Jump to content

Qwank's 12g nano cube


qwank
 Share

Recommended Posts

  • Replies 143
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

  • SRC Member
Hi qwank,

May I know how do you get those cool purple algae sticking onto your tank? Thanks.

Regards,

bgrking

i dont know how the coraline algea grows. my friend has a 55g for 7 years and he has no coraline. maybe its because of the MH and my calcium is at 400. its not good when it gets on the glass though i have to scrape it off with a razor blade.

12g Nanocube 70w MH + 36w actinics in the stock hood! 2 years old

24g Nanocube 70w MH + 60w actinics in the stock hood! NEW!

Link to comment
Share on other sites

No need razor blade.

Any plastic card will do the job

6.5 * 2 * 2 + 3.75 * 1.5 *1.5,(Decomn on 14/9/08)
4*2*2 + 2.5*1.25*1.25 (Decomn on 1/8/09)
5*2*2 (Fully LED light system, 140 3 watt SSC leds with 60 degree lens)(Decomm)
2.5*2*2(Fully LED Light System,96 3 watt SSC leds with 60 degree lens)(Decomm)

5*2.5*2(LED only)

Eheim return 1 * pump

1 HP Daikin compressor with cooling coil
2 Jebao OW40, 1 ecotech MP40,
1X6085 Tunze wm,

1 CURVE 7 Skimmer

  1 DIY 80 led control by Bluefish mini 

1 radion XR30W G2, 2 Radion XR15G3

Sump area lite by 5 ft T5 , 6 * SSC 3 watt red LED for refugium

1 Full spectrum E27 led light

1 CR control by bubble count

Start No Water Change since 1st Dec 2016

Add new 2.5x2x 1.5 ft 

 nLekOfpYts.jpg
[/quote]


 

Link to comment
Share on other sites

  • SRC Member

update: the extra pump is working great! the acro is completly open! i'm very happy with the flow in the tank. makes me want to go buy more SPS tonight. now i just have to find a way to hide the pump. tried to get a picture but they never come out good.

12g Nanocube 70w MH + 36w actinics in the stock hood! 2 years old

24g Nanocube 70w MH + 60w actinics in the stock hood! NEW!

Link to comment
Share on other sites

FTS Please

6.5 * 2 * 2 + 3.75 * 1.5 *1.5,(Decomn on 14/9/08)
4*2*2 + 2.5*1.25*1.25 (Decomn on 1/8/09)
5*2*2 (Fully LED light system, 140 3 watt SSC leds with 60 degree lens)(Decomm)
2.5*2*2(Fully LED Light System,96 3 watt SSC leds with 60 degree lens)(Decomm)

5*2.5*2(LED only)

Eheim return 1 * pump

1 HP Daikin compressor with cooling coil
2 Jebao OW40, 1 ecotech MP40,
1X6085 Tunze wm,

1 CURVE 7 Skimmer

  1 DIY 80 led control by Bluefish mini 

1 radion XR30W G2, 2 Radion XR15G3

Sump area lite by 5 ft T5 , 6 * SSC 3 watt red LED for refugium

1 Full spectrum E27 led light

1 CR control by bubble count

Start No Water Change since 1st Dec 2016

Add new 2.5x2x 1.5 ft 

 nLekOfpYts.jpg
[/quote]


 

Link to comment
Share on other sites

oh i read the thermometer wrong.!!!  :paiseh:  its actually only 27*C   which its 80*F. 

sorry for the confusion.  so it actually does stay rather cool. 

the evaporation is not a lot.  its about  0.2-.03 liter a day.

:shock: Running MH with only 2 fans on a 12g tank able to maintain 27C!!! :bow:

Link to comment
Share on other sites

  • 4 months later...
  • SRC Member

Hey everyone! havnt been here in a while. the tank is still doing great. i had to move it to my parents house while we build a new house. everything moved over without anythingn dying. once my new house is done i will be hopefully buying a bigger tank, maybe 75gallon or bigger, and converting this nano into a seahorse tank.

12g Nanocube 70w MH + 36w actinics in the stock hood! 2 years old

24g Nanocube 70w MH + 60w actinics in the stock hood! NEW!

Link to comment
Share on other sites

  • 1 month later...
  • SRC Member

Its been about 6 months since i've taken any pics of the tank. so heres some new ones. the tank is now 13 months old and still going strong. i lost 2 cleaner shrimp in 2 months due to my purple pseuedo eating them. so as soon as i find a home for him he's gone and getting replaced with another clown. i havnt been running the fuge since the summer time because i was having a huge cyno issue in it. i think theres not enough flow back there. it was working great for months before i had the problem. but my nitrates are around 5 without it so i'm not too concered at the moment. the tank is at my parents house while my new house is being built so i havnt really had time to mess with anything. the only thing that died during the move was the purple corraline on the back wall, and now green coraline is growing in its place.

let me know what you think

DSC06324.jpg

DSC06339.jpg

DSC06336.jpg

DSC06322.jpg

DSC06321.jpg

12g Nanocube 70w MH + 36w actinics in the stock hood! 2 years old

24g Nanocube 70w MH + 60w actinics in the stock hood! NEW!

