Need advice on Korallin CR

[Chris]

Just bought a Korallin CR-3001 from a fellow reefer but he has lost the manual. Need some advice on how to set up the thingy. I.E. which tube goes where? As for tuning, if got advice also good.

Thanks

[minsmarine]

E***** is inlet

A***** is outlet.

Suggest, use feed pump to drive ,otherwise it's useless

[Chris]

Thanks mins....got that figured out already. Not using a feed pump but using gravity. In from main tank, out to sump.

Now setting 1 bubble per 4 seconds and effluent of 1 drop per sec. Noted my Kh and Ca reading and will check back in few days to see if this setting will hold the Kh and Ca. If not then adjust upwards. If Kh and Ca shoot up then adjust down wards. This way can right.

[minsmarine]

Setting is all depend on your tank requirement.

For your info,

for my 3x1.5x1.5 Full Flag SPS tank,

1 bubble per 2 Second , Effluent 40ml per min ( should always measure in ml than drop , cause how big is drop ).

CR should be giving result in 1 hr time, u don't need to wait for a few day.

Here is good reading RC's CR

[hamannbmw]

i thought it wil take some time b4 it starts working.... 1 hour job

[reefer guy]

i thought it wil take some time b4 it starts working.... 1 hour job

possible bro..... dump a bucket of calcium then after 1 hour measure your kh/alkalinity then starting buffing again

chris, i have the same model of ca reactor, let me know if u need, can fax to u if u want

[minsmarine]

i thought it wil take some time b4 it starts working.... 1 hour job

it's what I was told @ RC and it's true enough. My CR will breakin in 1 hour and it'll maintain kh.

[sunny03]

guys just want to know does your CR chamber turns warm ?? is it the chemical reaction ??

[lightningstrike]

guys just want to know does your CR chamber turns warm ?? is it the chemical reaction ??

yes, the CR feels warm and the recirculation pump contributes a noticeable amt of heat to it.