Store room Sales

[tineng]

Time of the year to clear storeroom.

anyway, so stuff to sell....

First off. Selling at Ocean Motion wave maker at $400 fixed. info is a below:

Oceans Motions 4-Way (Version 3)

This is a device that will alternate the return flow to your aquarium by switching on/off 4 different outlets at regular interval (more information at ocean motion web site). Included with the 4-Way are an extra drum and all the Spears schedule 80 fittings for 1.5" inlet and 1" or 1 3/4" outlet. This 4-Way runs on 120v and I will throw in a brand new transformer ($32 value) for the eventual buyer. This set has a value of close to $700 (excluding shipping cost).

Remeber its brand new, i have not begin to use it yet....more info here

[tineng]

also got a set of 150w, those rectagular DIY type of MH with ballast for sale. Bulb has been used for a year. Comes with magnatic ballast.

Selling for $50

[tineng]

collection will be at Bedok North area. Gotten a reefer to help house the stuff for me. There will be some more items for sales as i clear my store, so watch out for this thread.

[tineng]

Water level sensor for sale also. Buy already but never use...$60.

Will post picture of the stuff later in the evening

[tineng]

Skimz waste collector - $30

[tineng]

3ft T5 HO lightset 4x39w, tubes are ATI or aquascience (cannot remeber), tubes 3 months old - S$230

[tineng]

Summary:

- Oceans Motions 4-Way (Version 3) - $400

- 150w, those rectagular DIY type of MH with ballast - $50

- Water level sensor - $60

- Skimz waste collector - $30

- 3ft T5 HO lightset 4x39w, tubes are ATI or aquascience (cannot remeber), tubes 3 months old - S$230

[tineng]

Ocean Motion

[tineng]

150w MH light set

[tineng]

the water level sensor.

[tineng]

peiseh.....wrong link to ocean motion....correct link here

Also for the top up device, the instruction and interface is in chinese.....sorry about that my non-chinese friends....

[tineng]

can't believe there are still stuff in the storeroom.....

anyway a check value (3/4 inch) that i got from reef depot. Got it sometime back (sticker peeling already...)....never had a chance to use it....S$25

[tineng]

A Preductor i got from a reefer sometime back. Will boost flow in the tank. But have to use a strong pump as the preductor will have resistance against the pump. The grey part at the back is a adoptor i think to 1 inch pipes....

[tineng]

Summary:

- Oceans Motions 4-Way (Version 3) - $400

- 150w, those rectagular DIY type of MH with ballast - $50

- Water level sensor - $60

- Skimz waste collector - $30

- 3ft T5 HO lightset 4x39w, tubes are ATI or aquascience (cannot remeber), tubes 3 months old - S$230

- Check valve - S$25

- Pre-ductor - $50

[tineng]

added a aquabee 6000 pump for sale (test a few times only). Revised the price of the T5 lights down.

Summary:

- Oceans Motions 4-Way (Version 3) - $400

- 150w, those rectagular DIY type of MH with ballast - $50

- Water level sensor - $60

- Skimz waste collector - $30

- 3ft T5 HO lightset 4x39w, tubes are ATI or aquascience (cannot remeber), tubes 3 months old - S$200

- Check valve - S$25

- Pre-ductor - $50

- Aquabee 6000 pump - $320

[piero]

added a aquabee 6000 pump for sale (test a few times only). Revised the price of the T5 lights down.

Summary:

- Oceans Motions 4-Way (Version 3) - $400

- 150w, those rectagular DIY type of MH with ballast - $50

- Water level sensor - $60

- Skimz waste collector - $30

- 3ft T5 HO lightset 4x39w, tubes are ATI or aquascience (cannot remeber), tubes 3 months old - S$200

- Check valve - S$25

- Pre-ductor - $50

- Aquabee 6000 pump - $320

Ho bro.. So the waste collector still available?

[tineng]

peiseh.....take out the waste collector....

Summary:

- Oceans Motions 4-Way (Version 3) - $400

- 150w, those rectagular DIY type of MH with ballast - $50

- Water level sensor - $60

- 3ft T5 HO lightset 4x39w, tubes are ATI or aquascience (cannot remeber), tubes 3 months old - S$200

- Check valve - S$25

- Pre-ductor - $50

- Aquabee 6000 pump - $320

[tineng]

take out the MH

Summary:

- Oceans Motions 4-Way (Version 3) - $400

- Water level sensor - $60

- 3ft T5 HO lightset 4x39w, tubes are ATI or aquascience (cannot remeber), tubes 3 months old - S$200

- Check valve - S$25

- Pre-ductor - $50

- Aquabee 6000 pump -

[tineng]

can't believe people change their mind so fast. MH back on the list...

Summary:

- Oceans Motions 4-Way (Version 3) - $400

- 150w, those rectagular DIY type of MH with ballast - $50

- Water level sensor - $60

- 3ft T5 HO lightset 4x39w, tubes are ATI or aquascience (cannot remeber), tubes 3 months old - S$200

- Check valve - S$25

- Pre-ductor - $50

- Aquabee 6000 pump - $320

[tineng]

add in a tunze manget holder (for up to 12mm)

Summary:

- Oceans Motions 4-Way (Version 3) - $400

- 150w, those rectagular DIY type of MH with ballast - $50

- Water level sensor - $60

- 3ft T5 HO lightset 4x39w, tubes are ATI or aquascience (cannot remeber), tubes 3 months old - S$200

- Check valve - S$25

- Pre-ductor - $50

- Aquabee 6000 pump - $320

- Tunze Magnet Holder - $35

[tineng]

Check valve collected.

Summary:

- Oceans Motions 4-Way (Version 3) - $400

- 150w, those rectagular DIY type of MH with ballast - $50

- Water level sensor - $60

- 3ft T5 HO lightset 4x39w, tubes are ATI or aquascience (cannot remeber), tubes 3 months old - S$200

- Pre-ductor - $50

- Aquabee 6000 pump - $320

Tunze Magnet Holder - $35

[tineng]

upz

[searching4dan]

got more info on the lights?

[tineng]

T5 lights is the DE Lightings black color casing one. 150w MH, i think pictures is as above....

[tineng]

Tunze Mag holder collected.

Summary:

- Oceans Motions 4-Way (Version 3) - $400

- 150w, those rectagular DIY type of MH with ballast - $50

- Water level sensor - $60

- 3ft T5 HO lightset 4x39w, tubes are ATI or aquascience (cannot remeber), tubes 3 months old - S$200

- Pre-ductor - $50

- Aquabee 6000 pump - $320