Link to comment
Share on other sites

  • 2 months later...
  • 8 months later...
  • SRC Member
Hi there, nice tank you have. Please continue with the updates and let us know the current situation of your tank.

hey guys!

my tank is doing great. my acro died a few weeks ago when i lost power for 26 hours. the tank got too cold i guess. but the good news is i got a 24g nano cube now. i'll be adding metal halides and actinics too it just like in the 12g and move my stuff over into it.

today i picked up a 100w stealth heater and 24 gallons of distilled water. i did a 1 gallon water change in the 12g and put the old water in the new tank to get some bacteria in there. the new tank took about 19.5 gallons, it's got nothing in it but the pump, heater and nano koralia.

heres a pic of the size difference between the 12 and the 24. and the second one is the tank with the water in it. I know boring. :P

GetAttachmentaspx.jpg

GetAttachmentaspx1.jpg

12g Nanocube 70w MH + 36w actinics in the stock hood! 2 years old

24g Nanocube 70w MH + 60w actinics in the stock hood! NEW!

Link to comment
Share on other sites

  • SRC Member

thats 23 pounds of live rock i got off another member of my local reef club. i will be adding more rock out of my other tank as well. tomorrow or tuesday i will get some live sand.

12g Nanocube 70w MH + 36w actinics in the stock hood! 2 years old

24g Nanocube 70w MH + 60w actinics in the stock hood! NEW!

Link to comment
Share on other sites

  • SRC Member
GetAttachment4.jpg

Is tat a sps colony?

1ft cube with IOS [the low tech tank]

1. JBJ C-breeze to keep temp hovering around 27-28'C

2. LED clip on - 120 bulbs

-skimmer-less-

My 3 humble equipments that keeps my tank running... [DRIED OUT]

1. The RSM itself of course 2.My NEW Deltec MCE-300 Skimmer 3. My trusty Arctica Chiller

Tank parameters:

Temperature maintained at 25.3'C to 24.7'C

No3: 10ppm(b4 the use of the deltec skimmer)

No3: 5ppm (after use of the skimmer)

Others? too lazy to measure...LOL

Camera- EOS 50D

Link to comment
Share on other sites

  • SRC Member
Is tat a sps colony?

it used to be. that was in my other tank. we had a power outage a few weeks ago and the tank got very cold and it died. I'm really upset it died, i've had it for 18 months and it was growing really well. i put it in the new tank for decoration while it cycles. :)

12g Nanocube 70w MH + 36w actinics in the stock hood! 2 years old

24g Nanocube 70w MH + 60w actinics in the stock hood! NEW!

Link to comment
Share on other sites

  • SRC Member

the lights are in. i'm still making sure my temps will be stable. i will be running a 10k 70w metal halide with 1x36w and 1x24w metal halide. right now theres a 14k MH and 2 50/50 power compacts. also the stock moon lights are still functional.

heres pics:

DSC01265.jpg

DSC01264.jpg

DSC01263.jpg

DSC01271.jpg

DSC01270.jpg

DSC01276.jpg

DSC01278.jpg

12g Nanocube 70w MH + 36w actinics in the stock hood! 2 years old

24g Nanocube 70w MH + 60w actinics in the stock hood! NEW!

Link to comment
Share on other sites

  • SRC Member
Dude, keep it going! Whats your tank running on? Heater? I really like your scape, with the cave in the middle.

Also, is the SPS totally dead?

not much for updates yet. tank is still cycleing. i put in 6 hermits and 6 snails to start cleaning up the diatoms. yesterday i took the hydorflo out of my 12g and put it in the 24g. i removed 3 of the blades in it to improve flow. the heater is a 100w stealth. tank is running at a steady 80*F wih the lights on and off.

next i think i am going to upgrade the pump to a maxijet 1200. i was going to keep the stock one originally but the cord is too thick. i like the smaller maxijet cord better. its easier to run through the grommets in the hood.

I'm also looking at getting the reefkeeper 2 to control all the equipment. i like how it will shut the lights of is the tank temp gets too high. or shut the heater off if it sticks.

yes, the SPS was dead before i put it in the tank. it was doing great in my 12g until we lost power for over a day. the tank got really cold and the next day the SPS died.

12g Nanocube 70w MH + 36w actinics in the stock hood! 2 years old

24g Nanocube 70w MH + 60w actinics in the stock hood! NEW!

Link to comment
Share on other sites

  • SRC Member
nice. keep it up. really really want to see fish inside there >.<

Patience :lol:

12g Nanocube 70w MH + 36w actinics in the stock hood! 2 years old

24g Nanocube 70w MH + 60w actinics in the stock hood! NEW!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share




  • Join us on the largest Reefing community in Asia!

    Sign up and share your reefing journey with us, make friends and get helps from the community .

     

  • Topics

  • Latest Update

    1. 0

      WTS little red Ferrari Acro

    2. 2

      WTS/T Radioactive BN

    3. 0

      WTS Tanks, Equipment

    4. 4

      Berghia Nudibranch for Sale - $30

×
×
  • Create New...