Resun FR1000

[amteo]

I intend to use this FR with RowaPhos. Anyone can advice what flow rate/pump to use?

Thanks

[lightningstrike]

gauge thru the clear plastic. can see a little tinge of rowa in dancing motion can liaoz. 2 high a flowrate will cause grinding.

[Tigger]

use 300l/h to 600/h pump will do

[amteo]

use 300l/h to 600/h pump will do

Current set-up consists of a Atman pump (can't remember the model) as a return from the sump to the tank and an Eheim Compact 600 for the chiller (Teco Micro). The Eheim returns to the sump.

With the FR, I've got a couple of choices.

1) Using a Sicce IDRA to feed the FR and my chiller and then return to the tank. Can remove the Atman and depend on the IDRA alone?

2) Using a Eheim Compact 600 to Drive the FR and my chiller and then return to the tank. Will likely have to use the Atman to supplement the flow.

Any other possibilities?

[lightningstrike]

depending on how big is ur tank, how much ur overflow can handle, preference of strong flow in ur main tank, teeing off from ur return can be an option worth considering.

as for using the pump to drive both chiller and FR oso can but again u gotta c what flowrate is best recommended for ur chiller.