Jump to content

LED wanted.

Jameshong

By Jameshong,
in DIY Forum

 Share

Recommended Posts

sherman Enthusiast

sherman

Posted
Posted

So k2 with driver at Aust $20 is it cheap?

6.5 * 2 * 2 + 3.75 * 1.5 *1.5,(Decomn on 14/9/08)
4*2*2 + 2.5*1.25*1.25 (Decomn on 1/8/09)
5*2*2 (Fully LED light system, 140 3 watt SSC leds with 60 degree lens)(Decomm)
2.5*2*2(Fully LED Light System,96 3 watt SSC leds with 60 degree lens)(Decomm)

5*2.5*2(LED only)

Eheim return 1 * pump

1 HP Daikin compressor with cooling coil
2 Jebao OW40, 1 ecotech MP40,
1X6085 Tunze wm,

1 CURVE 7 Skimmer

  1 DIY 80 led control by Bluefish mini 

1 radion XR30W G2, 2 Radion XR15G3

Sump area lite by 5 ft T5 , 6 * SSC 3 watt red LED for refugium

1 Full spectrum E27 led light

1 CR control by bubble count

Start No Water Change since 1st Dec 2016

Add new 2.5x2x 1.5 ft 

 nLekOfpYts.jpg
[/quote]


 

Link to comment
Share on other sites
sherman Enthusiast

sherman

Posted
Posted

Live rates at 2008.05.04 04:52:22 UTC

20.00 AUD = 25.5415 SGD

Australia Dollars Singapore Dollars

1 AUD = 1.27707 SGD 1 SGD = 0.783041 AUD

20 Aust is about 25.56 Sing.

I do not know what is the shipping charge

6.5 * 2 * 2 + 3.75 * 1.5 *1.5,(Decomn on 14/9/08)
4*2*2 + 2.5*1.25*1.25 (Decomn on 1/8/09)
5*2*2 (Fully LED light system, 140 3 watt SSC leds with 60 degree lens)(Decomm)
2.5*2*2(Fully LED Light System,96 3 watt SSC leds with 60 degree lens)(Decomm)

5*2.5*2(LED only)

Eheim return 1 * pump

1 HP Daikin compressor with cooling coil
2 Jebao OW40, 1 ecotech MP40,
1X6085 Tunze wm,

1 CURVE 7 Skimmer

  1 DIY 80 led control by Bluefish mini 

1 radion XR30W G2, 2 Radion XR15G3

Sump area lite by 5 ft T5 , 6 * SSC 3 watt red LED for refugium

1 Full spectrum E27 led light

1 CR control by bubble count

Start No Water Change since 1st Dec 2016

Add new 2.5x2x 1.5 ft 

 nLekOfpYts.jpg
[/quote]


 

Link to comment
Share on other sites
sherman Enthusiast

sherman

Posted
Posted

AUD$ 9.00 S&H will be added to Australian orders AUD$ 15.00 S&H will be added to international orders

So need to add Aust $15 for shipping and handing

6.5 * 2 * 2 + 3.75 * 1.5 *1.5,(Decomn on 14/9/08)
4*2*2 + 2.5*1.25*1.25 (Decomn on 1/8/09)
5*2*2 (Fully LED light system, 140 3 watt SSC leds with 60 degree lens)(Decomm)
2.5*2*2(Fully LED Light System,96 3 watt SSC leds with 60 degree lens)(Decomm)

5*2.5*2(LED only)

Eheim return 1 * pump

1 HP Daikin compressor with cooling coil
2 Jebao OW40, 1 ecotech MP40,
1X6085 Tunze wm,

1 CURVE 7 Skimmer

  1 DIY 80 led control by Bluefish mini 

1 radion XR30W G2, 2 Radion XR15G3

Sump area lite by 5 ft T5 , 6 * SSC 3 watt red LED for refugium

1 Full spectrum E27 led light

1 CR control by bubble count

Start No Water Change since 1st Dec 2016

Add new 2.5x2x 1.5 ft 

 nLekOfpYts.jpg
[/quote]


 

Link to comment
Share on other sites
  • SRC Member
nakazoru Newbie

nakazoru

Posted
  • SRC Member
Posted

Believe it is marketed by Future Electronics. When I bought mine, the K2 star not even out. Guess LED is really fast moving tech.

