anyone have acrylic cutter to cut small circles..?

[somebody]

[Morpheous]

Why dun use a hole saw?? Most ppl would have a electric drill

Plus the cut is nicer

[somebody]

an electric drill with a hole saw bit??? is that how theymakea hole in acrylic?!?!

hehe.. pardon my ignorance....

[chrisyew]

How big is the hole you wish to make?

[somebody]

enough for a pvc tube. 3/4inch to go in.

[chrisyew]

enough for a pvc tube. 3/4inch to go in.

That's about 19mm. Not too big and all you need is a drill bit from small to medium size. Do not straight away drill a big hole as it may crack the acrylic. After that, you may use a stone grinder attached to the drill to enlarge the hole to the correct size.

The stone grinder is those cone shape one;

[somebody]

kewl.. thanks!

[chrisyew]

kewl.. thanks!

Forgotten to tell you something important. When buying drill bits, tell the hardware man that you need it for drilling plastic. The drill bit for various material is different, thus if you buy the wrong one, it may also crack the acrylic.

[somebody]

anyone who lives near kembangan has one? i need to borrow for a little while =)