Jump to content

Seio 1500 or Tunze 6100 x 2 + controller ?

VanDeam

By VanDeam,
in General Reefkeeping_

 Share

Recommended Posts

  • SRC Member
VanDeam Newbie

VanDeam

Posted
  • SRC Member
Posted

Any input ? currently using a 820 for 3ft tank got alittle dead spot problem

have a seio 1500 and a tunze 6100 x 2 sitting in storeroom .. is it too strong for my tank ?

6x2x2.5 FOWLR

Skimmer - Recirculating Custom Beckett Fr - Skimz Fr Return - OR6500/1262 Wavemaker - Tunze 6060 x 2 Light - 2x5ft FL Blue+White

Chiller - CL650

4x4x2 SPS

Skimmer - DeltecAP851 Fr - Skimz FR Return - OR6500 Wavemaker - 2xTunze wavebox +Ts24 Light - 3x250w MH + 8 ATi t5

CR - Deltec pF601s Chiller - Arctica Titanium Commercial Chiller

3.5x2x2 REEF

Skimmer - HnS150-2001 Fr - Skimz Fr Wavemaker - Tunze Ts 24 Return - 1262 Lights - Solite 2x150W MH + 4 Ati T5 CR - Skimz CR NR - Nr1000 Chiller - Arctica Titanium 1/5

Link to comment
Share on other sites
jervismun Newbie

jervismun

Posted
Posted

6100 will not be too strong if you have Multicontroller 7095 :)

Tank 60x40x40 Optiwhite Glass Tank Sump Elos 500 w/ Tunze Overflow Protein Skimmer Skimz Kone SK1 Return Pump Hydor Seltz L30 Wavemaker Hydor K1 Illumination 150W + 2 T5 Chiller Arctica 1/5hp w/ Aquabee 1000 Water Top-up Tunze Osmolator Dosing Pumps Grotech 3-Channels Calcium Reactor Deltec PF 501 Computer Aquatronica

Link to comment
Share on other sites
  • SRC Member
VanDeam Newbie

VanDeam

Posted
  • Author
  • SRC Member
Posted

sure ?!?! set to wat ? coz i am not sure set to wat mode ?

can i run x 2 head or just 1 ?

6x2x2.5 FOWLR

Skimmer - Recirculating Custom Beckett Fr - Skimz Fr Return - OR6500/1262 Wavemaker - Tunze 6060 x 2 Light - 2x5ft FL Blue+White

Chiller - CL650

4x4x2 SPS

Skimmer - DeltecAP851 Fr - Skimz FR Return - OR6500 Wavemaker - 2xTunze wavebox +Ts24 Light - 3x250w MH + 8 ATi t5

CR - Deltec pF601s Chiller - Arctica Titanium Commercial Chiller

3.5x2x2 REEF

Skimmer - HnS150-2001 Fr - Skimz Fr Wavemaker - Tunze Ts 24 Return - 1262 Lights - Solite 2x150W MH + 4 Ati T5 CR - Skimz CR NR - Nr1000 Chiller - Arctica Titanium 1/5

Link to comment
Share on other sites
jervismun Newbie

jervismun

Posted
Posted

Sorry bro... didn't know your tank is only 1.5ft depth... well probably too strong unless you only use it at left-right alternate (one off one on) at 30%. Even then... you will find the current strong... face is diagonally from the back to the center of the front glass.

Tank 60x40x40 Optiwhite Glass Tank Sump Elos 500 w/ Tunze Overflow Protein Skimmer Skimz Kone SK1 Return Pump Hydor Seltz L30 Wavemaker Hydor K1 Illumination 150W + 2 T5 Chiller Arctica 1/5hp w/ Aquabee 1000 Water Top-up Tunze Osmolator Dosing Pumps Grotech 3-Channels Calcium Reactor Deltec PF 501 Computer Aquatronica

Link to comment
Share on other sites
  • SRC Member
Dazza Newbie

Dazza

Posted
  • SRC Member
Posted

yo Kenny... as i told u lah even for my 3 by 3 by 2.5 , i only use 30% - 80 % on one stream n then 30% - 60 % the other & its still pretty strong ... u hv to use a lot of imagination to deflect the wave against glass wall n then rocks n then against the other current ... but the fishes love it ... but u dont need to buy another wavemaker even if u upgrade to a 5 or 6 ft next time

Main Tank : 48 inch by 36 inch by 28 inch (2 sides starphire glass)
Sump Tank :
Return Pump :
Chiller : Starmax Compressor 1 HP Drop coil
Chiller Return Pump
Protein Skimmer :
Wave Maker :
Fluidised Reactor :

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


×
×
  • Create New...