Jump to content

WTS Equips


Solo77
 Share

Recommended Posts

Have the following for sales:

- Baoyu Wave Maker - WM-1 - Suitable for 40 to 300L Tank(Less than 3 months) - $20

- Red Sed Prizm hang-on Skimmer - $70

- 3 X overhead mechanical filter, adjustable from 2 to 3ft?. One is new. - $10 each.

- 2 ft by 1ft by 1.5 ft tank - with either iron stand or matching wooden cabinet - $40(transport not provided)

- 2 X heaters - 50 W and 100 W, $3 & $5 respectively.

- 1 taiwan made canister filter - Bought at $88. Less than 3 mths old. - $40.

- 1 Hailea Chiller for 1.5 ft tank - $50.

Collection at Sengkang. Interested, please PM me. Thanks.

Tank : 4 X 2 X 2 with low iron front panel and external overflow

Skimmer : BK SM200 with waste collector

Return Pumps : Red Dragon 6m3 and Ehiem 1262

FR : 2 X Deltec 509 & powered by AB2000

Nitrate Filter : Deltec NF 509 and tee off from AB2000

Calcium R'tor : Deltec PF 501 with RM secondary chamber

Kalkwasser R'tor : Deltec KM500

Chiller : Pansonic 1 HP Compressor with 20m titanium Coil

Wave Makers : 4 X Tunze 6055 with 7096 & Vortec MP40w

Controller : GHL Profilux

Lighting : ATI Powermodule 10 or 8 tubes

Water Top-up : Water Top-Up tank powered by Tunze Osmolator

External Monitor : American Pinpoint pH and Temp. Monitor for main tank and GHL Profilux Controller to measure temp, pH, Redox

Ozonizer : Sander C50

UV : Corallife 6x

Algae Scrubbler

Link to comment
Share on other sites

Have the following for sales:

- Baoyu Wave Maker - WM-1 - Suitable for 40 to 300L Tank(Less than 3 months) - $20

- Red Sed Prizm hang-on Skimmer - $70

- 3 X overhead mechanical filter, adjustable from 2 to 3ft?. One is new. - $10 each.

- 2 ft by 1ft by 1.5 ft tank - with either iron stand or matching wooden cabinet - $40(transport not provided)

- 2 X heaters - 50 W and 100 W, $3 & $5 respectively.

- 1 taiwan made canister filter - Bought at $88. Less than 3 mths old. - $40.

- 1 Hailea Chiller for 1.5 ft tank - $50.

Collection at Sengkang. Interested, please PM me. Thanks.

HI,

what is the model of your hailea chiller> I'm interested. 98276527

Link to comment
Share on other sites

Dear All,

Had received quite a number of enquiy on the chiller. Will check and post tomorrow. From what i know, it is meant for small tank, flow rate is 350 to 600 L/H. Thanks.

HI,

what is the model of your hailea chiller> I'm interested. 98276527

Tank : 4 X 2 X 2 with low iron front panel and external overflow

Skimmer : BK SM200 with waste collector

Return Pumps : Red Dragon 6m3 and Ehiem 1262

FR : 2 X Deltec 509 & powered by AB2000

Nitrate Filter : Deltec NF 509 and tee off from AB2000

Calcium R'tor : Deltec PF 501 with RM secondary chamber

Kalkwasser R'tor : Deltec KM500

Chiller : Pansonic 1 HP Compressor with 20m titanium Coil

Wave Makers : 4 X Tunze 6055 with 7096 & Vortec MP40w

Controller : GHL Profilux

Lighting : ATI Powermodule 10 or 8 tubes

Water Top-up : Water Top-Up tank powered by Tunze Osmolator

External Monitor : American Pinpoint pH and Temp. Monitor for main tank and GHL Profilux Controller to measure temp, pH, Redox

Ozonizer : Sander C50

UV : Corallife 6x

Algae Scrubbler

Link to comment
Share on other sites

The chiller is It is hailea hl 080 chv. 150W. 300 to 650 L/H. Interested, please PM. Thanks.

Dear All,

Had received quite a number of enquiy on the chiller. Will check and post tomorrow. From what i know, it is meant for small tank, flow rate is 350 to 600 L/H. Thanks.

