Jam Free zeovit reactor....

[alanseah]

Hi,

I manage to get the latest design from my local DIY (http://www.iaquatic.com/)

And I proud and happy to say finally a new zeovit reactor design that you will never have a hard time shaking it or plumping it....

It's stuck free....

[alanseah]

All the reactor that i have use before give me a hard time whenever I want to pump my zeolite. Cause I will always face the problem of plumping half way and I got stuck by the rock and I have such a hard time trying to unlose the rock and allow me to continue plumping.

The always get stuck issue has make me lose interest in plumping the rock and time and time I almost want to give up due to the plumping and get stuck issue.

With Ian new stuck free zeovit reactor, it totally solve everyone issue and not to mention the workmanship is great...

Every part of the reactor can be unscrew and remove for maintenance.

What so exciting, with this new reactor swing and plumping the zeolite is not longer a headache.

The reactor can be fix either in-sump or out-sump. And it can hold up to Max 2litre of zeolite.

But I personal feel that best to fill up max 1.5litre of zeolite as there will be more space allowance for the rock to fly about and thus able to shake them well.

[alanseah]

Look at how easily I can pull it out....

[alanseah]

The internal cylinder with top cover to prevent the rock from flying out...

[alanseah]

Look at how it's like when the internal cylinder go into the whole reactor..

[alanseah]

The top T-pipe which can also be unscrew for removing the whole internal cylinder..

[giantbicycle]

cool

[andysho]

cool can pm the price thanks

[alanseah]

cool can pm the price thanks

sorry for the price it will be better you ask from Ian cause I do not know the actual price of it... I'm just helping to do a review of it only...

[typrobin]

hhhmmm...i thought Ian's reactor suppose to be spun instead of plumb??

not too sure myself...saw it in the website...and always thought that the user suppose to spin the reactor...

[mUAr_cHEe]

show the spinning or the pumping in action manz.....

just like a well lubed... er.... never mind...

[riot]

Sweet design. Looks like it will make changing the zeolites easy too.

[Ian]

hhhmmm...i thought Ian's reactor suppose to be spun instead of plumb??

not too sure myself...saw it in the website...and always thought that the user suppose to spin the reactor...

You can do both spin and plunge, bro.

[Reefaholic]

Will it leak if place on out sump application? i wonder the water might sip through the pumping bar. What about those small rocks slipping through those holes inside the chamber since without using cotton sponge like other reactor?

Just some questions before placing orders.

[alanseah]

Will it leak if place on out sump application? i wonder the water might sip through the pumping bar. What about those small rocks slipping through those holes inside the chamber since without using cotton sponge like other reactor?

Just some questions before placing orders.

well yes, they will be a little bit of leak from the pulling bar when u shaking the rock.. but it's a horriable leak that will have your floor every where cover with water..

just put a small cloth on the top cover when u shake and that's it simple and easy...

small rocks slipping through those holes inside the chamber but that is not as issue and it wont cause the whole reactor to jam or have too much small rock slip throught...

even you use those cotton, think about it.. what will these cotton become in the long time.. all the dirty trap in the cotton and become niratory factory... wont that be even worst..

[alanseah]

ok I have attach the video clip of spining the reactor...

sorry for the lousy video shot as it's more like a last minute job..

Video_006_.zip