Microcomputer Timer - LCD (industrial grade)

[dt8666]

Reefer, currently at overseas and found this timer at reasonable price. I can only get limitted unit due to space. If you want it (must be 100%), drop me a PM with the following details: I also state the consition of sales below:

- Your contact so I can SMS my account detail to you for deposit

- Your name

- Qty needed

- Your must be willing to transfer deposit of $10 to my account (POSB/DBS)

- I can only carry maximum of 10 units, so no more than that and I will decided based on 1st come 1st serve and my decision is final.

- I will not provide warranty although I will try my best to ensure it does function as I also get it for myself!!

Product spec and picture as below:

- It is NEW, Price: S$28

- Model: KG316T

- 220V/50Hz

- Switch spec: Max 6000W

- 8 set of on/off timer setting (I will try to get 10 on/off at the same price)

- Instruction are in Chinese only, should be very easy even if you don't read Chinese

- LCD screen

- Size: 120 x 74 x 58mm

- Weight: 430g

- You can program each on/off to be either everyday or every weekday/weedend or mon to wed or etc...

- This is not a normal digital timer you get from electrical shop, so don't compare.

OK, that is it. Collection will be at Tampines ST72, I will be back on Wednesday night and collection can start then.

Order stop at Sunday night.

Cheers!

[dt8666]

Picture showing the printed spec. Sorry for the blurrr pic.

[dt8666]

OK, response to some question. This is a SINGLE Channel Timer, this means, you can only control one device but with the flexibility of different way (8 way to on and 8 ways to off in this case).

Example is you can control the same device to on/off at diff timing at weekend vs weekday etc.

Hope this is clear.

[bloodlamb]

hi,

Is this for direct plugin into 3 pin plug or we wire up terminal?

What does it uses to turn on/off the circuit? I'm getting sick of those timers that keep getting stuck for my MH (tired 4 already 1 cheapo one, 2xthe ben and 1 taiyo electronic one) which is only 2x150w.

BTW whats the temperature rating also.

Thanks.

[dt8666]

It has two connector to wire to a AC Plug. The output can be direct to device or you can couple with an AC relay, it is all upto you.

Operating temp as in the second picture: -25 to 60 C.

I don't suggest you have this inside your MH housing, if you want to do that, you may need high temperature grade devices which normally not cheap. However, if you want to mount/attach it next to MH housing, it will all depand on your housing design. Just measure the Temp at the place you would like to put the device, as long as it go below 60 C, you should be save, else good luck!

BTW, the ben also may not work if you get the normal home version.

[dt8666]

Any more needed, can take 5 more order thats all.

[dt8666]

Good news, the timer will have 10 on/off setting instead of 8 and still at the same price.

BTW, if any of you still want it, I may be able to get it tomorrow but no promise due to work schedule.