how to convert IEC power connector to connect > 1 device

[markietan]

I have a chiller that's controlled by this controller

http://www.sgreefclub.com/forum/index.php?showtopic=68111

it has a temp probe, a input 3 pin plug and a IEC output connector

currently only the chiller is connected to the output connector. i'm trying to connect both the chiller and a pump to the same output connector... any idea how i can do that?

[arcanehacker]

I have a chiller that's controlled by this controller

http://www.sgreefclub.com/forum/index.php?showtopic=68111

it has a temp probe, a input 3 pin plug and a IEC output connector

currently only the chiller is connected to the output connector. i'm trying to connect both the chiller and a pump to the same output connector... any idea how i can do that?

Don't really get it but if you want to change that connector (attached pic) to a 3pin plug, just cut it and you will see the standard 3 colour wires (earth, live and neutral).. You should know how to connect from there. 3 pin plug head can be bought in any electrical hardware stores.