Need help to set up Tunze multi controller

[riot]

Hi all,

need help here. I have two 6000s so do i plug both into the slots for channel 1, or into Channel 1 & channel 2?

Also, I want to run a function where left pump pulse max, the right pump pulse low, then vice versa in say 5 min intervals. How do I run that?

Whats with the interval switch and the mode switch on the right edge of the casing? If I pulse do I still need the intervals? What do the modes mean? I assume the bottom mode is tidal- one pump is OFF while the other runs and pulse. The others neh?

btw thanx alfa- your multi rocks!

Hoping to hear from someone soon.

Cheers

[weileong]

Do this and it'll be what you want.

Plug pump 1 into Slot A and pump 2 into Slot C.

Slot A and B is channel 1 and slot C and D are on channel 2. (From Left to Right).

Set channel A top knob to 30% and bottom knob to 100%

Set channel B top knob to 100% and bottom knob to 30%

Set the pulse knob to max clockwise (the actual duration I cannot remember)

Set mode selector to center (if i remember correctly as that is for pulse operation)

Interval selector is used only when you have at least 3 tunze plug in.

mode selector:

top is tidal mode.

middle pulse mode.

bottom sequential

[weileong]

Bro Riot,

You can refer to this thread where I posted part of the Tunze manual.

http://www.sgreefclub.com/forum/index.php?...=0entry339700

[riot]

Yikes- I set both channels to 100% max then 30% low- no wonder no alternating!

But really, WL: