daimy068's 4x2.5x2.25'

[daimy068]

Yup. Planning to go sps. What will you be going for?

Your tank will be HUGE! What thickness glass you gonna use? Definitely has to be more than 12mm. How abt the equipment?

[dsam]

Yo Mark,

2 ft more than you oni wat. I'll be probably into mix reef. Currently having 3ft x 1.5ft x 2 ft (H) with I-Aqua overflow box and Macro Skimmer.

Once everything is comfirmed and will start to proceed the project. Tank thickness of 12mm will be sufficient. Current tank will convert to Fish Only Tank ###### quarantine tank.

Marine Equipments to be used for Marine Tank 2 Project :

1.) 6ft x 2ft x 2.25ft Main Tank

2.) 3.5ft x 20" x 20" Sump

3.) Return Pump, OR6500 or Sequence Reeflo Dart

4.) 2 X 150W MH, 1 X 250W MH & 2 X 80W Actinic

5.) 1/3 HP Daeil Chiller (existing)

6.) Tunze 6060 X 2

7.) Tunze WaveBox (considering)

8.) RM Dual Beckett

9.) RM W.C

10.) RM Kalkwasser Reactor

11.) ML FR (existing)

12.) ML D/I filter

13.) Resun MD55 for beckett

Above are the tentative equipments to be purchased/use for the 6 footer project. Pls do recommend other products which you think is even better or I have missed out.

Will be looking for Joe P to start fabrication for the customised dual beckett.

Bro, how long have you been running your tank system? No probs with the darts?

David

[weisoon]

dsam

make sure you plan your overflow properly if you want to use wavebox. Better to span the overflow the whole length of the tank's back if you can spare the space. So make tank 2.5 ft and use the 0.5 ft as the overflow. cheers

[Fuzz]

Great Looking Tank & setup...

more Pix more Pix more Pix!!!

[dsam]

dsam

make sure you plan your overflow properly if you want to use wavebox.  Better to span the overflow the whole length of the tank's back if you can spare the space.  So make tank 2.5 ft and use the 0.5 ft as the overflow.  cheers

Thank you Weisoon,

I have in fact already a 6 ft cabinet in my house nw. Tat was previously for fresh water tank, now no choice but to go for 2ft width for the main tank. If not, will definitely go for 2.5ft width.

I intend to have the overflow system to run across 2ft x 6". Wat do you tink? Guess, the wavebox should be able to place at any corner.

Weisoon, is the wavebox really tat good? Or a few 6060 are just as good liao? Me will not go into SPS so soon, at most oni a few. I want to concentrade on the LPS first.

Really appreciate your advise.

[weisoon]

If you span the overflow at 2ft x 6 inches, i.e. the overflow at the left or right end, if you adjust the wavebox too high amplitude, then the overflow box may run dry, i.e. no water flowing into box for a very short period of time. You may run into flushing noise if running durso. Frankly I have not run this way before on a wavebox, maybe some reefers here who have used the wavebox can contribute.

If going LPS, then may not need wavebox. Some Tunze on controller is good enough. For SPS, the better way is use a rotatable tunze coupled with wave making is best for random water movement.

Gilbert's tank maker is quite good. Remeber to ask him to make Aquatechnic style for the silicone bonding. I know because I used the same tank maker.

[dsam]

Wa, luckily I asked you. If not, oso nvr tot of it. Looks like I can invest on something else liao.

You mean your tank oso made by Gilbert. err...Bro, you have any tank pics of yours for me to see? Ran thru this whole section, couldn't see your sample. Only 'Weishun', is that you? I tink not. Or probably you did not post any.

Anyway, great to know you and Mark. Thanx for the advise!

p/s: sorry mark for hijacking your thread, if not the expert specialist will not come out.

[Clownfish Lover]

Bro,

Very nice set-up u have there. Must have spent a bomb yea? Cheers.

[weisoon]

Wa, luckily I asked you. If not, oso nvr tot of it. Looks like I can invest on something else liao.

You mean your tank oso made by Gilbert. err...Bro, you have any tank pics of yours for me to see? Ran thru this whole section, couldn't see your sample. Only 'Weishun', is that you? I tink not. Or probably you did not post any.

Anyway, great to know you and Mark. Thanx for the advise!

p/s: sorry mark for hijacking your thread, if not the expert specialist will not come out.

dsam

Actually Gilbert does not make tank, just his tank maker. I also went through Gilbert but end up working with the tank maker direct for my tank.

Did not post anything in Members Tanks & Specs as my setup not good enough. Moreover, my tank setting up is taking a very long time....since last year April, ask Mark and he can vouch.

So as not to disturb Mark's thread, if you need anything, just PM me. Cheers.

[daimy068]

Wah lao! Weisoon, what do you mean your tank not good enough? I was totally impressed by your tank when I 1st saw it...still am now!

Just waiting for your sleeping dragon to be unleashed!

dsam, take up his offer of advising you! No way you can go wrong...always very sound advice.

[daimy068]

Bro,

Very nice set-up u have there. Must have spent a bomb yea? Cheers.

Thanks bro. Still sending more...

[weisoon]

Mark

Hope everything is going smooth for your setup.

[dsam]

Wah lao! Weisoon, what do you mean your tank not good enough? I was totally impressed by your tank when I 1st saw it...still am now!

Just waiting for your sleeping dragon to be unleashed!

dsam, take up his offer of advising you! No way you can go wrong...always very sound advice.

Oh yes, a humble sleeping dragon. Will have to wait patiencely for the master piece to emerge.

[daimy068]

Mark

Hope everything is going smooth for your setup.

Thanks weisoon.

Just did a test run. Everything seems good. Flow from the pump that's direct to tank is strong. Flow from the other pump seems abt right...stronger than it previously was.

[daimy068]

Hi all. Had the time to work on 2 things over the weekend.

Constructed a stand for my FR which will bridge over the 2 Sequence DARTs. Also added 2 colling fans on the stand for the DARTs.

1st pic: how it'll all be mounted.

[daimy068]

Another view from the top.

[daimy068]

The holes drilled out. Phew! Saw-dust everywhere!

[daimy068]

Completed and installed in the cabinet. Used black wood-grained laminating paper all over the stand to go together with the rest of the cabinet.

[daimy068]

View of the whole cabinet. Wires wires everywhere.

Gotta take time to route them nicely.

[daimy068]

Next up! Had a water top-up reservoir made.

[daimy068]

A little 8mm hole drilled on the reservoir for the dosing pump to draw water from.

[daimy068]

Hole drilled into the wall of the cabinet for the dosing pump inlet.

[daimy068]

From the inside of the cabinet.

[daimy068]

The reservoir located outside the cabinet. Will have the carpenter make a box with a door to cover it.

[daimy068]

Turbulence created with only return pump1 running (direct to tank).