How much you paid for these guys?

Equipment:

30G Corner Tank with 10G Sump, 2 x 24W artinic T5, 1 x 24W 10K, 1x 24W 20K, 3" Grade 0 sand & Live rocks, Activated Carbon, Bio-home, 2 x Seio M620, Hailea 1/2HP Chiller, Redsea Pro Skimmer

Live Stock:

Turbo Snail x 1, Green Mandarin Dragonet X 2, Blue Tang X 2, True percular x 2, 1 x Algae Bleenie, Clarke clown x 2

Reef:

1 x 2" Blue maxima, Red/Brown/Purple Mushroom (Discosoma), Pink Ricordea yuma, A little colony Brown/Green common Zoanthus, Red/Pink/Green US Zoanthus, Eagle-eye Zoathus, 14 Branch Goniopora Pandoraensis, 1 Starburst Polyps, 3 + 2 Branch Frogspawn, 4 Blasto, palythoa, Cheato

RIPs (Since June 2005):

1. Sabae clown (KO by Clarke clown) 2. 1 branch melted frogspawn 4 branch 3. Golden maxima (Ripe the base off rock by me) 4. Algae Bleenie x 2 (Starvation) 5. Blue Maxima x 1, 2 x Maxima, 1 x frogspawn, rics (Overtemp...)

Old 30G Corner Tank.

Restarted 30G Corner Tank.

Link to comment
Share on other sites
  • SRC Member
BarraCudaTM Newbie

BarraCudaTM

Posted
  • SRC Member
Posted
Believe it is marketed by Future Electronics. When I bought mine, the K2 star not even out. Guess LED is really fast moving tech.

How much you paid for these guys?

Its about SGD$10 each if you ship enough of it. K2 star is mounted by luxdrive, so are the Rebels so most likely have to get them shipped from US.

My next upgrade will be the Rebels once luxdrive start to mount Royalblues on the endor stars. :eyebrow:

Link to comment
Share on other sites
  • SRC Member
nakazoru Newbie

nakazoru

Posted
  • SRC Member
Posted
Just received some K2, I believe philips lumileds do have a plant in yishun, just that there is noone selling them locally to end users.

05052008154.jpg

Its about SGD$10 each if you ship enough of it. K2 star is mounted by luxdrive, so are the Rebels so most likely have to get them shipped from US.

My next upgrade will be the Rebels once luxdrive start to mount Royalblues on the endor stars. :eyebrow:

Wah; cut throat price again. Add in the lens that comes abt 13-14SGD. Still must counter in the Heatsink and drivers. Are you buying the standard bucks drivers or using just normal regulated NPN transistor to drives these guys?

Equipment:

30G Corner Tank with 10G Sump, 2 x 24W artinic T5, 1 x 24W 10K, 1x 24W 20K, 3" Grade 0 sand & Live rocks, Activated Carbon, Bio-home, 2 x Seio M620, Hailea 1/2HP Chiller, Redsea Pro Skimmer

Live Stock:

Turbo Snail x 1, Green Mandarin Dragonet X 2, Blue Tang X 2, True percular x 2, 1 x Algae Bleenie, Clarke clown x 2

Reef:

1 x 2" Blue maxima, Red/Brown/Purple Mushroom (Discosoma), Pink Ricordea yuma, A little colony Brown/Green common Zoanthus, Red/Pink/Green US Zoanthus, Eagle-eye Zoathus, 14 Branch Goniopora Pandoraensis, 1 Starburst Polyps, 3 + 2 Branch Frogspawn, 4 Blasto, palythoa, Cheato

RIPs (Since June 2005):

1. Sabae clown (KO by Clarke clown) 2. 1 branch melted frogspawn 4 branch 3. Golden maxima (Ripe the base off rock by me) 4. Algae Bleenie x 2 (Starvation) 5. Blue Maxima x 1, 2 x Maxima, 1 x frogspawn, rics (Overtemp...)

Old 30G Corner Tank.

Restarted 30G Corner Tank.

Link to comment
Share on other sites
  • SRC Member
BarraCudaTM Newbie

BarraCudaTM

Posted
  • SRC Member
Posted
Wah; cut throat price again. Add in the lens that comes abt 13-14SGD. Still must counter in the Heatsink and drivers. Are you buying the standard bucks drivers or using just normal regulated NPN transistor to drives these guys?

