Jump to content

Battling deadly Bryopsis algae


Recommended Posts

  • SRC Supporter

Starting this thread to share some of my personal experience battling this nuisance algae which has been troubling my tank for almost 6 month.. 

my existing tank is more than 5 year now and It seem at some point it is true that for a very mature tank , all sort of problem might come especially algae.. 

in fact i have tried almost all the products out there , and sadly to say none really work. Some product manage to control it, but after awhile of cleaning and detoxify it with Hydrogne perxiode it seem to keep coming back again . 

i was actually  very worried about using medicine esp antibotic threatment on my tank  how it will affect my beloved fish and corals. However, after              doing my own research online, all the positive out come encourage me to try so.. 

This is a very detail explanation of the Fluconazole treatment from other forum here ( https://www.reef2reef.com/threads/bryopsis-cure-my-battle-with-bryopsis-using-fluconazole.285096/) which inspire me to try the treatment.

This is some photo of how bad the outbreak is before the treatment. 

 

 IMG_20190713_110958.jpgIMG_20190714_104103.jpgIMG_20190714_104059.jpg

IMG_20190713_110706.jpg
 

                                     IMG_20190713_110653.jpg

 

IMG_20190714_154320.jpg

IMG_20190714_104103.jpg

  • Thanks 1
Link to comment
Share on other sites

  • SRC Supporter

During treatment, i remove the skimmer cup and let it run to provide additional oxygen in the tank ..

Below is some photo of the same spot after 3rd day of treatment.. can see that the algae is started to weaken 

IMG_20190718_125216.jpg

IMG_20190718_125224.jpg

 

Link to comment
Share on other sites

  • SRC Supporter

After about 1 week after the treatment , all the bryopsis algae is gone and i am happy to share that it is a reef safe treatment and with no fish casualty loss :rolleyes:

however, i loss some SPS which i suspect could be due to the drop in water quality after the treatment.

 

IMG_20190725_141927.jpg

  • Thanks 1
Link to comment
Share on other sites

I faced the same problem too. I used fluxRX, which is basically  Fluconazole as well. Heres some before and after pic. Took about a week to see them disappear.

As mentioned, its reef safe. Didn't suffer any casualties.

2080247335_download(1).png.606cdae478c4bf786bec2c5b145375a5.png

476198491_download(2).png.5c88bf12feca11dac9020b7b3009c225.png

 

I Love Stagsss

Link to comment
Share on other sites

  • SRC Supporter
21 hours ago, he said:

After about 1 week after the treatment , all the bryopsis algae is gone and i am happy to share that it is a reef safe treatment and with no fish casualty loss :rolleyes:

however, i loss some SPS which i suspect could be due to the drop in water quality after the treatment.

 

IMG_20190725_141927.jpg

Thanks for sharing. Wonder what can be done to minimize collateral damage to corals.

 

Facebook : https://www.facebook.com/mysliceofnature/

 

 

 

 

 

Link to comment
Share on other sites

U can buy the fluxRx at some LFS... Think fresh n marine, iwarna, etc. Alternatively, some pharmacy store overseas. Locally think need prescription. Do chk out the law before buying from oversea. 

Tank : 4 X 2 X 2 with low iron front panel and external overflow

Skimmer : BK SM200 with waste collector

Return Pumps : Red Dragon 6m3 and Ehiem 1262

FR : 2 X Deltec 509 & powered by AB2000

Nitrate Filter : Deltec NF 509 and tee off from AB2000

Calcium R'tor : Deltec PF 501 with RM secondary chamber

Kalkwasser R'tor : Deltec KM500

Chiller : Pansonic 1 HP Compressor with 20m titanium Coil

Wave Makers : 4 X Tunze 6055 with 7096 & Vortec MP40w

Controller : GHL Profilux

Lighting : ATI Powermodule 10 or 8 tubes

Water Top-up : Water Top-Up tank powered by Tunze Osmolator

External Monitor : American Pinpoint pH and Temp. Monitor for main tank and GHL Profilux Controller to measure temp, pH, Redox

Ozonizer : Sander C50

UV : Corallife 6x

Algae Scrubbler

Link to comment
Share on other sites

On the 6th Sept my tank has a lot of bryosis

 

Bryosis.jpg

6.5 * 2 * 2 + 3.75 * 1.5 *1.5,(Decomn on 14/9/08)
4*2*2 + 2.5*1.25*1.25 (Decomn on 1/8/09)
5*2*2 (Fully LED light system, 140 3 watt SSC leds with 60 degree lens)(Decomm)
2.5*2*2(Fully LED Light System,96 3 watt SSC leds with 60 degree lens)(Decomm)

5*2.5*2(LED only)

Eheim return 1 * pump

1 HP Daikin compressor with cooling coil
2 Jebao OW40, 1 ecotech MP40,
1X6085 Tunze wm,

1 CURVE 7 Skimmer

  1 DIY 80 led control by Bluefish mini 

1 radion XR30W G2, 2 Radion XR15G3

Sump area lite by 5 ft T5 , 6 * SSC 3 watt red LED for refugium

1 Full spectrum E27 led light

1 CR control by bubble count

Start No Water Change since 1st Dec 2016

Add new 2.5x2x 1.5 ft 

 nLekOfpYts.jpg
[/quote]


 

Link to comment
Share on other sites

I dose whatever Fluconazole I have at hand on 6th Sept nite.

