Jump to content

Alex’s Wonders In A Box


alexcyf

Recommended Posts

Thanks for all the interest!

Just want to share a little more on the fish room!

Here is my 3 feet quarantine ios tank with its own circulation separated from the main display. A simple system with a dymax led light and aquarium fan (to keep the water temperature below 30)

b3bed0949460782664a5ea6b5509f6c9.jpg

The only “link” to the main tank is a drainage pipe that allows me to top up the QT tank with saltwater from the main system. In case I need to do water change and my main system is not having any issues, I can use back some waste water instead of making new water.

As you can see, the QT is already operational, with a school of Anthias and a couple of tangs serving their 2 weeks QO. Added some pvc pipe and terracotta pots to give the fishes some “security”

b3d42fb698f5264e287ea9f5b07bd9ab.jpg

Above is a closer view of my maintenance section. You can see the small basin that is installed in the crawl space. Managed to find a basin from taobao that fits the small space and serve the purpose (simple washing, water inlet and drainage).

This area is also where I house my 5 stage RODI and water drums, salt, hoses etc. The drawer under the staircase also keeps other smaller equipment in an organized fashion.

A reefer was asking if this room is air conditioned.. haha it’s not so I have a fan to keep me from sweating while doing my chores!


Sent from my iPhone using Tapatalk

Follow Alex's Reefing Journey @ 

 

 


 

Link to comment
Share on other sites

  • 3 weeks later...

Thank you all, for the kind words.

Hopefully the setup does support a healthy reef :)

Meanwhile, last weekend’s loots going through their 2 weeks QO before they go into the main display:)

6d36454d94a7405302db8e1748ce0721.jpg


Sent from my iPhone using Tapatalk

Follow Alex's Reefing Journey @ 

 

 


 

Link to comment
Share on other sites

Wah your man cave very hardcore

Thanks!

Pause from my equipment updates and a post on a current “photoshoot” of my display and man cave!

b49a9f72b304563832a879b05f27b0f9.jpg
ed5c59d9b4b2b04dbf7884f5bf29aa70.jpg
d849246d1365f8e44e19c82747a091c7.jpg
08fb3b50148d2d549e6105555be8353d.jpg
2a289b92a9ac719ed75fd513c00a4566.jpg


Sent from my iPhone using Tapatalk
  • Like 3

Follow Alex's Reefing Journey @ 

 

 


 

Link to comment
Share on other sites

  • 4 weeks later...

First top down shot of my fish room tank. Digging the trending all blue led with orange filter look, even though it’s not “real” real..

Well, quite some empty spaces yet to be filled..
bbd625ac4cf19aa274eb369d0bf0cbbd.jpg


Sent from my iPhone using Tapatalk

  • Like 1

Follow Alex's Reefing Journey @ 

 

 


 

Link to comment
Share on other sites

  • 3 weeks later...

Recently it seems like PH is one of the hot topic in the reefing community, both ours and the international scene, with much talk on how it spurs coral growth rates.

Want to share a little on one of my effort to manage my PH levels. Especially, with a calcium reactor and a generally poor air circulation around my tank area, it is no surprise that my PH levels will be a concern in the long run.

There’s quite a lot of chatter on CO2 scrubbers, and applying the recirculation methods and I decided to order a cheap canister from taobao and try it out too. Basically, the idea is to introduce CO2 scrubbed air into the skimmer and reduce the CO2 concentration in the tank water through the intense air exchange that happens the skimmer and consequently lower the ph.
68db0ad4fcd73bf0b8bb567d36f34934.jpg
Loaded the canister and attached the inlet valve to my skimmer and
5be1e4b0d83949f6e6dc1c98f0569e09.jpg

As you can see, the canister is pretty small for my setup but I managed to see about 0.07 increase in my PH levels.

43391384ad8b4e75189c3e51e22161b4.jpg

Not the numbers that I am contented with, especially when I need to meet my increased consumption of kh/ca due to the addition of more corals over these weeks. In addition, my Skimz skimmer runs on two pumps and hence two air intake, I decided I need to get another bigger scrubber that runs parallel.

I decided to get a fluidized reactor from Skimz to do the job.9b9a5ddc9a93225fe4043047baab9e6f.jpg

Basically, the idea is the same.. channel air through the FR center pipe to the bottom of the reactor, allow the air to pass through the media before exiting the reactor and into the skimmer.

This FM100 looks super neat and pro with double the media capacity and height compared to the cheap Taobao canister.

76f4cfff373eab85940a621f98f1d12d.jpg

The other trick that I have learned, is to create a DIY recirculation system.

This recirculating concept recycles the air from your skimmer that is already scrubbed of CO2 resulting in a much longer lifespan of the CO2 media.

