Jump to content

Problem with Weipro 2012


jackalcleo
 Share

Recommended Posts

Have try 2 different pump on this skimmer and keep getting green watery skimate. Is this normal???? The model rated pump rate is 400G/hr or 1500L/hr. 1st pump is atman 104 (1800 l/hr) & 2nd pump is DYMAX PH2500 (2500l/hr) results is green watery skimate.

Can any bros advice me at least to get the skimate not watery type? Have adjusted the water level from the recommended wavy line till 1 inch below the collection cup.

Link to comment
Share on other sites

  • SRC Member

im using weipro 2012 too but on AT-104 (2000l/hr) on my 2-feet (57L) tank.

tuned the water level to 0.25~0.5 inch below the collection cup. skimate is dark brown watery type and get thick dark brown mud round the collection cup opening after 3 days of operation after cleaned the cup.

if u want to get watery skimate which means more nutrients is removed (IMO better). tune the water level higher like mine or less than 0.5 inch.

green skimate? i dunno much on that. but i heard if a coral is coloured, the skimate is normally having the coloue of the coloured corals. so do u have a green colour coral in ur tank?

if so, the coral might be the problem.

or do u have lightings very near ur skimmer? if so, it might be algae growing on it too.

cheers bro, i will try to help u as much as i can.

regards,

LaW

If a man could beat his own fantasy. Then to only breed in captivity. Then its pointless.

Genesis 1:20

And God said, Let the waters bring forth abundantly the moving creature that has life, and fowl that may fly above the earth in the open firmament of heaven. And God created great whales, and every living creature that moves, which the waters brought forth abundantly, after their kind, and every winged fowl after his kind: and God saw that it was good. And God blessed them, saying, Be fruitful, and multiply, and fill the waters in the seas, and let fowl multiply in the earth. And the evening and the morning were the fifth day.

|| Tank: 78" x 30" x 30" || Sump: 48" x 22" x 20" || Lights: PowerModule 10 X 80W|| Returns: 2 x HF32 ||

|| Skimmer: BubbleKing Supermarin 300 || Wavemaker: 3 x 6100 & 1 x 6200, 2 x Wavebox 6212, WavySea ||

|| FR: 2 x FR150 || NR: Sulphur Denitrator || CR: RM Custom Made 8" || KR: Deltec KM500 || TopUp: Tunze Osmolator 3155 ||

|| UV: Coralife 12X 36W || Ozonizer: Sanders C200|| Controller: GHL Profilux Plus II Ex ||

Link to comment
Share on other sites

  • SRC Member

Hi Jakalcleo,

I am also using sa2012 and I do get the green watery skimmate too. The green is due to me feeding Aquapharm 5in1 coral food. I am using a 2900 l/h pump to drive it.

I have a feeling that it is normal for this skimmer to hace watery skimmate. For the water level, I adjust to just about 1.5 inches above the water mark on the skimmer for easier cleaning.

BTW, this is a low end product for newbies like me so I guess justy make do with it I think.

Link to comment
Share on other sites

  • SRC Member

if u dun wish to get watery skimate.

tune the water level further off from the collection cup.

regards,

LaW

If a man could beat his own fantasy. Then to only breed in captivity. Then its pointless.

Genesis 1:20

And God said, Let the waters bring forth abundantly the moving creature that has life, and fowl that may fly above the earth in the open firmament of heaven. And God created great whales, and every living creature that moves, which the waters brought forth abundantly, after their kind, and every winged fowl after his kind: and God saw that it was good. And God blessed them, saying, Be fruitful, and multiply, and fill the waters in the seas, and let fowl multiply in the earth. And the evening and the morning were the fifth day.

|| Tank: 78" x 30" x 30" || Sump: 48" x 22" x 20" || Lights: PowerModule 10 X 80W|| Returns: 2 x HF32 ||

|| Skimmer: BubbleKing Supermarin 300 || Wavemaker: 3 x 6100 & 1 x 6200, 2 x Wavebox 6212, WavySea ||

|| FR: 2 x FR150 || NR: Sulphur Denitrator || CR: RM Custom Made 8" || KR: Deltec KM500 || TopUp: Tunze Osmolator 3155 ||

|| UV: Coralife 12X 36W || Ozonizer: Sanders C200|| Controller: GHL Profilux Plus II Ex ||

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share



×
×
  • Create New...