What flowrate to use with resun fluridized reactor

[KyRo]

Hi

ive been using the resun FBF-1000 and i its recommended flowrate is 500-600L/hr. i use a small atman pump rated 500L (cant remember model) the pump flowrate is so slow that it seems like a small trickle (like it cant overcome the pressure of pumping up and through all the rowaphos). jus wondering what flowrate pump any1 else who has this model is using it with.

Help any1??

[giantbicycle]

no need a poweful pump for this....If too powerful pump and u mean going through all your ROWaphos, your tank will become Rowa storm....and it is not sightful... so, if you see the Rowa is dancing...And water is able to come out through the outlet, Its enough already....

[LIM CHYE HUAT]

Hi

ive been using the resun FBF-1000 and i its recommended flowrate is 500-600L/hr. i use a small atman pump rated 500L (cant remember model) the pump flowrate is so slow that it seems like a small trickle (like it cant overcome the pressure of pumping up and through all the rowaphos). jus wondering what flowrate pump any1 else who has this model is using it with.

Help any1??

bro ,how much is your resun fbf -1000 and where you get it ? for what size tank ? mine is 100gallon.

[Nautical]

i believe there is a blockage caused by the rowas at the mouth of the inlet tube at the bottom of the fluidized reactor.

go here to read up:

http://www.sgreefclub.com/forum/index.php?...pic=21372&st=15