Timers

[vidul]

Hi all,

would appreciate if someonce could help me to use this time.

Instructions on the pack are not clear.

Using primarily for lights.

Regards,

Vidul

[xersion]

its actually very simple.. first u pull all the small pin up.. then u look at the time that u wan to set and press it down.. next u just turn the timing that ur clock show to the arrow and u plug it in.. its that simple

[searching4dan]

lol, i am using the same timer as u b4

simple, the arrow knob, u juz spin it to the same time ur clock shows..

then from there, say u wanna set the time to ON from 11am to 11pm

u push all the pins down from 11 - 23

on pin is 15mins if i remember clearly..

a overwrite button on the side for u to overwrite the timer @ anytime..

[mansiz]

I'm using this timer also, LOL. Yup thats right, the black triangular points the current time. Just turn the time manually to the correct time as of now, one bar is 15 mins, so if it's 9.15am, then turn it to 9 and one bar forward. The pins are down means it's the off time, the pin are up means it's open time. (Upmeans towards the circle printed time, down means away from the circle printed time). Another thing you have to take note, there is a switch at the right side, be sure to move it to timer mode.