Tank : 4 X 2 X 2 with low iron front panel and external overflow

Skimmer : BK SM200 with waste collector

Return Pumps : Red Dragon 6m3 and Ehiem 1262

FR : 2 X Deltec 509 & powered by AB2000

Nitrate Filter : Deltec NF 509 and tee off from AB2000

Calcium R'tor : Deltec PF 501 with RM secondary chamber

Kalkwasser R'tor : Deltec KM500

Chiller : Pansonic 1 HP Compressor with 20m titanium Coil

Wave Makers : 4 X Tunze 6055 with 7096 & Vortec MP40w

Controller : GHL Profilux

Lighting : ATI Powermodule 10 or 8 tubes

Water Top-up : Water Top-Up tank powered by Tunze Osmolator

External Monitor : American Pinpoint pH and Temp. Monitor for main tank and GHL Profilux Controller to measure temp, pH, Redox

Ozonizer : Sander C50

UV : Corallife 6x

Algae Scrubbler

Link to comment
Share on other sites

Dear all, received lots of sms and pm on the chiller and skimmer. It will be based on first come first serve basis. For the chiller, the info printed is what i know. It is definitely meant for small setup, 2ft cube or 2 ft by 1 ft by 1.5ft is also considered too big for this chiller. Thanks.

The chiller is It is hailea hl 080 chv. 150W. 300 to 650 L/H. Interested, please PM. Thanks.

Tank : 4 X 2 X 2 with low iron front panel and external overflow

Skimmer : BK SM200 with waste collector

Return Pumps : Red Dragon 6m3 and Ehiem 1262

FR : 2 X Deltec 509 & powered by AB2000

Nitrate Filter : Deltec NF 509 and tee off from AB2000

Calcium R'tor : Deltec PF 501 with RM secondary chamber

Kalkwasser R'tor : Deltec KM500

Chiller : Pansonic 1 HP Compressor with 20m titanium Coil

Wave Makers : 4 X Tunze 6055 with 7096 & Vortec MP40w

Controller : GHL Profilux

Lighting : ATI Powermodule 10 or 8 tubes

Water Top-up : Water Top-Up tank powered by Tunze Osmolator

External Monitor : American Pinpoint pH and Temp. Monitor for main tank and GHL Profilux Controller to measure temp, pH, Redox

Ozonizer : Sander C50

UV : Corallife 6x

Algae Scrubbler

Link to comment
Share on other sites

Updates. Thanks.

Baoyu Wave Maker - WM-1 - Suitable for 40 to 300L Tank(Less than 3 months) - $20

- Red Sed Prizm hang-on Skimmer - Sold

- 3 X overhead mechanical filter, adjustable from 2 to 3ft?. One is new. - $10 each.

- 2 ft by 1ft by 1.5 ft tank - with either iron stand or matching wooden cabinet - $40(transport not provided)

- 2 X heaters - 50 W and 100 W, $3 & $5 respectively.

- 1 taiwan made canister filter - Bought at $88. Less than 3 mths old. - $40.

- 1 Hailea Chiller for 1.5 ft tank - $50.

Dear all, received lots of sms and pm on the chiller and skimmer. It will be based on first come first serve basis. For the chiller, the info printed is what i know. It is definitely meant for small setup, 2ft cube or 2 ft by 1 ft by 1.5ft is also considered too big for this chiller. Thanks.

Tank : 4 X 2 X 2 with low iron front panel and external overflow

Skimmer : BK SM200 with waste collector

Return Pumps : Red Dragon 6m3 and Ehiem 1262

FR : 2 X Deltec 509 & powered by AB2000

Nitrate Filter : Deltec NF 509 and tee off from AB2000

Calcium R'tor : Deltec PF 501 with RM secondary chamber

Kalkwasser R'tor : Deltec KM500

Chiller : Pansonic 1 HP Compressor with 20m titanium Coil

Wave Makers : 4 X Tunze 6055 with 7096 & Vortec MP40w

Controller : GHL Profilux

Lighting : ATI Powermodule 10 or 8 tubes

Water Top-up : Water Top-Up tank powered by Tunze Osmolator

External Monitor : American Pinpoint pH and Temp. Monitor for main tank and GHL Profilux Controller to measure temp, pH, Redox

