The Big Day! 5x2.5x2.5

[Tanggy]

Hi Bros. As per all the planning, the big day has come. The tank installation! ke ke

A little recap of the plans before the end results.

[Tanggy]

Outline where it will sit

[Tanggy]

Its Finally Here!

[Tanggy]

The Chengai frame. 8 fix support per my request. 3 by 2 inch. me kiasu. he he. This would be a 9 ft long cabinet with 5ft tank with a external overflow.

[jervismun]

Another exciting setup... all the best

[bluezing]

sweet! cant wait to see more pics!!!

[Tanggy]

The stand. at its resting place.

[Tanggy]

The piping behind the stand is a water inlet and outlet plus copper tubing for the Chiller. The chiller will be located in the balcony. Do not want the hot air from the chiller in my living room.

[yvoneysl]

The piping behind the stand is a water inlet and outlet plus copper tubing for the Chiller. The chiller will be located in the balcony. Do not want the hot air from the chiller in my living room. 

What chiller r u using? inline or drop in coil type.

Just realise my Arctica 1/3 consump 1000watts...very sad news

[dr evil]

Hi Bro,

welcome back to this hobby.......so, what are the equipment u are using? look like a big project

[Tanggy]

What chiller r u using? inline or drop in coil type.

Just realise my Arctica 1/3 consump 1000watts...very sad news

1/3 horse 1000watt? cant be wat. thought it was 250watt? I am using the OEM version of Artica 1/2 horse. Daiel. The cooler unit has been removed from the chiller to be relocated in the cabinet. It will be route via the return pump to the tank. I will be using 2 return pump. one will be connected to the cooler unit before returing to tank.

[Tanggy]

Hi Bro,

welcome back to this hobby.......so, what are the equipment u are using? look like a big project

Thanks Bros. It been a while. Great to be back ! ke ke... now jus need to look for a skimmer! any suggestion? Have alloacted a 1 inch outlet from the sump and about 2 feet of footprint in the cabinet for the skimmer.

[yvoneysl]

1/3 horse 1000watt? cant be wat. thought it was 250watt? I am using the OEM version of Artica 1/2 horse. Daiel. The cooler unit has been removed from the chiller to be relocated in the cabinet. It will be route via the return pump to the tank. I will be using 2 return pump. one will be connected to the cooler unit before returing to tank.

Sorry I think should be 805watts

MODEL- DBM 250

HP- 1/3

CAPACITY- 1000W

VOLTS- 230

AMPS- 3.5

[Tanggy]

Equipement:

Pumps:

2 x Eheim 1260 return pump

1 x Quiet One High Head 4000 pump

Lighting:

2x250watt MH (May need 3)

4x54watt antinic blue

Circulation:

2x 6060 Tunze

Chiller:

Daiel 1/2hp Chiller

Skimmer:

TBD

Calcium Reactor/Others:

TBD

[Tanggy]

View from Dinning side. The right compartment is for the external over flow, power point, water inlet/outlet and chiller inlet.

[Tanggy]

Here comes the sump tank.

[Tanggy]

The Tank has arrived.

[giantbicycle]

The longed lost. Well planned. Following up ahead to this thread

[Tanggy]

Here comes the tank. ke ke ke

[Tanggy]

[yvoneysl]

U going for BB?

[godzillaliu88]

very nice tank.

i see a box. external overflow?

[Reefzzz]

Another powerful setup....

More pics please

[jervismun]

Oh remind me so much of the thrill of looking at an empty glass tank

[Tanggy]

U going for BB?

BB?

Yup. it an external overflow. dont like to see overflow in tank. my existing has internal overflow. dont like.