Jump to content

JBJ Nano 12G


Richie13
 Share

Recommended Posts

  • SRC Member

Hi Guys,

I'm new to marine set up.

My tank already set up for 1.1/2 months.

There are bubbles on the rock and sand bed and also the rock turn brown in colour.

Can anybody please advice.

Thanks!

My Tank

JBJ Nano Cube 12G

Fission Protein Skimmer

Resun CL 280 Chiller

My Tank Reading

Salinity: 1.022

KH: 196.9(11 drops)

PH: 7.8

Amonia

Nitrite: 0

Nitrate: 20

Calcium: 400

My Tank Residents

1x Blue Damsel

2x Firefish

1x Maroon Clown

1x Scooter Blenny

1x Yellow Watchman Goby

1x Banded Coral Shrimp

2x Bumble Bee Shrimp

3x Feather Duster

3x Dwarf Blue Leg Hermit Crab

3x Nassarius Snail

1x Porcelain Anemone Crab

2x Scarlet Skunk Cleaner Shrimp

2x Sebae Anemone

aquatronica7na.gif

Main Tank - DECOMMISSIONED ON 24.01.11

48"x24"x26" 12mm thick starfire crystal glass(3 sided) EOS with Black Silicon(Germany)

Sump Tank

32"x15"x20" complete with egg crate, bio-ball, top up reservoir

Equipments

Return Pump: AquaBee up7000

Skimmer: Skimz Monzter sm200 with AquaBee pin wheel and AquaBee up2000(Germany) as feed pump

CR: Skimz Monzter CM150 powered with AquaBee 2000i(Germany), solonoid valve and CO2 tank

FR: Skimz 150

MH Lighting: 2x250W Lumen bright(USA) MH pendant with 2x250W 12000k Reeflux bulb(USA), 250W Coralvue (USA) dimmable ballast

T5 Lighting: 2x54w ATI(Germany) high output T5 bulb with aluminium stand

Controller: Aquatronica ACS ADVANCE Package

Dosing: Aquatronica Dosing Pumps-ACQ450

Link to comment
Share on other sites

  • SRC Member

KH: 196.9(11 drops)

Wat test kit u using T_T ?

6x2x2.5 FOWLR

Skimmer - Recirculating Custom Beckett Fr - Skimz Fr Return - OR6500/1262 Wavemaker - Tunze 6060 x 2 Light - 2x5ft FL Blue+White

Chiller - CL650

4x4x2 SPS

Skimmer - DeltecAP851 Fr - Skimz FR Return - OR6500 Wavemaker - 2xTunze wavebox +Ts24 Light - 3x250w MH + 8 ATi t5

CR - Deltec pF601s Chiller - Arctica Titanium Commercial Chiller

3.5x2x2 REEF

Skimmer - HnS150-2001 Fr - Skimz Fr Wavemaker - Tunze Ts 24 Return - 1262 Lights - Solite 2x150W MH + 4 Ati T5 CR - Skimz CR NR - Nr1000 Chiller - Arctica Titanium 1/5

Link to comment
Share on other sites

  • SRC Supporter

U need a wavemaker

My little ocean
Mix Reef-Main tank 30 inches Length x 32 inches Width x 18 inches Height
2 X Skim DC return pump
Aquabee 2000 chiller feeder

Hailea 1/2 Chiller
1 X Tunze nano wavebox

2 X EcoTech Marine Vortech MP10W
Deltec skimmer - Internal
Lumenarc 400watt 12K Reeflux

8 X T5 ATI Powermodule
Prolifux control with external touchscreen display
Refugium keeping chaeto

Link to comment
Share on other sites

  • SRC Member

KH: 196.9(11 drops)

Wat test kit u using T_T ?

I'm using API KH & GH Test Kit.

According to the chart, 11 drops = 196.9ppm KH.

Forgotten to add my Amonia reading is 0.

aquatronica7na.gif

Main Tank - DECOMMISSIONED ON 24.01.11

48"x24"x26" 12mm thick starfire crystal glass(3 sided) EOS with Black Silicon(Germany)

Sump Tank

32"x15"x20" complete with egg crate, bio-ball, top up reservoir

Equipments

Return Pump: AquaBee up7000

Skimmer: Skimz Monzter sm200 with AquaBee pin wheel and AquaBee up2000(Germany) as feed pump

CR: Skimz Monzter CM150 powered with AquaBee 2000i(Germany), solonoid valve and CO2 tank

FR: Skimz 150

MH Lighting: 2x250W Lumen bright(USA) MH pendant with 2x250W 12000k Reeflux bulb(USA), 250W Coralvue (USA) dimmable ballast

T5 Lighting: 2x54w ATI(Germany) high output T5 bulb with aluminium stand

Controller: Aquatronica ACS ADVANCE Package

Dosing: Aquatronica Dosing Pumps-ACQ450

Link to comment
Share on other sites

  • SRC Member

U need a wavemaker

I tried using a Hydor Koralia 1 but it's too strong for my tank.