So eventually, this is my final setup! Recirculating the Skimz FR and pulling ambient air for the taobao scrubber, which I am filling with TLF CO2 media to compare efficiency.

3aa7a6d41288ecfc3b17542d209a8a35.jpg

The media is starting to be exhausted. Notice how the media starts to change colour from the bottom for the Skimz FR but from the middle for the taobao one?

f0d458b9d5b12e763564d0ab7b511683.jpg

Something tells me that the FR seems to have a better design for this purpose. I am guessing it’s because the central pipe for the taobao one doesn’t run all the way to the bottom of the canister.

For those who wishes to consider setting up a CO2 Scrubber, I would definitely recommend you to try the Skimz FM100!


Sent from my iPhone using Tapatalk

Follow Alex's Reefing Journey @ 

 

 


 

Link to comment
Share on other sites

Nice! Any updates for your PH after adding the FM100?


Sent from my iPhone using Tapatalk

Hi Darren,

The ph graph looks like this after installing the additional FM100.

fe9ed7b6aac23e243a265d2b41788777.jpg


So I would think another 0.05 increase in general? I have also made some other changes like increasing effluent and reducing my kalk dosage. So may not be entirely accurate representation of the effect.

Oh. By the way, I also found out through a ph tank water airstone test, that my surface / tank aeration is too much compared to my ambient co2 levels in the room. Ie the co2 exchanges is happening faster than it can be removed sometimes. Made some changes on that too, ie increase aeration only during hours where ph of my tank is lower than an estimated ambient co2 levels.


Sent from my iPhone using Tapatalk
  • Like 1

Follow Alex's Reefing Journey @ 

 

 


 

Link to comment
Share on other sites


Hi Darren,

The ph graph looks like this after installing the additional FM100.

fe9ed7b6aac23e243a265d2b41788777.jpg


So I would think another 0.05 increase in general? I have also made some other changes like increasing effluent and reducing my kalk dosage. So may not be entirely accurate representation of the effect.

Oh. By the way, I also found out through a ph tank water airstone test, that my surface / tank aeration is too much compared to my ambient co2 levels in the room. Ie the co2 exchanges is happening faster than it can be removed sometimes. Made some changes on that too, ie increase aeration only during hours where ph of my tank is lower than an estimated ambient co2 levels.


Sent from my iPhone using Tapatalk

How long does your media in the Fm100 lasted for your tank consumption?


Sent from my iPhone using Tapatalk
Link to comment
Share on other sites

  • SRC Member

Thumbs up for proper pH management! 

Using CO2 scrubber in recirculation mode can significantly counter the high CO2 level in the rooms,  while significantly reduce the media consumption. 

Time to double up the reactor and push the pH even higher :thumbsup:

Link to comment
Share on other sites

  • 1 month later...

Teaser Video of a #tankofthemonth feature by Dreaming Reef’s YouTube Channel!



Stay tuned for the main video by subscribing and supporting this YouTube channel by one of our very own Singapore marine hobbyist influencer @ https://m.youtube.com/c/dreamingreef

P/s: he has many more interesting video content!


Sent from my iPhone using Tapatalk

Follow Alex's Reefing Journey @ 

 

 


 

Link to comment
Share on other sites

  • 1 month later...

Some updates on my sps dominated. Lost my Queen and anthias due to an ich outbreak. Probably a mistake when I got lazy and threw in some fishes without utilizing my QT…

Oh well, added a new batch of anthias after proper QT and a week has past and so far no casualties!

A video update for all!



Anyway, also got a new toy recently! Spot it in the photo below. So far aesthetic, installation and calibration has been tok gong!

Will monitor and do a simple review here soon!

9f401e9d7ab3b9d4e8ded0a8e8a768ee.jpg


Sent from my iPhone using Tapatalk

Follow Alex's Reefing Journey @ 

 

 


 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




  • Join us on the largest Reefing community in Asia!

    Sign up and share your reefing journey with us, make friends and get helps from the community .

     

  • Topics

  • Latest Update

    1. 0

      WTS Rockscape

    2. 0

      滑铁卢大学申请学校UW毕业证成绩单信封Q/微993398773办理加拿大大学毕业证文凭留信认证留服认证教育部认证回国证明加拿大本科文凭硕士学位证毕业证University of Western Ontario

    3. 0

      新南威尔士大学毕业证丢失UNSW毕业证成绩单Q/微993398773办理澳洲大学毕业证学位证留信认证留服认证教育部认证回国证明澳洲本科学位证硕士文凭成绩单University of New South Wales

    4. 0

      多伦多大学申请学校UT毕业证成绩单信封Q/微993398773办理加拿大大学毕业证文凭留信认证留服认证教育部认证回国证明加拿大本科文凭硕士学位证毕业证University of Toronto

×
×
  • Create New...