tech tank]

1. JBJ C-breeze to keep temp hovering around 27-28'C

2. LED clip on - 120 bulbs

-skimmer-less-

My 3 humble equipments that keeps my tank running... [DRIED OUT]

1. The RSM itself of course 2.My NEW Deltec MCE-300 Skimmer 3. My trusty Arctica Chiller

Tank parameters:

Temperature maintained at 25.3'C to 24.7'C

No3: 10ppm(b4 the use of the deltec skimmer)

No3: 5ppm (after use of the skimmer)

Others? too lazy to measure...LOL

Camera- EOS 50D

Link to comment
Share on other sites

  • SRC Member

Meanwhile the aquascapes :) ... Tried the editing in Paint...

post-14611-1224126465.jpg

1ft cube with IOS [the low tech tank]

1. JBJ C-breeze to keep temp hovering around 27-28'C

2. LED clip on - 120 bulbs

-skimmer-less-

My 3 humble equipments that keeps my tank running... [DRIED OUT]

1. The RSM itself of course 2.My NEW Deltec MCE-300 Skimmer 3. My trusty Arctica Chiller

Tank parameters:

Temperature maintained at 25.3'C to 24.7'C

No3: 10ppm(b4 the use of the deltec skimmer)

No3: 5ppm (after use of the skimmer)

Others? too lazy to measure...LOL

Camera- EOS 50D

Link to comment
Share on other sites

  • SRC Member

Love the arch... :wub:

post-14611-1224126722.jpg

1ft cube with IOS [the low tech tank]

1. JBJ C-breeze to keep temp hovering around 27-28'C

2. LED clip on - 120 bulbs

-skimmer-less-

My 3 humble equipments that keeps my tank running... [DRIED OUT]

1. The RSM itself of course 2.My NEW Deltec MCE-300 Skimmer 3. My trusty Arctica Chiller

Tank parameters:

Temperature maintained at 25.3'C to 24.7'C

No3: 10ppm(b4 the use of the deltec skimmer)

No3: 5ppm (after use of the skimmer)

Others? too lazy to measure...LOL

Camera- EOS 50D

Link to comment
Share on other sites

  • SRC Member

Side view... :rolleyes:

post-14611-1224126826.jpg

1ft cube with IOS [the low tech tank]

1. JBJ C-breeze to keep temp hovering around 27-28'C

2. LED clip on - 120 bulbs

-skimmer-less-

My 3 humble equipments that keeps my tank running... [DRIED OUT]

1. The RSM itself of course 2.My NEW Deltec MCE-300 Skimmer 3. My trusty Arctica Chiller

Tank parameters:

Temperature maintained at 25.3'C to 24.7'C

No3: 10ppm(b4 the use of the deltec skimmer)

No3: 5ppm (after use of the skimmer)

Others? too lazy to measure...LOL

Camera- EOS 50D

Link to comment
Share on other sites

  • SRC Member

Compared to

post-14611-1224126906.jpg

1ft cube with IOS [the low tech tank]

1. JBJ C-breeze to keep temp hovering around 27-28'C

2. LED clip on - 120 bulbs

-skimmer-less-

My 3 humble equipments that keeps my tank running... [DRIED OUT]

1. The RSM itself of course 2.My NEW Deltec MCE-300 Skimmer 3. My trusty Arctica Chiller

Tank parameters:

Temperature maintained at 25.3'C to 24.7'C

No3: 10ppm(b4 the use of the deltec skimmer)

No3: 5ppm (after use of the skimmer)

Others? too lazy to measure...LOL

Camera- EOS 50D

Link to comment
Share on other sites

  • SRC Member
Actually erm... Everytime i on comp only this few sites www.sgreefclub.com or www.aquamarin.com.sg or www.nano-reef.com... LOL i've a very different habit from other children leh... Dunno why nv play games one :huh: ... :lol:

Lol a non gamer.I got addicted to it sometimes especially when the MMORPG is damn good.Anyway you need something in order to learn patience.Anyway good luck for your tank.Hope that we could meet each other someday to go LFS shopping.

girlone.png
Link to comment
Share on other sites

  • SRC Member

Just remember that reef keeping ISN'T a game! Once you've decided to get that said livestock, you should be responsible to make sure that its "home" (your tank) is suitable for it to live in, even BEFORE you buy it. Reef on, responsibly.