Everything starts flying around. Started a sand storm in the tank!

aquatronica7na.gif

Main Tank - DECOMMISSIONED ON 24.01.11

48"x24"x26" 12mm thick starfire crystal glass(3 sided) EOS with Black Silicon(Germany)

Sump Tank

32"x15"x20" complete with egg crate, bio-ball, top up reservoir

Equipments

Return Pump: AquaBee up7000

Skimmer: Skimz Monzter sm200 with AquaBee pin wheel and AquaBee up2000(Germany) as feed pump

CR: Skimz Monzter CM150 powered with AquaBee 2000i(Germany), solonoid valve and CO2 tank

FR: Skimz 150

MH Lighting: 2x250W Lumen bright(USA) MH pendant with 2x250W 12000k Reeflux bulb(USA), 250W Coralvue (USA) dimmable ballast

T5 Lighting: 2x54w ATI(Germany) high output T5 bulb with aluminium stand

Controller: Aquatronica ACS ADVANCE Package

Dosing: Aquatronica Dosing Pumps-ACQ450

Link to comment
Share on other sites

U need a wavemaker

I tried using a Hydor Koralia 1 but it's too strong for my tank.

Everything starts flying around. Started a sand storm in the tank!

I think you can get those Hydor PICO pump those for table fountain, I think this is quite suitable for your 12 gallon. Did you check your PO4? If your PO4 on high side put PO4 removal media on the filter chamber to help to reduce it.

RED SEA MAX - BLACK, JBJ ARCTICA DBA-075, HYDOR PRIME 30, VORTECH MP10

Link to comment
Share on other sites

  • SRC Member
KH: 196.9(11 drops)

Wat test kit u using T_T ?

I'm using API KH & GH Test Kit.

According to the chart, 11 drops = 196.9ppm KH.

Forgotten to add my Amonia reading is 0.

aquatronica7na.gif

Main Tank - DECOMMISSIONED ON 24.01.11

48"x24"x26" 12mm thick starfire crystal glass(3 sided) EOS with Black Silicon(Germany)

Sump Tank

32"x15"x20" complete with egg crate, bio-ball, top up reservoir

Equipments

Return Pump: AquaBee up7000

Skimmer: Skimz Monzter sm200 with AquaBee pin wheel and AquaBee up2000(Germany) as feed pump

CR: Skimz Monzter CM150 powered with AquaBee 2000i(Germany), solonoid valve and CO2 tank

FR: Skimz 150

MH Lighting: 2x250W Lumen bright(USA) MH pendant with 2x250W 12000k Reeflux bulb(USA), 250W Coralvue (USA) dimmable ballast

T5 Lighting: 2x54w ATI(Germany) high output T5 bulb with aluminium stand

Controller: Aquatronica ACS ADVANCE Package

Dosing: Aquatronica Dosing Pumps-ACQ450

Link to comment
Share on other sites

  • SRC Member
U need a wavemaker

I tried using a Hydor Koralia 1 but it's too strong for my tank.

Everything starts flying around. Started a sand storm in the tank!

aquatronica7na.gif

Main Tank - DECOMMISSIONED ON 24.01.11

48"x24"x26" 12mm thick starfire crystal glass(3 sided) EOS with Black Silicon(Germany)

Sump Tank

32"x15"x20" complete with egg crate, bio-ball, top up reservoir

Equipments

Return Pump: AquaBee up7000

Skimmer: Skimz Monzter sm200 with AquaBee pin wheel and AquaBee up2000(Germany) as feed pump

CR: Skimz Monzter CM150 powered with AquaBee 2000i(Germany), solonoid valve and CO2 tank

FR: Skimz 150

MH Lighting: 2x250W Lumen bright(USA) MH pendant with 2x250W 12000k Reeflux bulb(USA), 250W Coralvue (USA) dimmable ballast

T5 Lighting: 2x54w ATI(Germany) high output T5 bulb with aluminium stand

Controller: Aquatronica ACS ADVANCE Package

Dosing: Aquatronica Dosing Pumps-ACQ450

Link to comment
Share on other sites

  • SRC Member

I think you can get those Hydor PICO pump those for table fountain, I think this is quite suitable for your 12 gallon. Did you check your PO4? If your PO4 on high side put PO4 removal media on the filter chamber to help to reduce it.

Oop... got no test kit for PO4, will go get one and check it out.