Ozonizer : Sander C50

UV : Corallife 6x

Algae Scrubbler

Link to comment
Share on other sites

  • 3 weeks later...
  • SRC Member

any pic on your 2 footer tank? 6mm normal tank w/o sump? do let me know. cos may set up a small tank in office. thanks! :D

Link to comment
Share on other sites

Will try to take photo. It is a normal tank with no hole for sump. Used to rear gold fish but later for my marine. The setup then was a prizism skimmer, chillr, canister filter and light. Mostly sold except for tank and canister filter. Upgraded, so selling away.

any pic on your 2 footer tank? 6mm normal tank w/o sump? do let me know. cos may set up a small tank in office. thanks! :D

Tank : 4 X 2 X 2 with low iron front panel and external overflow

Skimmer : BK SM200 with waste collector

Return Pumps : Red Dragon 6m3 and Ehiem 1262

FR : 2 X Deltec 509 & powered by AB2000

Nitrate Filter : Deltec NF 509 and tee off from AB2000

Calcium R'tor : Deltec PF 501 with RM secondary chamber

Kalkwasser R'tor : Deltec KM500

Chiller : Pansonic 1 HP Compressor with 20m titanium Coil

Wave Makers : 4 X Tunze 6055 with 7096 & Vortec MP40w

Controller : GHL Profilux

Lighting : ATI Powermodule 10 or 8 tubes

Water Top-up : Water Top-Up tank powered by Tunze Osmolator

External Monitor : American Pinpoint pH and Temp. Monitor for main tank and GHL Profilux Controller to measure temp, pH, Redox

Ozonizer : Sander C50

UV : Corallife 6x

Algae Scrubbler

Link to comment
Share on other sites

Dear all,

sorry for not updating and wasted everyone's precious time.

Baoyu Wave Maker - WM-1 - Suitable for 40 to 300L Tank(Less than 3 months) - $20 - tentatively reserved by XXXXX464

- 3 X overhead mechanical filter, adjustable from 2 to 3ft?. One is new. - $10 each.

- 2 ft by 1ft by 1.5 ft tank - with either iron stand or matching wooden cabinet - $40(transport not provided)

- 2 X heaters - 50 W and 100 W, $3 & $5 respectively.

- 1 taiwan made canister filter - Bought at $88. Less than 3 mths old. - $40.

Tank : 4 X 2 X 2 with low iron front panel and external overflow

Skimmer : BK SM200 with waste collector

Return Pumps : Red Dragon 6m3 and Ehiem 1262

FR : 2 X Deltec 509 & powered by AB2000

Nitrate Filter : Deltec NF 509 and tee off from AB2000

Calcium R'tor : Deltec PF 501 with RM secondary chamber

Kalkwasser R'tor : Deltec KM500

Chiller : Pansonic 1 HP Compressor with 20m titanium Coil

Wave Makers : 4 X Tunze 6055 with 7096 & Vortec MP40w

Controller : GHL Profilux

Lighting : ATI Powermodule 10 or 8 tubes

Water Top-up : Water Top-Up tank powered by Tunze Osmolator

External Monitor : American Pinpoint pH and Temp. Monitor for main tank and GHL Profilux Controller to measure temp, pH, Redox

Ozonizer : Sander C50

UV : Corallife 6x

Algae Scrubbler

Link to comment
Share on other sites

Hi to bro Vertigo, just do a search fo boyu WM1. The photo will be there.

Hi Bro,

Interested in the chiller and Boyu WM1... Any pic?

Tank : 4 X 2 X 2 with low iron front panel and external overflow

Skimmer : BK SM200 with waste collector

Return Pumps : Red Dragon 6m3 and Ehiem 1262

FR : 2 X Deltec 509 & powered by AB2000

Nitrate Filter : Deltec NF 509 and tee off from AB2000

Calcium R'tor : Deltec PF 501 with RM secondary chamber

Kalkwasser R'tor : Deltec KM500

Chiller : Pansonic 1 HP Compressor with 20m titanium Coil

Wave Makers : 4 X Tunze 6055 with 7096 & Vortec MP40w

Controller : GHL Profilux

Lighting : ATI Powermodule 10 or 8 tubes

Water Top-up : Water Top-Up tank powered by Tunze Osmolator

External Monitor : American Pinpoint pH and Temp. Monitor for main tank and GHL Profilux Controller to measure temp, pH, Redox

Ozonizer : Sander C50

UV : Corallife 6x

Algae Scrubbler

Link to comment
Share on other sites

It is around 600L/H. That is what i know. Hope this help.

