Jump to content

Need Helps.. coral detaching from rock


mousecat11
 Share

Recommended Posts

  • SRC Member

Hi guys,

need some advice as my mushroom and some hard coral seem to be detaching from their rock .. the coral are all doing very well opening up.. and i have also check all my water condition and all is OK..

anyone has any idea what may have happen ? and how to stop this ?

thanks in advance

My 2ft Tank

Tank specification ;

1) 8 mm glass with external overflow tank

2) 8 mm sump tank

3) Main return pump - AB 3000 ( 45 W )

4) Chiller main return pump - AB 2000i ( 18 W )

5) Chiller - Artica titanium chiller 1/10 HP ( 75 W)

6) Wave maker - tunze 6206 nano wavebox ( 10 W only ! )

7) Skimmer - H & S skimmer with AB needle wheel ( 18 W )

8) CR - RM Calcium reactor with AB 1000 ( 10W )

9) Denitirator - RM suplur Dnitirator with maxi jet pump ( 12 W )

10 ) Lighting - Lumen Auqa LED lighting ( 48 W only ! )

11) Hailei ozone generator ( 7 W )

12) Oceanus 2 x 2ft LED lighting ( 14 W) for chaeto planting

13) Tunze 6025 ( 6 W)

14) Skimz FR with rowa

TOTAL ; 263 W !!!

Link to comment
Share on other sites

  • SRC Member

can we detach the coral back to the rock and will it grow ?

My 2ft Tank

Tank specification ;

1) 8 mm glass with external overflow tank

2) 8 mm sump tank

3) Main return pump - AB 3000 ( 45 W )

4) Chiller main return pump - AB 2000i ( 18 W )

5) Chiller - Artica titanium chiller 1/10 HP ( 75 W)

6) Wave maker - tunze 6206 nano wavebox ( 10 W only ! )

7) Skimmer - H & S skimmer with AB needle wheel ( 18 W )

8) CR - RM Calcium reactor with AB 1000 ( 10W )

9) Denitirator - RM suplur Dnitirator with maxi jet pump ( 12 W )

10 ) Lighting - Lumen Auqa LED lighting ( 48 W only ! )

11) Hailei ozone generator ( 7 W )

12) Oceanus 2 x 2ft LED lighting ( 14 W) for chaeto planting

13) Tunze 6025 ( 6 W)

14) Skimz FR with rowa

TOTAL ; 263 W !!!

Link to comment
Share on other sites

  • SRC Member

mushrooms detaching from rocks could be due to too high flow, or insufficient lighting in my opinion.. from my experiences with them, they like to move around to find a optimum location.. if not, they just detach and float away in search of a better location.. just my opinion from my experiences, no hard facts as proof though.. :)

Link to comment
Share on other sites

  • SRC Member
mushrooms detaching from rocks could be due to too high flow, or insufficient lighting in my opinion.. from my experiences with them, they like to move around to find a optimum location.. if not, they just detach and float away in search of a better location.. just my opinion from my experiences, no hard facts as proof though.. :)

Thanks for sharing... but my bubble seem to be slowly detaching from the rock too..

strange ?

My 2ft Tank

Tank specification ;

1) 8 mm glass with external overflow tank

2) 8 mm sump tank

3) Main return pump - AB 3000 ( 45 W )

4) Chiller main return pump - AB 2000i ( 18 W )

5) Chiller - Artica titanium chiller 1/10 HP ( 75 W)

6) Wave maker - tunze 6206 nano wavebox ( 10 W only ! )

7) Skimmer - H & S skimmer with AB needle wheel ( 18 W )

8) CR - RM Calcium reactor with AB 1000 ( 10W )

9) Denitirator - RM suplur Dnitirator with maxi jet pump ( 12 W )

10 ) Lighting - Lumen Auqa LED lighting ( 48 W only ! )

11) Hailei ozone generator ( 7 W )

12) Oceanus 2 x 2ft LED lighting ( 14 W) for chaeto planting

13) Tunze 6025 ( 6 W)

14) Skimz FR with rowa

TOTAL ; 263 W !!!

Link to comment
Share on other sites

  • SRC Member
Hi guys,

need some advice as my mushroom and some hard coral seem to be detaching from their rock .. the coral are all doing very well opening up.. and i have also check all my water condition and all is OK..

anyone has any idea what may have happen ? and how to stop this ?

thanks in advance

Usually means that the flow is too much. LPS like moderate flow, but not so much that the coral looks as if its being torn off its rock. Try and move it to an area with less direct flow if you can.

Link to comment
Share on other sites

  • 2 weeks later...
  • SRC Member

how to judge if the flow is too strong or ?

My 2ft Tank

Tank specification ;

1) 8 mm glass with external overflow tank

2) 8 mm sump tank

3) Main return pump - AB 3000 ( 45 W )

4) Chiller main return pump - AB 2000i ( 18 W )

5) Chiller - Artica titanium chiller 1/10 HP ( 75 W)

6) Wave maker - tunze 6206 nano wavebox ( 10 W only ! )

7) Skimmer - H & S skimmer with AB needle wheel ( 18 W )

8) CR - RM Calcium reactor with AB 1000 ( 10W )

9) Denitirator - RM suplur Dnitirator with maxi jet pump ( 12 W )

10 ) Lighting - Lumen Auqa LED lighting ( 48 W only ! )

11) Hailei ozone generator ( 7 W )

12) Oceanus 2 x 2ft LED lighting ( 14 W) for chaeto planting

13) Tunze 6025 ( 6 W)

14) Skimz FR with rowa

TOTAL ; 263 W !!!

Link to comment
Share on other sites

  • SRC Member

see whether ur mushrooms discs are uplifted or flying ornot lor.. they should be resting and opening up nicely..

Link to comment
Share on other sites

  • SRC Member

it is not actually flying up or lifted.. and it do open up fully.. that puzzle me too..

My 2ft Tank

Tank specification ;

1) 8 mm glass with external overflow tank

2) 8 mm sump tank

3) Main return pump - AB 3000 ( 45 W )

4) Chiller main return pump - AB 2000i ( 18 W )

5) Chiller - Artica titanium chiller 1/10 HP ( 75 W)

6) Wave maker - tunze 6206 nano wavebox ( 10 W only ! )

7) Skimmer - H & S skimmer with AB needle wheel ( 18 W )

8) CR - RM Calcium reactor with AB 1000 ( 10W )

9) Denitirator - RM suplur Dnitirator with maxi jet pump ( 12 W )

10 ) Lighting - Lumen Auqa LED lighting ( 48 W only ! )

11) Hailei ozone generator ( 7 W )

12) Oceanus 2 x 2ft LED lighting ( 14 W) for chaeto planting

13) Tunze 6025 ( 6 W)

14) Skimz FR with rowa

TOTAL ; 263 W !!!

Link to comment
Share on other sites

  • SRC Member

sound like too high flow for their liking and parameters should be ok if they do open out... if repositioning is difficult [i know ;)], u can tilted the wavemaker upwards or aim the direct flow towards the wall... the last one will be to have a lower rating wavemaker...

BTW, what is your wavemaker rating? I'm just using a K1 to service the 2' width of my tank nicely... Do you see that my feather head is all tilted?

post-2911-1206668023.jpg

:) Greeting :)

Tank: 4' by 2' by 2' (CR antique)

Sump: 3' include 1' refuigm

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share



×
×
  • Create New...