I'm using the luxdrive buckpuck drivers, small footprint and can drive 5pcs of K2 with standard 24V supply. Going to drive them at 1000mA now and 1500mA later once the drivers are available. I did not use any lenses as I need the royalblues to blend better with the CREE XR-E if not will see distinct blue/white shadow.

Here's my modified CREE XR-E array, taken from a LED light bulb.

18042008121.jpg

Link to comment
Share on other sites
  • SRC Member
nakazoru Newbie

nakazoru

Posted
  • SRC Member
Posted
I'm using the luxdrive buckpuck drivers, small footprint and can drive 5pcs of K2 with standard 24V supply. Going to drive them at 1000mA now and 1500mA later once the drivers are available. I did not use any lenses as I need the royalblues to blend better with the CREE XR-E if not will see distinct blue/white shadow.

Here's my modified CREE XR-E array, taken from a LED light bulb.

18042008121.jpg

I understood that the buckpuck driver doesn't come cheap, but of a cheapest range available. Good choice none the less.

However, I'm surprise that you not using lens for the blue, as blue LED provide the main spectrum for the corals' health. But then I do not know the depth of your tank you are illuminating, so may I ask how deep is your tank?

For me I more corcern with the heat dissipation on the heatsink for now. Hope it will work out.

Equipment:

30G Corner Tank with 10G Sump, 2 x 24W artinic T5, 1 x 24W 10K, 1x 24W 20K, 3" Grade 0 sand & Live rocks, Activated Carbon, Bio-home, 2 x Seio M620, Hailea 1/2HP Chiller, Redsea Pro Skimmer

Live Stock:

Turbo Snail x 1, Green Mandarin Dragonet X 2, Blue Tang X 2, True percular x 2, 1 x Algae Bleenie, Clarke clown x 2

Reef:

1 x 2" Blue maxima, Red/Brown/Purple Mushroom (Discosoma), Pink Ricordea yuma, A little colony Brown/Green common Zoanthus, Red/Pink/Green US Zoanthus, Eagle-eye Zoathus, 14 Branch Goniopora Pandoraensis, 1 Starburst Polyps, 3 + 2 Branch Frogspawn, 4 Blasto, palythoa, Cheato

RIPs (Since June 2005):

1. Sabae clown (KO by Clarke clown) 2. 1 branch melted frogspawn 4 branch 3. Golden maxima (Ripe the base off rock by me) 4. Algae Bleenie x 2 (Starvation) 5. Blue Maxima x 1, 2 x Maxima, 1 x frogspawn, rics (Overtemp...)

Old 30G Corner Tank.

Restarted 30G Corner Tank.

Link to comment
Share on other sites
  • SRC Member
BarraCudaTM Newbie

BarraCudaTM

Posted
  • SRC Member
Posted
I understood that the buckpuck driver doesn't come cheap, but of a cheapest range available. Good choice none the less.

However, I'm surprise that you not using lens for the blue, as blue LED provide the main spectrum for the corals' health. But then I do not know the depth of your tank you are illuminating, so may I ask how deep is your tank?

For me I more corcern with the heat dissipation on the heatsink for now. Hope it will work out.

The LEDs are about 3' from the bottom of the tank. I'm planing to use a total 80watts of 450nm ,18watts of 410nm, 42watts 5000K.

Currently I have 40watts 450nm and 15watts 5000K keeping some purple acros, clam and bubbles, too soon to say whether its successful or not, I'm still monitoring.

All the LEDs will be mounted on a 4'x1' 3mm aluminium heat sink plate. I have taken temperature measurements of the heat sink directly opposite the LEDs, its around 45C, give it about +10-20C increase at the LED junction, its still within the temperature design limit.

Link to comment
Share on other sites
  • SRC Member
nakazoru Newbie

nakazoru

Posted
  • SRC Member
Posted
The LEDs are about 3' from the bottom of the tank. I'm planing to use a total 80watts of 450nm ,18watts of 410nm, 42watts 5000K.

Currently I have 40watts 450nm and 15watts 5000K keeping some purple acros, clam and bubbles, too soon to say whether its successful or not, I'm still monitoring.