I do not know what caused the tank crash, but these rocks take in all the crap. It is only reasonable to let it complete the ANN cycle again for stability. I'm sure you do not want to risk another tank crash, no?

Why don't you remove all that stuff on the background since you're at the restarting stage? I don't know about you, but I like my tank to be as clean as possible. It doesn't look anything like coraline algae, so I don't see a purpose in keeping them. Just my opinion.

Link to comment
Share on other sites

  • SRC Member
Just remember that reef keeping ISN'T a game! Once you've decided to get that said livestock, you should be responsible to make sure that its "home" (your tank) is suitable for it to live in, even BEFORE you buy it. Reef on, responsibly.

I do not know what caused the tank crash, but these rocks take in all the crap. It is only reasonable to let it complete the ANN cycle again for stability. I'm sure you do not want to risk another tank crash, no?

Why don't you remove all that stuff on the background since you're at the restarting stage? I don't know about you, but I like my tank to be as clean as possible. It doesn't look anything like coraline algae, so I don't see a purpose in keeping them. Just my opinion.

Yar idun wish for another tank crash as its a waste of money... <_<. Re the background thingy how to remove it??

1ft cube with IOS [the low tech tank]

1. JBJ C-breeze to keep temp hovering around 27-28'C

2. LED clip on - 120 bulbs

-skimmer-less-

My 3 humble equipments that keeps my tank running... [DRIED OUT]

1. The RSM itself of course 2.My NEW Deltec MCE-300 Skimmer 3. My trusty Arctica Chiller

Tank parameters:

Temperature maintained at 25.3'C to 24.7'C

No3: 10ppm(b4 the use of the deltec skimmer)

No3: 5ppm (after use of the skimmer)

Others? too lazy to measure...LOL

Camera- EOS 50D

Link to comment
Share on other sites

  • SRC Member
Lol a non gamer.I got addicted to it sometimes especially when the MMORPG is damn good.Anyway you need something in order to learn patience.Anyway good luck for your tank.Hope that we could meet each other someday to go LFS shopping.

Yea man! :)

1ft cube with IOS [the low tech tank]

1. JBJ C-breeze to keep temp hovering around 27-28'C

2. LED clip on - 120 bulbs

-skimmer-less-

My 3 humble equipments that keeps my tank running... [DRIED OUT]

1. The RSM itself of course 2.My NEW Deltec MCE-300 Skimmer 3. My trusty Arctica Chiller

Tank parameters:

Temperature maintained at 25.3'C to 24.7'C

No3: 10ppm(b4 the use of the deltec skimmer)

No3: 5ppm (after use of the skimmer)

Others? too lazy to measure...LOL

Camera- EOS 50D

Link to comment
Share on other sites

  • SRC Member

Any help on removing the background's algae? :thanks:

1ft cube with IOS [the low tech tank]

1. JBJ C-breeze to keep temp hovering around 27-28'C

2. LED clip on - 120 bulbs

-skimmer-less-

My 3 humble equipments that keeps my tank running... [DRIED OUT]

1. The RSM itself of course 2.My NEW Deltec MCE-300 Skimmer 3. My trusty Arctica Chiller

Tank parameters:

Temperature maintained at 25.3'C to 24.7'C

No3: 10ppm(b4 the use of the deltec skimmer)

No3: 5ppm (after use of the skimmer)

Others? too lazy to measure...LOL

Camera- EOS 50D

Link to comment
Share on other sites

Latest readings

Amm : 0.25ppm(every time the same)

Nitrate : 10 ppm(Fluctuating between 20ppm to 10ppm)

Nitrite : Yet to be tested

pH : 8.0 (wth)

1. you must wait for Amm to reach zero

2. Once Amm reach zero, you must wait for Nitrite to reach Zero(please note Amm just reach zero means nitrite will be high, meaning no fish can survive in there too)