Whats ur specs of your canister??

Tank : 4 X 2 X 2 with low iron front panel and external overflow

Skimmer : BK SM200 with waste collector

Return Pumps : Red Dragon 6m3 and Ehiem 1262

FR : 2 X Deltec 509 & powered by AB2000

Nitrate Filter : Deltec NF 509 and tee off from AB2000

Calcium R'tor : Deltec PF 501 with RM secondary chamber

Kalkwasser R'tor : Deltec KM500

Chiller : Pansonic 1 HP Compressor with 20m titanium Coil

Wave Makers : 4 X Tunze 6055 with 7096 & Vortec MP40w

Controller : GHL Profilux

Lighting : ATI Powermodule 10 or 8 tubes

Water Top-up : Water Top-Up tank powered by Tunze Osmolator

External Monitor : American Pinpoint pH and Temp. Monitor for main tank and GHL Profilux Controller to measure temp, pH, Redox

Ozonizer : Sander C50

UV : Corallife 6x

Algae Scrubbler

Link to comment
Share on other sites

It is around 600L/H. That is what i know. Hope this help.

Hi bro,

Is the WM1 too strong for a 1 ft cube tank? Anyone out there used b4, pls advise thanks. And does it generate alot of heat cos the spec say power consumption 28W. Cos i'm using a PC fan to cool my tank.

Hope you don't mind me asking so many questions. Just to ensure this is what im looking for.

Cos i'm actually looking for Hydor nano wave maker.

Link to comment
Share on other sites

For 1 ft cube, i think this is too strong. Someone selling Krolia 1 for $30 - think is moorish. Just try. All the best. : )

Hi bro,

Is the WM1 too strong for a 1 ft cube tank? Anyone out there used b4, pls advise thanks. And does it generate alot of heat cos the spec say power consumption 28W. Cos i'm using a PC fan to cool my tank.

Hope you don't mind me asking so many questions. Just to ensure this is what im looking for.

Cos i'm actually looking for Hydor nano wave maker.

Tank : 4 X 2 X 2 with low iron front panel and external overflow

Skimmer : BK SM200 with waste collector

Return Pumps : Red Dragon 6m3 and Ehiem 1262

FR : 2 X Deltec 509 & powered by AB2000

Nitrate Filter : Deltec NF 509 and tee off from AB2000

Calcium R'tor : Deltec PF 501 with RM secondary chamber

Kalkwasser R'tor : Deltec KM500

Chiller : Pansonic 1 HP Compressor with 20m titanium Coil

Wave Makers : 4 X Tunze 6055 with 7096 & Vortec MP40w

Controller : GHL Profilux

Lighting : ATI Powermodule 10 or 8 tubes

Water Top-up : Water Top-Up tank powered by Tunze Osmolator

External Monitor : American Pinpoint pH and Temp. Monitor for main tank and GHL Profilux Controller to measure temp, pH, Redox

Ozonizer : Sander C50

UV : Corallife 6x

Algae Scrubbler

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share



  • Join us on the largest Reefing community in Asia!

    Sign up and share your reefing journey with us, make friends and get helps from the community .

     

  • Topics

  • Latest Update

    1. 0

      加拿大保录取_SFU毕业证成绩单——Q微信751558146西蒙菲莎大学学位证_成绩单_办理SFU文凭学历认证Simon Fraser University

    2. 0

      美国学位证_Brandeis毕业证成绩单+Q微信751558146布兰迪斯大学学位证_成绩单_办理Brandeis文凭学历认证Brandeis University

    3. 0

      加拿大保录取_UBC毕业证成绩单——Q微信751558146英属哥伦比亚大学学位证_成绩单_办理UBC文凭学历认证University of British Columbia

    4. 0

      美国学位证_PSU毕业证成绩单+Q微信751558146宾州州立大学学位证_成绩单_办理PSU文凭学历认证Penn State University Park

×
×
  • Create New...