All the LEDs will be mounted on a 4'x1' 3mm aluminium heat sink plate. I have taken temperature measurements of the heat sink directly opposite the LEDs, its around 45C, give it about +10-20C increase at the LED junction, its still within the temperature design limit.

Bro Barra;

I afraid that the LED w/o lens may not be penetrative for a 3ft depth. I use a 45deg lens to converge the LED with efficiency of 89% efficiency as per specs. Without lens, I remembered it to be >120deg or more, cannot remember. But then it hard to say, until corals are complaining, it still just might work since SPS are near the top. Update me on the health of the corals.

The Alum heatsink plate you using, are they finned? The temperature you obtain of 45deg is very good, but it is the air temp near heatsink or the surface temp of Alum? Did you use fan to force convention the heatsink?

Sorry to ask so much, as I will be putting my prototype to real life this weekend... Lots of drilling and soldering..

Equipment:

30G Corner Tank with 10G Sump, 2 x 24W artinic T5, 1 x 24W 10K, 1x 24W 20K, 3" Grade 0 sand & Live rocks, Activated Carbon, Bio-home, 2 x Seio M620, Hailea 1/2HP Chiller, Redsea Pro Skimmer

Live Stock:

Turbo Snail x 1, Green Mandarin Dragonet X 2, Blue Tang X 2, True percular x 2, 1 x Algae Bleenie, Clarke clown x 2

Reef:

1 x 2" Blue maxima, Red/Brown/Purple Mushroom (Discosoma), Pink Ricordea yuma, A little colony Brown/Green common Zoanthus, Red/Pink/Green US Zoanthus, Eagle-eye Zoathus, 14 Branch Goniopora Pandoraensis, 1 Starburst Polyps, 3 + 2 Branch Frogspawn, 4 Blasto, palythoa, Cheato

RIPs (Since June 2005):

1. Sabae clown (KO by Clarke clown) 2. 1 branch melted frogspawn 4 branch 3. Golden maxima (Ripe the base off rock by me) 4. Algae Bleenie x 2 (Starvation) 5. Blue Maxima x 1, 2 x Maxima, 1 x frogspawn, rics (Overtemp...)

Old 30G Corner Tank.

Restarted 30G Corner Tank.

Link to comment
Share on other sites
  • SRC Member
BarraCudaTM Newbie

BarraCudaTM

Posted
  • SRC Member
Posted
Bro Barra;

I afraid that the LED w/o lens may not be penetrative for a 3ft depth. I use a 45deg lens to converge the LED with efficiency of 89% efficiency as per specs. Without lens, I remembered it to be >120deg or more, cannot remember. But then it hard to say, until corals are complaining, it still just might work since SPS are near the top. Update me on the health of the corals.

The Alum heatsink plate you using, are they finned? The temperature you obtain of 45deg is very good, but it is the air temp near heatsink or the surface temp of Alum? Did you use fan to force convention the heatsink?

Sorry to ask so much, as I will be putting my prototype to real life this weekend... Lots of drilling and soldering..

I place the SPS about 1' way from the LEDs, so far so good.

The aluminum is just a normal plate bent at the edges to form a C-channel to give it more strength. The temperature measured is the surface temperature of the aluminum, no fans were used.

thermocouple.jpg

Link to comment
Share on other sites
  • SRC Member
nakazoru Newbie

nakazoru

Posted
  • SRC Member
Posted
I place the SPS about 1' way from the LEDs, so far so good.

The aluminum is just a normal plate bent at the edges to form a C-channel to give it more strength. The temperature measured is the surface temperature of the aluminum, no fans were used.

thermocouple.jpg

Hmmm;

Your multimeter can measure temp... Wonder why mine cannot. Hope to see your tank shot if possible.

Cheers

Equipment:

30G Corner Tank with 10G Sump, 2 x 24W artinic T5, 1 x 24W 10K, 1x 24W 20K, 3" Grade 0 sand & Live rocks, Activated Carbon, Bio-home, 2 x Seio M620, Hailea 1/2HP Chiller, Redsea Pro Skimmer

Live Stock:

Turbo Snail x 1, Green Mandarin Dragonet X 2, Blue Tang X 2, True percular x 2, 1 x Algae Bleenie, Clarke clown x 2

Reef:

1 x 2" Blue maxima, Red/Brown/Purple Mushroom (Discosoma), Pink Ricordea yuma, A little colony Brown/Green common Zoanthus, Red/Pink/Green US Zoanthus, Eagle-eye Zoathus, 14 Branch Goniopora Pandoraensis, 1 Starburst Polyps, 3 + 2 Branch Frogspawn, 4 Blasto, palythoa, Cheato

RIPs (Since June 2005):

1. Sabae clown (KO by Clarke clown) 2. 1 branch melted frogspawn 4 branch 3. Golden maxima (Ripe the base off rock by me) 4. Algae Bleenie x 2 (Starvation) 5. Blue Maxima x 1, 2 x Maxima, 1 x frogspawn, rics (Overtemp...)

