Jump to content

MY 1ST MARINE TANK - WATERBOX 20


leovin13
 Share

Recommended Posts

  • SRC Member

Hi guys,

 

I'm a newbie.

 

Got the tank, live sand, rocks (stax), light (AI Prime 16), pump, wave maker, refractometer and 7in1 test kit.

 

Will be getting the saltwater from a marine shop nearby probably this or next weekend to start the process.

 

Taking my time but hope to have it running with fish by Christmas.

 

I just have a number of questions to kick start the process.

 

Sent from Singapore Reef Club mobile app

 

 

Link to comment
Share on other sites

  • SRC Member

Please excuse my lack of knowledge. 

1. I bought both FILTER SPONGE FILTER MEDIA and BIO-FOAM. Are they the same and to be placed inside the back chamber together with the CARBON WITH NET FILTER MEDIA? 

2. During the water cycling process, do we need to turn on the light? 

3. I hear a few mentioning about adding bacteria and other stuff inside the water. Is that necessary for a nano tank?

4. What type of corals should I start with? 

5. Any other tips?

Thanks in advance, mates. 

Link to comment
Share on other sites

  • SRC Member

Welcome to reefing! 

1. Generally the media you place inside the aquarium can be classified into 3 groups.

Mechanical (filter sock, fleece, sponge etc)  to trap the solid particles in water. You need to replace them when they are dirty. 

Biological (siporax, biosphere etc) which is where you grow bacteria to break down ammonia etc. You normally should not disturb them. 

Chemical (carbon,  phosphate media etc) which adsorb soluble substances in the water. You need to replace them as they exhaust. 

The sponge and bio-foam can both act as a mechanical filter and a biological filter.  However,  they are probably not the best options around. If you use them though,  you should set them up such that water flows through the sponge first, which you will replace regularly;  then flows through the biofoam,  which you will leave it undisturbed. 

 

2. It's no harm to turn on the light.  However do note that this probably will cause algae to grow (it's a matter of time anyways). Which means you need to be ready to introduce herbivores, such as snails, to keep them in check. 

 

3. Bacteria may help to speed up the cycle process. It's not necessary though. 

 

4. I do not see any cooling solutions for your aquarium. Do you have any planned? In SG,  temperature is a big factor. 

In any case,  what corals do you fancy?  It's makes more sense to decide what you like, then make sure the aquarium can support it. 

 

5. There are a million and one tips in reefing. Some are based on facts, while some are just like old wife's tale. Keep an open mind and think for yourself, that would be a good place to start. 

 

Happy reefing! 

  • Like 1
Link to comment
Share on other sites

  • SRC Supporter

Congrats on embarking on this journey. Fun days ahead.

A couple of points :

 

Refractometer - I hope you got the optical refractometer (not the swing arm type which is inaccurate).

Since you will be using a cooling fan, there will be a lot of evaporation per day. An auto top off system is probably necessary.

For corals, what do you have in mind?

Suggestion is to start with zoanthids, Green Star Polyp (GSP) & duncans. Then proceed to other colorful LPS later on. It really depends on your system setup to be able to support it. Personally I'd avoid things like leather toadstools (release a lot of toxins in a small tank)

  • Like 1

Facebook : https://www.facebook.com/mysliceofnature/

 

 

 

 

 

Link to comment
Share on other sites

  • SRC Member
Congrats on embarking on this journey. Fun days ahead.
A couple of points :
 
Refractometer - I hope you got the optical refractometer (not the swing arm type which is inaccurate).
Since you will be using a cooling fan, there will be a lot of evaporation per day. An auto top off system is probably necessary.
For corals, what do you have in mind?
Suggestion is to start with zoanthids, Green Star Polyp (GSP) & duncans. Then proceed to other colorful LPS later on. It really depends on your system setup to be able to support it. Personally I'd avoid things like leather toadstools (release a lot of toxins in a small tank)
I got this refractometer Screenshot_20211023-201943_Amazon Shopping.jpg

Sent from Singapore Reef Club mobile app

Link to comment
Share on other sites

  • SRC Member

Got a skimmer too as advised. Using the Haqos - Nano Skimmer - PS-50.

1st chamber skimmer with bio bricks at the bottom.

2nd chamber bio black sponge at the bottom, lots of bio bricks in the middle and 3 layers of white filter sponge on top.

3rd chamber just the pump.


Sent from Singapore Reef Club mobile app







Link to comment
Share on other sites

  • SRC Member

Usually you want to have the mechanical filter (ie. Filter sponge) in the first chamber before anything else. So it can filter out most of the detritus before it runs through the rest of your system. You can have your bio bricks in first chamber, after your filter.

If you have your bio-bricks in front, then it will become clogged with detritus very fast.

Not familiar with WaterBox, but is the water level in the compartments meant to be so high in all compartments?

 

Noted that you will be using fan for cooling. So you will have significant water level drop daily, which may affect skimmer operations. Might want consider get an ATO to counter that, unless you monitor very frequently.

Link to comment
Share on other sites

  • SRC Member
1 hour ago, leovin13 said:

Just a query. My tank is near window but no direct sunlight. Would using sunshades (like the ones used for car windows) at the sides of the tank help?


Sent from Singapore Reef Club mobile app


 

If you manage to block the light, then should not have issue of excessive algae growth through sunlight. But you may have issue with temperature and water loss.

Link to comment
Share on other sites

  • SRC Member

Yes, the tank water should go through the sponge filter first, before going to any other media like your bio-bricks.

So have to move your Skimmer to 2nd chamber.

I’m not familiar with bio-bricks, but you maybe can consider placing them in a media bag (or tie them together) before putting at the bottom of the chamber. This way, easier to remove from the narrow chamber if you need to take them out for rinsing. Or if they do break into smaller pieces, you have less headache “fishing” for all the loose pieces.

Link to comment
Share on other sites

  • SRC Member

Week 2- Skimmer shifted to middle chamber as advised.

1st chamber - few bio media brick below in bag and filter sponges

2nd chamber - lots of bio media bricks in bag, black media sponge and skimmer

3rd chamber - charcoal and pump

Salinity spot on as measured via refractometer.

Almost there with Nitrite.

Perhaps cleaning crew next week.

Thanks for the advice. 20211107_020421.jpg20211107_021806.jpg20211108_110621.jpg20211108_110607.jpg

Sent from Singapore Reef Club mobile app

Link to comment
Share on other sites

  • 3 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share



  • Join us on the largest Reefing community in Asia!

    Sign up and share your reefing journey with us, make friends and get helps from the community .

     

  • Topics

  • Latest Update

    1. 0

      加拿大保录取_SFU毕业证成绩单——Q微信751558146西蒙菲莎大学学位证_成绩单_办理SFU文凭学历认证Simon Fraser University

    2. 0

      美国学位证_Brandeis毕业证成绩单+Q微信751558146布兰迪斯大学学位证_成绩单_办理Brandeis文凭学历认证Brandeis University

    3. 0

      加拿大保录取_UBC毕业证成绩单——Q微信751558146英属哥伦比亚大学学位证_成绩单_办理UBC文凭学历认证University of British Columbia

    4. 0

      美国学位证_PSU毕业证成绩单+Q微信751558146宾州州立大学学位证_成绩单_办理PSU文凭学历认证Penn State University Park

×
×
  • Create New...