Jump to content

Bio Balls - Good or bad??


Recommended Posts

  • SRC Member

i used bioballs for a while. have removed them since. don't know why. have filled the ios filter media compartment with coral chips and ceremic rings.

Link to comment
Share on other sites

  • SRC Member
i used bioballs for a while. have removed them since. don't know why. have filled the ios filter media compartment with coral chips and ceremic rings.

They serve no difference in function. They wull still trap detritus and increase nitrate levels.

Bioballs are very efficient at nitrifying ammonia and nitrite but lack denitrifying capabilities to convert nitrate to nitrogen gas, that's why it has fallen out of favour with reef tanks over the NNR (natural nitrate reduction) methods like Berlin, DSB or Jaubert (plenum).

post-36-1093875548.jpg

Warning: Heavy handed moderator in operation. Threads and post are liable to be deleted or moved without prior notification.

Moderator's prerogative will be enforced.

Any grievances or complains should be addressed to The Administrator.

http://www.sgreefclub.com/forum/uploads/post-36-1073276974.gif post-36-1073276974.gif

Link to comment
Share on other sites

  • SRC Member
:P

Thanx bros for the advise. I shall use it in my tropical tank then...... For my marine setup, I'll get coral chips to add into my IOS.

i think Tanzy means coral chips will as well....

removed mine recently, n since monitoring for a month, realli see a drop in nitrate levels... :)

Link to comment
Share on other sites

  • SRC Member
then wat should we put in the IOS?

GOOD Question!!!

I also want to know what to put in the sump since some ppl are saying Bioball, BioRing, CoralChip will be a NO3 factory...

Tank 4x2x2.5

Link to comment
Share on other sites

  • SRC Member

Does your IOS have a sump? My friend bought a tank with a IOS but its overflow to the back of the tank with all the filtering compartments divided there.... but anyway, he did use the compartment to place his cotton filter -> Skimmer -> return pump with a DSB in the main tank.... and boy it was a ugly tank with 5-6 inches of sand back showing cause he don't have a custom make cabinet.... no offends to anyone with such a setup.... or maybe oredi offended :P:lol:

:peace:

Link to comment
Share on other sites

Leave the overflow compartment empty.

Use a stockman pipe fitting to raise water level so water won't crash down and make noise.

Overtime, it will be a refugium where a lot of pods will flourish due to lack of predation.

Link to comment
Share on other sites

  • SRC Member

sorry to be hi jacking this thread andez07 but i've been following this thread pretty closely and i figured that my filter media compartment of my ios is 'wrong'. as seen in the picture below, i've got quite a bit of coral chips and ceremic rings alike. which supposedly produce a crap load of NO3. so what should i do to the filter media? i quote AT, 'Leave the overflow compartment empty.

Use a stockman pipe fitting to raise water level so water won't crash down and make noise.

Overtime, it will be a refugium where a lot of pods will flourish due to lack of predation. '

something which puzzles me though, if there isn't filter media, then where's 'filteration' going to take place? pardon my ignorance, but i'd appreciate any kind of advise. thank you.

post-6-1066375447.jpg

Link to comment
Share on other sites

  • SRC Member

I think AT is assuming that you have a sump w/refugium? yes AT? hence hightlighting the importance of a picture and detail discription. :D

In the market, there are 2 type of IOS... one overflow into a compartment with holes drill into the base of the tank which is then connected to the sump with pipes.

The second is one that overflows into compartments meant for filtering INSIDE the tank.... For marine, Most of us uses the one with sump.... well many reefers use the second one too?! :lol:

In your case with filter compartments build inside the tank, you can use a few other alternatives. For example, use a external canister filter, use a hanging refugium (eg I-ref) and the list goes on.....

:peace:

Link to comment
Share on other sites

  • SRC Member

i blame it on my ignorance and my lack of planning. as you can see, i do not have space at the back for an i ref which i have been very tempted to get. i regret not doing a sump. but it's too late for regrets now i guess. it's going to be very tedious removing everything out, drilling holes and what not, so hence, i'll just use my ios. one way to counter the NO3 problem, correct me if i'm wrong is to do more regular water changes aye? anyhow, from the way you guys see it, what do you think should be done to my ios system. many thanks in advance.

Link to comment
Share on other sites

  • SRC Member

This is what my friend uses for his built in filtering compartments... 1st cotton filter changed regularly -> Skimmer -> return pump. then like what davwong mention, he uses LR and DSB, ugly but no choice he says......

He plan to hang a DIY overflow box behind his tank, then connect it to a sump, FYI for future upgrading plans.....

Cheers :peace:

Link to comment
Share on other sites

  • SRC Member

soggy, the ceramic & coral chips you use are ok for fish only systems when NO3 is acceptable to a certain limit. in fact the ceramic work better than the CC as it provides a bigger surface area. function wise the same as bio-balls and tanzy has pointed out, these media are very efficient at nitrifying ammonia and nitrite and turning them into less toxic nitrate.

when you deal with corals.....then you have to address the nitrate issue or you would be limited in the species you can keep.

The main filtration usually comes from Liverock (and a DSB or other NNR methods if u use one)- which is why a little more rock does benefit the tank environment. They are not just there to stack things on.

if you intend to remove your media, do it slowly (over some time) to allow the bacteria populations to adjust accordingly. with such a small compartment ,adding macro algae won't help much so don't expect miracles from it, but growing some there won't do any harm Or you can just use floss there and any chemical media that you may use in the future.

Link to comment
Share on other sites

then how will the water return to the sump if there is a massive pipe blocking its way? or is it sucked into the sump via the pipe? if so, how is that done?

sorry me damn swakoo and stupid. =\

The pipe is to extend the opening (where water flows from overflow into sump) higher up in the water level instead of right down at the bottom glass pane.

Link to comment
Share on other sites

  • SRC Member

i think i figured. you see the little curved pipe. the water flows through there. it is such so that the water level in that compartment is constant. am i right?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share



×
×
  • Create New...