Old 30G Corner Tank.

Restarted 30G Corner Tank.

Link to comment
Share on other sites
sherman Enthusiast

sherman

Posted
Posted

Bro Barra,

So you get your led from US?

How much you paid for the led and S&H?

Bro nakazoru,

You bought in Singapore?

What is the contact email and how much per led?

Regards

Thank You

Sherman

6.5 * 2 * 2 + 3.75 * 1.5 *1.5,(Decomn on 14/9/08)
4*2*2 + 2.5*1.25*1.25 (Decomn on 1/8/09)
5*2*2 (Fully LED light system, 140 3 watt SSC leds with 60 degree lens)(Decomm)
2.5*2*2(Fully LED Light System,96 3 watt SSC leds with 60 degree lens)(Decomm)

5*2.5*2(LED only)

Eheim return 1 * pump

1 HP Daikin compressor with cooling coil
2 Jebao OW40, 1 ecotech MP40,
1X6085 Tunze wm,

1 CURVE 7 Skimmer

  1 DIY 80 led control by Bluefish mini 

1 radion XR30W G2, 2 Radion XR15G3

Sump area lite by 5 ft T5 , 6 * SSC 3 watt red LED for refugium

1 Full spectrum E27 led light

1 CR control by bubble count

Start No Water Change since 1st Dec 2016

Add new 2.5x2x 1.5 ft 

 nLekOfpYts.jpg
[/quote]


 

Link to comment
Share on other sites
  • SRC Member
nakazoru Newbie

nakazoru

Posted
  • SRC Member
Posted
Bro Barra,

So you get your led from US?

How much you paid for the led and S&H?

Bro nakazoru,

You bought in Singapore?

What is the contact email and how much per led?

Regards

Thank You

Sherman

PM You

Equipment:

30G Corner Tank with 10G Sump, 2 x 24W artinic T5, 1 x 24W 10K, 1x 24W 20K, 3" Grade 0 sand & Live rocks, Activated Carbon, Bio-home, 2 x Seio M620, Hailea 1/2HP Chiller, Redsea Pro Skimmer

Live Stock:

Turbo Snail x 1, Green Mandarin Dragonet X 2, Blue Tang X 2, True percular x 2, 1 x Algae Bleenie, Clarke clown x 2

Reef:

1 x 2" Blue maxima, Red/Brown/Purple Mushroom (Discosoma), Pink Ricordea yuma, A little colony Brown/Green common Zoanthus, Red/Pink/Green US Zoanthus, Eagle-eye Zoathus, 14 Branch Goniopora Pandoraensis, 1 Starburst Polyps, 3 + 2 Branch Frogspawn, 4 Blasto, palythoa, Cheato

RIPs (Since June 2005):

1. Sabae clown (KO by Clarke clown) 2. 1 branch melted frogspawn 4 branch 3. Golden maxima (Ripe the base off rock by me) 4. Algae Bleenie x 2 (Starvation) 5. Blue Maxima x 1, 2 x Maxima, 1 x frogspawn, rics (Overtemp...)

Old 30G Corner Tank.

Restarted 30G Corner Tank.

Link to comment
Share on other sites
  • SRC Member
nakazoru Newbie

nakazoru

Posted
  • SRC Member
Posted
Maybe we can get a bulk order from future electronics singapore? Its better than ordering from US direct.

Sherman, mine is around SGD$10+ per LED including shipping.

Dun tink it will get a extremely high volume for the price to drop significantly since LED not common and ex now. Also not many ppl will know how to DIY.

