Jump to content

Temp for SPS Tank


  

473 members have voted

  1. 1. Temp for SPS Tank

    • 24C And Below
      8
    • 25-26C
      112
    • 27-28C
      104
    • 29-30C
      11
    • 31C Above
      4


Recommended Posts

  • 1 year later...
  • Replies 107
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

  • 2 weeks later...

30-30.5 degrees celcius is still tolerable by SPS. Lethal temperature for SPS seems to be 30.5-31 degree celcius, where you can notice STN.

+1..........me set my temp at 26.5-27.5 consistently.

IMHE...In 2 ocassion, firstly my chiller pump mulfunction and brought temp to 31.5 deg and suffered 3 collonies STNed. Second forget to on back chiller after maintenance and temp raise to 30+ deg. without any sps casualty.

Mix reef-Main tank 3x2.5x2.5ftA

TI 3ft 8tube

Hitachi compressor unit 1HP

1 x AP- 702 Deltec

1 x Coral Lab CR with Ph controller; 1X AquaMedic Kalk Reactor top off

Baby fish dosing kh/Sr&Kcl/mg

DI water thru kalkwasser

1 x Skimz Fr with BRS gfo

2 x Rio 32hF main pump

1 x Pinpt Orp monitor

1 X Pinpt Ph monitor

Aquamedic wave maker

Sump 3x1.5ft plumbed together with;

1.5ft cube live rock

Frag tank 5x1x1ft

 

Link to comment
Share on other sites

The followings points are taken from Reef Central:

SPS metabolic rates rise as temperature rises. They may consequently use more oxygen, carbon dioxide, nutrients, calcium and alkalinity at higher temperatures. This higher metabolic rate can also increase both their growth rate and waste production at higher temperatures.

Another important impact of temperature is on the chemical aspects of the aquarium. The solubility of dissolved gases such as oxygen and carbon dioxide, for example, changes with temperature. Oxygen, in particular, can be a concern because it is less soluble at higher temperature.

From my experience:

I originally set my temperature range at 26 - 28 and my ORP reading was 317

When I adjusted my temperature range at 25 - 27 and my ORP reading has improved to 400

fts-022012.JPG

Link to comment
Share on other sites

  • SRC Member

I'm setting my tank temperature to be 28degC with SPS....

Of course not those high end SPS....

Keeping those more hardy like birdnest, monti, etc..

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share




×
×
  • Create New...