Jump to content

Coverage of a 250w DE MH...


Terryz_
 Share

Recommended Posts

  • SRC Member

I am using a 250 W DE giesemann. I am thinking of upgrading to a 3 x 3 x 2 or 2.5 cube with the same lighting set.

I think the spread depends on several factors:

1) lighting Reflector

I get this giesemann set the spread is quite standard - 2 x 2 - minimum residue lighting outside of this area

2) Aquascaping

If you have a 3 x 3 x 2 then the side panel will not have any lighting which might be a good thing as there will not be any diatoms growing on the panel. Provided your coral is situated in the centre.

3) height of lighting

As we all know the higher you go, the spread will be wide but the intensity will drop. But the standard recommendation should be at least 30 cm above the water surface.

4) Depth of tank

For 2 ft - 2.5ft depth - I think 250 can punch in ralatively easy with a 10K bulb - with standard height of 30 cm from surface.

I hope this helps :)

Link to comment
Share on other sites

But i think i will be using a DIY one... But i cannot find it ler... Hehe... Think will use the Viclite SE 250w... Unless got ppl know where to get the whole set of 250w DE... Hehe... Those who knows please pm me... Thkz...

Member of:

post-1182-0-60431600-1322062247_thumb.jp

Link to comment
Share on other sites

  • SRC Member
I am using a 250 W DE giesemann. I am thinking of upgrading to a 3 x 3 x 2 or 2.5 cube with the same lighting set.

I think the spread depends on several factors:

1) lighting Reflector

I get this giesemann set the spread is quite standard - 2 x 2 - minimum residue lighting outside of this area

2) Aquascaping

If you have a 3 x 3 x 2 then the side panel will not have any lighting which might be a good thing as there will not be any diatoms growing on the panel. Provided your coral is situated in the centre.

3) height of lighting

As we all know the higher you go, the spread will be wide but the intensity will drop. But the standard recommendation should be at least 30 cm above the water surface.

4) Depth of tank

For 2 ft - 2.5ft depth - I think 250 can punch in ralatively easy with a 10K bulb - with standard height of 30 cm from surface.

I hope this helps :)

30 cm from surface?

Mine is just about 15 - 20 cm.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share



×
×
  • Create New...