Equipment:

30G Corner Tank with 10G Sump, 2 x 24W artinic T5, 1 x 24W 10K, 1x 24W 20K, 3" Grade 0 sand & Live rocks, Activated Carbon, Bio-home, 2 x Seio M620, Hailea 1/2HP Chiller, Redsea Pro Skimmer

Live Stock:

Turbo Snail x 1, Green Mandarin Dragonet X 2, Blue Tang X 2, True percular x 2, 1 x Algae Bleenie, Clarke clown x 2

Reef:

1 x 2" Blue maxima, Red/Brown/Purple Mushroom (Discosoma), Pink Ricordea yuma, A little colony Brown/Green common Zoanthus, Red/Pink/Green US Zoanthus, Eagle-eye Zoathus, 14 Branch Goniopora Pandoraensis, 1 Starburst Polyps, 3 + 2 Branch Frogspawn, 4 Blasto, palythoa, Cheato

RIPs (Since June 2005):

1. Sabae clown (KO by Clarke clown) 2. 1 branch melted frogspawn 4 branch 3. Golden maxima (Ripe the base off rock by me) 4. Algae Bleenie x 2 (Starvation) 5. Blue Maxima x 1, 2 x Maxima, 1 x frogspawn, rics (Overtemp...)

Old 30G Corner Tank.

Restarted 30G Corner Tank.

Link to comment
Share on other sites
  • SRC Member
BarraCudaTM Newbie

BarraCudaTM

Posted
  • SRC Member
Posted
diy is not the hard part i tink. the problems i m facing now is the narrow beam angle the leds are producing. i am also concerned about the spectrum it is emitting throughout its usage life.

The high powered LEDs do not have really narrow beam angle, they typically have an angle of 100-140degrees. Users normally use optics to focus them.

You can mix and match different LEDs to deliver exactly the spectrum you wanted, this is something that you cannot do easily with other lighting.

Most reputable LEDs have a typical 70% lumens maintenance at 50000hrs.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Join us on the largest Reefing community in Asia!

    Sign up and share your reefing journey with us, make friends and get helps from the community .

     

  • Topics

  • Latest Update

    1. 6

      Decommissioning Sales of 5f Reef Tank

      Pmed u Sent from my SM-S906E using Tapatalk
      chriskessha in Sell off/Pasar Malam Shop
    2. 0

      Carleton Diploma毕业证,卡尔顿大学毕业证——Q微信751558146￥加拿大,毕业证,学位证,文凭,学历认证,留学认证,教育部认证,Carleton University

      Carleton Diploma毕业证,卡尔顿大学毕业证——Q微信751558146￥加拿大,毕业证,学位证,文凭,学历认证,留学认证,教育部认证,Carleton UniversityCarleton Diploma毕业证,卡尔顿大学毕业证——Q微信751558146￥加拿大,毕业证,学位证,文凭,学历认证,留学认证,教育部认证,Carleton UniversityCarleton Diploma毕业证,卡尔顿大学毕业证——Q微信751558146￥加拿大,毕业证,学位证,文凭,学历认证,留学认证,教育部认证 【实体公司】QQ/微信751558146办理毕业证，成绩单，教育部学历学位认证，使馆认证，归国人员证明，修改成绩单+信封申请学校，offer录取通知书，在读证明，普利茅斯大学学位证书，Plymouth毕业文凭。 ★★主营项目： ◆办理真实使馆公证(即留学回国人员证明,免费申请货后付款,不成功不收费!!!) ◆办理教育部国外学历学位认证。(网上可查、永久存档、快速稳妥,回国发展,考公务员,落户,进国企,外企,创业,无忧愁) ◆办理各国各大学文凭(世界名校一对一专业服务,可全程监控跟踪进度) ◆提供整套申请学校材料 ◆可以提供钢印、水印、烫金、激光防伪、凹凸版、最新版的普利茅斯大学毕业证、百分之百让您绝对满意、设计,印刷,DHL快递;毕业证、成绩单7个工作日,真实大使馆教育部认证2个月。 【真实可查】---【永久存档】---【安全可靠】---【值得信赖】 八年从业经验,专业指导,私人定制,倾心为您解决留学毕业回国各种疑难问题 <1>教育部学历学位认证服务: 做到真实永久存档，网上轻易可查，绝对对客户的资料进行保密，登录核实后再付款。 <2>为什么您的学位需要在国内进一步认证？ 二：留信认证的作用 1：该专业认证可证明留学生真实留学身份。 2：同时对留学生所学专业等级给予评定。 3：国家专业人才认证中心颁发入库证书 4：这个入网证书并且可以归档到地方 5：凡是获得留信网入网的信息将会逐步更新到个人身份内，将在公安部网内查询个人身份证信息后，同步读取人 才网入库信息。 6：个人职称评审加20分。 7：个人信誉贷款加10分。 8：在国家人才网主办的全国网络招聘大会中纳入资料，供国家500强等高端企业选择人才。
      wfe45345 in Members Tank & Specs
    3. 0

