Jump to content

2nd Review Of Weipro Skimmer 2012


tivoli
 Share

Recommended Posts

Hi folks, I read BWilly's review of Weipro.

So I would like to add in my own photo shot as well.

I posted these pics before all the dat went down 2 months ago.

I find WeiPro quite a good skimmer. I could tune to produce lots

of foams. See the pics for more info cos a pic say a thousand words.

I find that lots of people were disputing the Weipro citing the size of the

bubbles. Deng Xiao Ping use to say : "Don't care black cat or white cat as well

it catches rats it will be a good cat."

In our context, :"Don't care what brand or price or size of bubbles : as long as the skimmer produce foam it is a good skimmer"

Judge yourself from looking at the pics.

Link to comment
Share on other sites

  • Replies 130
  • Created
  • Last Reply

Top Posters In This Topic

As you can see,

I use the same skimmer as bwilly but the foam produced is different.

This is due to the fact that we tune the skimmer differently.

I tune the water level to be quite high.

The following pic shows the water column and the size of

bubbles if you can see them.

post-14-1062818949.jpg

Link to comment
Share on other sites

  • SRC Member
Hi sharkbait,

I don't thank the type of pump matters

cos the water level is controlled by a water level

valve that you can adjust.

Anyway I am using a cheap taiwan-made 2500l/hr dolphin.

Cheers

but my friend is using a pump rated 1500l/h and it doesnt produce half as much bubbles as yours.

Link to comment
Share on other sites

Hi sharkbait,

its prob due to the water level tuning.

Plus I think I prefer to oversize the pump.

The specs on the skimmer states that 1500l/hr pump is required.

But then when you put in the pump, factors like height of water column,

wear and tear etc may reduce the pressure, so better to use a bigger pump.

Cheers

Link to comment
Share on other sites

Bro,

We adjust foam up to which level on the skimmer.

Maybe you like to show us a pic of the water level

in the skimmer.

Regards n Thanks

6.5 * 2 * 2 + 3.75 * 1.5 *1.5,(Decomn on 14/9/08)
4*2*2 + 2.5*1.25*1.25 (Decomn on 1/8/09)
5*2*2 (Fully LED light system, 140 3 watt SSC leds with 60 degree lens)(Decomm)
2.5*2*2(Fully LED Light System,96 3 watt SSC leds with 60 degree lens)(Decomm)

5*2.5*2(LED only)

Eheim return 1 * pump

1 HP Daikin compressor with cooling coil
2 Jebao OW40, 1 ecotech MP40,
1X6085 Tunze wm,

1 CURVE 7 Skimmer

  1 DIY 80 led control by Bluefish mini 

1 radion XR30W G2, 2 Radion XR15G3

Sump area lite by 5 ft T5 , 6 * SSC 3 watt red LED for refugium

1 Full spectrum E27 led light

1 CR control by bubble count

Start No Water Change since 1st Dec 2016

Add new 2.5x2x 1.5 ft 

 nLekOfpYts.jpg
[/quote]


 

Link to comment
Share on other sites

good to see another SRC mbr using weipro to gd effect.

Base on my experience on tuning skimmer, I try to

adjust the bubble (when just starting to break in)

Its not too high n not too low.

the bubbles will slowly build on top of each other,

bringing the organic waste to the funnel top.

If u overskim u may get light brown residue.

Its best - be patience, and let the bubbles

slowly build up.

Also its always go to get a slightly over-rated

pump. (actually anything if price different

is not much)

post-14-1062859956.jpg

Link to comment
Share on other sites

Can Weipro be used without being hung on? I'm thinking of getting one and putting it below my tank. As I don't have a sump I'm thinking of using an external pump to pump water out of the tank and into the skimmer..and back into the tank via tubing.

Does this sound ok?

Always something more important than fish.

http://reefbuilders.com/2012/03/08/sps-pico-reef/

Link to comment
Share on other sites

Yes friend,

I am seow from Pasir Ris.

Ever since my data was erased from the previous crash, decided

to adopt a better *name* rather hokkien version of *crazy reefer*.

I previously named myself siow_reefer after my wife caught me

sneaking out of bed late at night to shine torchlight at my tank.... :)

Link to comment
Share on other sites

  • SRC Member
Hi folks, I read BWilly's review of Weipro.

So I would like to add in my own photo shot as well.

I posted these pics before all the dat went down 2 months ago.

I find WeiPro quite a good skimmer. I could tune to produce lots

of foams. See the pics for more info cos a pic say a thousand words.

I find that lots of people were disputing the Weipro citing the size of the

bubbles. Deng Xiao Ping use to say : "Don't care black cat or white cat as well

it catches rats it will be a good cat."

In our context, :"Don't care what brand or price or size of bubbles : as long as the skimmer produce foam it is a good skimmer"

Judge yourself from looking at the pics.

Hi,

I would agree judging from the skimmate that the weipro produced is indeed an excellent skimmer for its price compared to higher priced skimmers(around $100) such as macro and prizm. :D

However I would not agree that irregardless of bubble size, as long as produce foam is a good skimmer. B)

Sorry I don't mean to denounce weipro or anything. But I feel there is a need to show the difference between why we should be paying so much more for a so called branded skimmer such as a H&S, EuroReef, AquaC etc. :angel:

Yes these are much much more expensive but the ones who use these skimmers are not fools either. So there must be a reason (other than having $$$ to spare), why reefers would prefer to go for so called branded skimmers. :pinch:

Bubble size and quantity is extremely important and has direct impact on the quality of skimmate. Using an under rated or over rated pump can reduce efficiency too. An under rated pump will not enable enough tank water to flow through the bubbles, hence low cleaning rate. An over rated pump will not allow long enough bubble/water contact time and hence reduce cleaning efficiency too.

That is why you see those powerful skimmers using extremely long tubes. The reason being it has a longer contact time with the bubbles.

However, to add on, as a budget skimmer, the weipro is indeed one of the best <$200 skimmers around I've seen. :peace:

But as far as possible, I strongly recommend you go for the AquaC, H&S, schuran or Euroreef for tanks 3 ft and above. Don't stinge on skimmer because this is your livestocks only life line. Save up and get the best skimmer you can absolutely afford for your tank. ;)

Here is a photo of skimmate produced by a H&S using a 18W pump only.

post-14-1063012300.jpg

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share




  • Join us on the largest Reefing community in Asia!

    Sign up and share your reefing journey with us, make friends and get helps from the community .

     

  • Topics

  • Latest Update

    1. 0

      加拿大保录取_SFU毕业证成绩单——Q微信751558146西蒙菲莎大学学位证_成绩单_办理SFU文凭学历认证Simon Fraser University

    2. 0

      美国学位证_Brandeis毕业证成绩单+Q微信751558146布兰迪斯大学学位证_成绩单_办理Brandeis文凭学历认证Brandeis University

    3. 0

      加拿大保录取_UBC毕业证成绩单——Q微信751558146英属哥伦比亚大学学位证_成绩单_办理UBC文凭学历认证University of British Columbia

    4. 0

      美国学位证_PSU毕业证成绩单+Q微信751558146宾州州立大学学位证_成绩单_办理PSU文凭学历认证Penn State University Park

×
×
  • Create New...