cutting down on salt spray

[FuEl]

I have recently got my tank running. I have an internal overflow box with a hole drilled at the back of the box (not below the tank). Have already done my piping to my sump . Anyone with suggestions how I can cut down on the salt spray entering my sump besides tying a cloth around the pipe? I have thought of doing a dorso in my overflow box but space is really limited. Anything that I can do to my piping in my sump to minimise salt spray? The piping is currently submerged in the water.

[iewnehz]

can see the pic properly?does this works?

at least i dun get salt spray all over my cabinet..

[iewnehz]

here..

[typrobin]

extend the pipe loh...let it dip into the water...

[FuEl]

extend the pipe loh...let it dip into the water...

That's what I did..but bubbles still come out as my overflow draws in some air.

[typrobin]

That's what I did..but bubbles still come out as my overflow draws in some air.

hhhmmmm...

how bout letting the water splash on filters instead? it will greatly reduce the splashing effect...this is wat i did...a bit kiasu...well..i'm a singaporean...hahahaha

[Guinness]

If your pipe is ###### in water you can reduce the flow a little by putting a bioball over the pipe intake. If you have a valve there, you can also reduce the flow manually a little. Sometimes it's amazing how a small adjustment can reduce the amount bubbles.

[FuEl]

Ok..will try your suggestion. Last night I tried a sponge but it didnt help. Maybe I need a phonecard or something.