      办理!!美国MU毕业证*成绩单＠Q微信751558146马凯特大学(本科/硕士)毕业证成绩单*MU学位证书文凭各大学保录取Marquette University

      办理!!美国MU毕业证*成绩单＠Q微信751558146马凯特大学(本科/硕士)毕业证成绩单*MU学位证书文凭各大学保录取Marquette University办理!!美国MU毕业证*成绩单＠Q微信751558146马凯特大学(本科/硕士)毕业证成绩单*MU学位证书文凭各大学保录取Marquette University办理!!美国MU毕业证*成绩单＠Q微信751558146马凯特大学(本科/硕士)毕业证成绩单*MU学位证书文凭各大学保录取Marquette University 【实体公司】QQ/微信751558146办理毕业证，成绩单，教育部学历学位认证，使馆认证，归国人员证明，修改成绩单+信封申请学校，offer录取通知书，在读证明，普利茅斯大学学位证书，Plymouth毕业文凭。 ★★主营项目： ◆办理真实使馆公证(即留学回国人员证明,免费申请货后付款,不成功不收费!!!) ◆办理教育部国外学历学位认证。(网上可查、永久存档、快速稳妥,回国发展,考公务员,落户,进国企,外企,创业,无忧愁) ◆办理各国各大学文凭(世界名校一对一专业服务,可全程监控跟踪进度) ◆提供整套申请学校材料 ◆可以提供钢印、水印、烫金、激光防伪、凹凸版、最新版的普利茅斯大学毕业证、百分之百让您绝对满意、设计,印刷,DHL快递;毕业证、成绩单7个工作日,真实大使馆教育部认证2个月。 【真实可查】---【永久存档】---【安全可靠】---【值得信赖】 八年从业经验,专业指导,私人定制,倾心为您解决留学毕业回国各种疑难问题 <1>教育部学历学位认证服务: 做到真实永久存档，网上轻易可查，绝对对客户的资料进行保密，登录核实后再付款。 <2>为什么您的学位需要在国内进一步认证？ 二：留信认证的作用 1：该专业认证可证明留学生真实留学身份。 2：同时对留学生所学专业等级给予评定。 3：国家专业人才认证中心颁发入库证书 4：这个入网证书并且可以归档到地方 5：凡是获得留信网入网的信息将会逐步更新到个人身份内，将在公安部网内查询个人身份证信息后，同步读取人 才网入库信息。 6：个人职称评审加20分。 7：个人信誉贷款加10分。 8：在国家人才网主办的全国网络招聘大会中纳入资料，供国家500强等高端企业选择人才。
      wfe45345 in Members Tank & Specs
    4. 0

