Jump to content

Yellowish waters


ady
 Share

Recommended Posts

Yo Bros...

I've got a problem with my water colour. It is yellowish in colour.

Trie to do half tank water change, used activated charcoal etc...

still yellow colour. Some ppl said that it could be the lightings as I'm

using Daylight florecent bulb and some even said that it couldbe the

glass itself...

Tried to change the bulb and transfered the existing water to a spare tank.

Still yellowish colour in the spare tank. FYI, I am using fake plants, corals.

Also using lava rocks in my 4feet tank. The water has been yellowish way

before I bought the rocks.

Water conditions are very good. Stable. No fish have died for the past 8months.

Salt salinity ranging 1.021 to 1.024. Water temp: 31degree Celcius to max 32 degree Celcius

Please advise.

Thanks

Link to comment
Share on other sites

do u use drift wood for fresh water .

normally they release tannic acid which cause the yellowing of the tank.

using good activated carbon like rowacarbon should solve the problem.

if ur lighting bulb is around 6500k - 10000k , it will be yellow no matter u change new ones or using old ones. combine it with actinic blue should balance the lighting and increase viewing pleasure.

:)

2x1.5x1.5 tank

Lighting: AI hydra 52HD

Skimmer: Deltec SC 1455

Reactor: Minimax; rowaphos

Skimz  ; NP biopellets

Wave Maker: MP 40 WQD

Return pump: Eheim 1262

Chiller: Arctica 1/10 hp

 

A righteous man cares for the needs of his animal, but the kindest acts of the wicked are cruel -- Proverbs 12:10

Link to comment
Share on other sites

Yo Bro hammy...

I did not use any driftwood for my tank

Lighting wise I use OSIM 30watt floresent light.

I have used a good carcoal, but still yellow colour...

Please advise...

Thanks bro Hammy

Link to comment
Share on other sites

  • SRC Member

think the problem lies with the FL u using. try using t5.

Project R.E.

Main Tank: 48" x 18" x 24" 12mm with external overflow piping

Sump Tank: 28" x 14.5" x 12" (3 compartments)

Lightings: T5 HO - Hopar 3* 39w + ATI 2* 54w

Skimmer: Skimz Bullet Beckett

Chiller: Resun CL-650 (28 - 29 °C)

Wavemakers: 2* Seio M620 + 1* Hydor K2 (7100 litre / hr)

Fluidized Reactor: Skimz FR (currently empty)

Pumps: 1x Rio 32HF (Skimmer), 1x Rio 20HF (Return & Chiller)

Filtration: more than 80kg LRs, chaeto

Water Circulation: ~ 4000 litre / hr

Future Plans: additional wavemaker, DIY algae scrubber, DIY overflow box

Previously:

Project R : 36" x 12" x 24" 10mm reef

Link to comment
Share on other sites

  • SRC Member

hi there ady,

in marine systems, the yellowing of water within the system isnt from tannin that is leached from driftwood, but a chemical called gelvin, that is derived from breakdown of organic particles. the general recommendation is to run activated carbon on the system and try water changes to alleviate the problem. it seems like youve done both so am not sure why it hasnt worked.

did you use the carbon in an FR or in a filter bag? if you used carbon in a filter bag, you will need to place this bag in an area where water is forced to go through the filter bag to be of use. if a filter bag is just placed in the sump, water can easily flow past and around the carbon media, and will thus not be filtered by the carbon, so maybe thats a point to take note. if the problem still persists, then maybe you can try running ozone. with ozone, im sure your water will be clearer, though using more carbon should be a first step before ozone as its unnecessary expense in my opinion.

just a thought, do you have any yellow coloured corals in your system? sometimes, anemones and gonioporas, etc, are dyed to raise their selling appeal, and if yellow dye is used, this could be leeched out thereafter, which would cause yellowing of the water.

anyhows, just thinking aloud my thoughts and hope something there helps you ya.

cheers,

ian

Link to comment
Share on other sites

Can you do a test?

Fill a clear thin glass full of tank water and place it on white paper, have very white light around (sunlight is best)... put a strip of white plastic halfway into the water and see if it appears yellow underwater.

It could be your lighting as daylight tubes are made to duplicate 6500k... so its definitely yellow.

Link to comment
Share on other sites

Hi Bros...

sorry no reply from me... Been very buzy nowadays...

I guessed you guys are right. I Think it has been the lightings issue.

Did the water test, water seemed to be ok. Clear.

Anyway, thanks alot for the guys contributing the suggestions/answers to my problem here. Thanks...

Anyway, this is my tank, looks clear in pic but yellow in rel life....

God... I need to change my lightings soon....

post-6-1160692716.jpg

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share



×
×
  • Create New...