3. Once Nitrite reach zero..... perform 50% water change.

4. Than try to add fish(note not fishes) slowly, if not the whole ANN cycle will go busted again.

Please be more patient young man :look:

aquatronica7na.gif
Link to comment
Share on other sites

  • SRC Member
1. you must wait for Amm to reach zero

2. Once Amm reach zero, you must wait for Nitrite to reach Zero(please note Amm just reach zero means nitrite will be high, meaning no fish can survive in there too)

3. Once Nitrite reach zero..... perform 50% water change.

4. Than try to add fish(note not fishes) slowly, if not the whole ANN cycle will go busted again.

Please be more patient young man :look:

So test 1 fish first? When nitrite reached 0 and amm reached 0 but now water still look abit murky leh... :erm:

1ft cube with IOS [the low tech tank]

1. JBJ C-breeze to keep temp hovering around 27-28'C

2. LED clip on - 120 bulbs

-skimmer-less-

My 3 humble equipments that keeps my tank running... [DRIED OUT]

1. The RSM itself of course 2.My NEW Deltec MCE-300 Skimmer 3. My trusty Arctica Chiller

Tank parameters:

Temperature maintained at 25.3'C to 24.7'C

No3: 10ppm(b4 the use of the deltec skimmer)

No3: 5ppm (after use of the skimmer)

Others? too lazy to measure...LOL

Camera- EOS 50D

Link to comment
Share on other sites

  • SRC Member

To maintain the water parameters e.g (salinity, pH, etc) I bought... Part A&B, Trace Elements and Calcium... :P

post-14611-1224468180.jpg

1ft cube with IOS [the low tech tank]

1. JBJ C-breeze to keep temp hovering around 27-28'C

2. LED clip on - 120 bulbs

-skimmer-less-

My 3 humble equipments that keeps my tank running... [DRIED OUT]

1. The RSM itself of course 2.My NEW Deltec MCE-300 Skimmer 3. My trusty Arctica Chiller

Tank parameters:

Temperature maintained at 25.3'C to 24.7'C

No3: 10ppm(b4 the use of the deltec skimmer)

No3: 5ppm (after use of the skimmer)

Others? too lazy to measure...LOL

Camera- EOS 50D

Link to comment
Share on other sites

  • SRC Member

Your good shop there got sell Marine Environment salt and Coral marine salt.But i suggest Marine environment salt cause i tried coral marine and it's not worthh it cause the calcium level is damn low.Get the big packet Marine Environment slat so that you can make water change easily without thinking of the salt running out.

girlone.png
Link to comment
Share on other sites

  • SRC Member

Yeah.Corals are vanishing at a rapid pace.So do consider and read up before buying any corals or fish.Tell you what.Get those damsels or clownfish first.Pajama cardinals are good too.

Then stock up on begginer corals and don't dose the part A stuffs first cause with sufficient water change using good salt mix e.g. Marine Environment it will maintain you calcium or other elements.Never ever rush to get the corals lets say a nice acro on sale is nice.Don't buy on impulse.Read up first before trying.

Hope you will follow the advices me and other bros typed.

girlone.png
Link to comment
Share on other sites

  • SRC Member

Anyway i thought Part A and contains calcium already?Cause that day went down to AM and i saw that skeleton builder is calcium too and i thought it was Strontium or something.

girlone.png
Link to comment
Share on other sites

  • SRC Member
Anyway i thought Part A and contains calcium already?Cause that day went down to AM and i saw that skeleton builder is calcium too and i thought it was Strontium or something.

Erm... Ado said that if i wanna keep sps best is to use both A and the calc... :peace:

1ft cube with IOS [the low tech tank]

1. JBJ C-breeze to keep temp hovering around 27-28'C

2. LED clip on - 120 bulbs

-skimmer-less-

My 3 humble equipments that keeps my tank running... [DRIED OUT]

1. The RSM itself of course 2.My NEW Deltec MCE-300 Skimmer 3. My trusty Arctica Chiller

Tank parameters:

Temperature maintained at 25.3'C to 24.7'C

No3: 10ppm(b4 the use of the deltec skimmer)

No3: 5ppm (after use of the skimmer)

Others? too lazy to measure...LOL

Camera- EOS 50D

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share




×
×
  • Create New...