      办理!!美国BU毕业证*成绩单＠Q微信751558146贝勒大学(本科/硕士)毕业证成绩单*BU学位证书文凭各大学保录取Baylor University

      办理!!美国BU毕业证*成绩单＠Q微信751558146贝勒大学(本科/硕士)毕业证成绩单*BU学位证书文凭各大学保录取Baylor University办理!!美国BU毕业证*成绩单＠Q微信751558146贝勒大学(本科/硕士)毕业证成绩单*BU学位证书文凭各大学保录取Baylor Unive 【实体公司】QQ/微信751558146办理毕业证，成绩单，教育部学历学位认证，使馆认证，归国人员证明，修改成绩单+信封申请学校，offer录取通知书，在读证明，普利茅斯大学学位证书，Plymouth毕业文凭。 ★★主营项目： ◆办理真实使馆公证(即留学回国人员证明,免费申请货后付款,不成功不收费!!!) ◆办理教育部国外学历学位认证。(网上可查、永久存档、快速稳妥,回国发展,考公务员,落户,进国企,外企,创业,无忧愁) ◆办理各国各大学文凭(世界名校一对一专业服务,可全程监控跟踪进度) ◆提供整套申请学校材料 ◆可以提供钢印、水印、烫金、激光防伪、凹凸版、最新版的普利茅斯大学毕业证、百分之百让您绝对满意、设计,印刷,DHL快递;毕业证、成绩单7个工作日,真实大使馆教育部认证2个月。 【真实可查】---【永久存档】---【安全可靠】---【值得信赖】 八年从业经验,专业指导,私人定制,倾心为您解决留学毕业回国各种疑难问题 <1>教育部学历学位认证服务: 做到真实永久存档，网上轻易可查，绝对对客户的资料进行保密，登录核实后再付款。 <2>为什么您的学位需要在国内进一步认证？ 二：留信认证的作用 1：该专业认证可证明留学生真实留学身份。 2：同时对留学生所学专业等级给予评定。 3：国家专业人才认证中心颁发入库证书 4：这个入网证书并且可以归档到地方 5：凡是获得留信网入网的信息将会逐步更新到个人身份内，将在公安部网内查询个人身份证信息后，同步读取人 才网入库信息。 6：个人职称评审加20分。 7：个人信誉贷款加10分。 8：在国家人才网主办的全国网络招聘大会中纳入资料，供国家500强等高端企业选择人才。 sity办理!!美国BU毕业证*成绩单＠Q微信751558146贝勒大学(本科/硕士)毕业证成绩单*BU学位证书文凭各大学保录取Baylor University
      wfe45345 in Members Tank & Specs
    5. 0

      UWO Diploma毕业证,西安大略大学毕业证——Q微信751558146￥加拿大,毕业证,学位证,文凭,学历认证,留学认证,教育部认证,University of Western Ontario

      UWO Diploma毕业证,西安大略大学毕业证——Q微信751558146￥加拿大,毕业证,学位证,文凭,学历认证,留学认证,教育部认证,University of Western OntarioUWO Diploma毕业证,西安大略大学毕业证——Q微信751558146￥加拿大,毕业证,学位证,文凭,学历认证,留学认证,教育部认证,University of Western OntarioUWO Diploma毕业证,西安大略大学毕业证——Q微信751558146￥加拿大,毕业证,学位证,文凭,学历认证,留学认证, 【实体公司】QQ/微信751558146办理毕业证，成绩单，教育部学历学位认证，使馆认证，归国人员证明，修改成绩单+信封申请学校，offer录取通知书，在读证明，普利茅斯大学学位证书，Plymouth毕业文凭。 ★★主营项目： ◆办理真实使馆公证(即留学回国人员证明,免费申请货后付款,不成功不收费!!!) ◆办理教育部国外学历学位认证。(网上可查、永久存档、快速稳妥,回国发展,考公务员,落户,进国企,外企,创业,无忧愁) ◆办理各国各大学文凭(世界名校一对一专业服务,可全程监控跟踪进度) ◆提供整套申请学校材料 ◆可以提供钢印、水印、烫金、激光防伪、凹凸版、最新版的普利茅斯大学毕业证、百分之百让您绝对满意、设计,印刷,DHL快递;毕业证、成绩单7个工作日,真实大使馆教育部认证2个月。 【真实可查】---【永久存档】---【安全可靠】---【值得信赖】 八年从业经验,专业指导,私人定制,倾心为您解决留学毕业回国各种疑难问题 <1>教育部学历学位认证服务: 做到真实永久存档，网上轻易可查，绝对对客户的资料进行保密，登录核实后再付款。 <2>为什么您的学位需要在国内进一步认证？ 二：留信认证的作用 1：该专业认证可证明留学生真实留学身份。 2：同时对留学生所学专业等级给予评定。 3：国家专业人才认证中心颁发入库证书 4：这个入网证书并且可以归档到地方 5：凡是获得留信网入网的信息将会逐步更新到个人身份内，将在公安部网内查询个人身份证信息后，同步读取人 才网入库信息。 6：个人职称评审加20分。 7：个人信誉贷款加10分。 8：在国家人才网主办的全国网络招聘大会中纳入资料，供国家500强等高端企业选择人才。 育部认证,University of Western Ontario
      wfe45345 in Members Tank & Specs
×
×
  • Create New...