Thanks, will try out the fountain pump you recommended.

aquatronica7na.gif

Main Tank - DECOMMISSIONED ON 24.01.11

48"x24"x26" 12mm thick starfire crystal glass(3 sided) EOS with Black Silicon(Germany)

Sump Tank

32"x15"x20" complete with egg crate, bio-ball, top up reservoir

Equipments

Return Pump: AquaBee up7000

Skimmer: Skimz Monzter sm200 with AquaBee pin wheel and AquaBee up2000(Germany) as feed pump

CR: Skimz Monzter CM150 powered with AquaBee 2000i(Germany), solonoid valve and CO2 tank

FR: Skimz 150

MH Lighting: 2x250W Lumen bright(USA) MH pendant with 2x250W 12000k Reeflux bulb(USA), 250W Coralvue (USA) dimmable ballast

T5 Lighting: 2x54w ATI(Germany) high output T5 bulb with aluminium stand

Controller: Aquatronica ACS ADVANCE Package

Dosing: Aquatronica Dosing Pumps-ACQ450

Link to comment
Share on other sites

  • SRC Member

Thanks Guys! :thanks:

Thanks for the input and the pm.

Got myself a pico pump and fix it on yesterday.

This morning no more bubbles and the rocks turning back to its original colour!

Really educational in this forum!

:off: Can somebody please teach me how to post pics of my tank in this forum? Like to have some feedback from you guys! :thanks:

aquatronica7na.gif

Main Tank - DECOMMISSIONED ON 24.01.11

48"x24"x26" 12mm thick starfire crystal glass(3 sided) EOS with Black Silicon(Germany)

Sump Tank

32"x15"x20" complete with egg crate, bio-ball, top up reservoir

Equipments

Return Pump: AquaBee up7000

Skimmer: Skimz Monzter sm200 with AquaBee pin wheel and AquaBee up2000(Germany) as feed pump

CR: Skimz Monzter CM150 powered with AquaBee 2000i(Germany), solonoid valve and CO2 tank

FR: Skimz 150

MH Lighting: 2x250W Lumen bright(USA) MH pendant with 2x250W 12000k Reeflux bulb(USA), 250W Coralvue (USA) dimmable ballast

T5 Lighting: 2x54w ATI(Germany) high output T5 bulb with aluminium stand

Controller: Aquatronica ACS ADVANCE Package

Dosing: Aquatronica Dosing Pumps-ACQ450

Link to comment
Share on other sites

  • 2 months later...
Hi Guys,

I'm new to marine set up.

My tank already set up for 1.1/2 months.

There are bubbles on the rock and sand bed and also the rock turn brown in colour.

Can anybody please advice.

Thanks!

My Tank

JBJ Nano Cube 12G

Fission Protein Skimmer

Resun CL 280 Chiller

My Tank Reading

Salinity: 1.022

KH: 196.9(11 drops)

PH: 7.8

Amonia

Nitrite: 0

Nitrate: 20

Calcium: 400

My Tank Residents

1x Blue Damsel

2x Firefish

1x Maroon Clown

1x Scooter Blenny

1x Yellow Watchman Goby

1x Banded Coral Shrimp

2x Bumble Bee Shrimp

3x Feather Duster

3x Dwarf Blue Leg Hermit Crab

3x Nassarius Snail

1x Porcelain Anemone Crab

2x Scarlet Skunk Cleaner Shrimp

2x Sebae Anemone

Hi Richie13, I just set-up a 10g nano-tank. May I know where to get the Fission Protein Skimmer?

:thanks:

Link to comment
Share on other sites

  • 4 weeks later...
Can get it from Marine Depot .com

hi bro, more interesting is how it fits? Cos from this link below, the size(dimensions) stated like cant fit in the back compartments of nano cube lei... unless put in the main tank...

http://www.marineandreef.com/shoppro/fission_skimmer.htm

maybe bro richie can help to enlighten us here...

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share



  • Join us on the largest Reefing community in Asia!

    Sign up and share your reefing journey with us, make friends and get helps from the community .

     

  • Topics

  • Latest Update

    1. 0

      专业制作美国普渡大学西拉法叶校区大学毕业证》Q/微信751558146丨办理普渡大学西拉法叶校区毕业证成绩单,文凭留信网认证,保录取Purdue University,West Lafayette

    2. 0

      〖国外毕业证书〗加拿大MSVU圣文森山大学毕业证成绩单〖Q/微信751558146〗办理文凭教育部学历学位认证Mount Saint Vincent University

    3. 0

      专业制作美国福特汉姆大学毕业证》Q/微信751558146丨办理福特汉姆大学毕业证成绩单,文凭留信网认证,保录取Fordham University

    4. 0

      〖国外毕业证书〗加拿大McGill麦吉尔大学毕业证成绩单〖Q/微信751558146〗办理文凭教育部学历学位认证McGill University

    5. 0

      专业制作美国PITT毕业证》Q/微信751558146丨办理匹兹堡大学毕业证成绩单,文凭留信网认证,保录取University of Pittsburgh

×
×
  • Create New...