My tank is 685 litre. Recommended dosage is 3425 mg of Fluconazole.

I only has 1000 mg.

Just dose first and see how

6.5 * 2 * 2 + 3.75 * 1.5 *1.5,(Decomn on 14/9/08)
4*2*2 + 2.5*1.25*1.25 (Decomn on 1/8/09)
5*2*2 (Fully LED light system, 140 3 watt SSC leds with 60 degree lens)(Decomm)
2.5*2*2(Fully LED Light System,96 3 watt SSC leds with 60 degree lens)(Decomm)

5*2.5*2(LED only)

Eheim return 1 * pump

1 HP Daikin compressor with cooling coil
2 Jebao OW40, 1 ecotech MP40,
1X6085 Tunze wm,

1 CURVE 7 Skimmer

  1 DIY 80 led control by Bluefish mini 

1 radion XR30W G2, 2 Radion XR15G3

Sump area lite by 5 ft T5 , 6 * SSC 3 watt red LED for refugium

1 Full spectrum E27 led light

1 CR control by bubble count

Start No Water Change since 1st Dec 2016

Add new 2.5x2x 1.5 ft 

 nLekOfpYts.jpg
[/quote]


 

Link to comment
Share on other sites

On the 10th Sept night . That is 4th days after dosing 1/3 recommended Fluconazole dosage

 

aftertreat.jpg

6.5 * 2 * 2 + 3.75 * 1.5 *1.5,(Decomn on 14/9/08)
4*2*2 + 2.5*1.25*1.25 (Decomn on 1/8/09)
5*2*2 (Fully LED light system, 140 3 watt SSC leds with 60 degree lens)(Decomm)
2.5*2*2(Fully LED Light System,96 3 watt SSC leds with 60 degree lens)(Decomm)

5*2.5*2(LED only)

Eheim return 1 * pump

1 HP Daikin compressor with cooling coil
2 Jebao OW40, 1 ecotech MP40,
1X6085 Tunze wm,

1 CURVE 7 Skimmer

  1 DIY 80 led control by Bluefish mini 

1 radion XR30W G2, 2 Radion XR15G3

Sump area lite by 5 ft T5 , 6 * SSC 3 watt red LED for refugium

1 Full spectrum E27 led light

1 CR control by bubble count

Start No Water Change since 1st Dec 2016

Add new 2.5x2x 1.5 ft 

 nLekOfpYts.jpg
[/quote]


 

Link to comment
Share on other sites

Run longer to ensure totally eliminated. Know someone thought everything gone and issue came back weeks later, and he has to restart the treatment again. 

Tank : 4 X 2 X 2 with low iron front panel and external overflow

Skimmer : BK SM200 with waste collector

Return Pumps : Red Dragon 6m3 and Ehiem 1262

FR : 2 X Deltec 509 & powered by AB2000

Nitrate Filter : Deltec NF 509 and tee off from AB2000

Calcium R'tor : Deltec PF 501 with RM secondary chamber

Kalkwasser R'tor : Deltec KM500

Chiller : Pansonic 1 HP Compressor with 20m titanium Coil

Wave Makers : 4 X Tunze 6055 with 7096 & Vortec MP40w

Controller : GHL Profilux

Lighting : ATI Powermodule 10 or 8 tubes

Water Top-up : Water Top-Up tank powered by Tunze Osmolator

External Monitor : American Pinpoint pH and Temp. Monitor for main tank and GHL Profilux Controller to measure temp, pH, Redox

Ozonizer : Sander C50

UV : Corallife 6x

Algae Scrubbler

Link to comment
Share on other sites

Thank You for sharing

5 hours ago, Solo77 said:

Run longer to ensure totally eliminated. Know someone thought everything gone and issue came back weeks later, and he has to restart the treatment again. 

 

6.5 * 2 * 2 + 3.75 * 1.5 *1.5,(Decomn on 14/9/08)
4*2*2 + 2.5*1.25*1.25 (Decomn on 1/8/09)
5*2*2 (Fully LED light system, 140 3 watt SSC leds with 60 degree lens)(Decomm)
2.5*2*2(Fully LED Light System,96 3 watt SSC leds with 60 degree lens)(Decomm)

5*2.5*2(LED only)

Eheim return 1 * pump

1 HP Daikin compressor with cooling coil
2 Jebao OW40, 1 ecotech MP40,
1X6085 Tunze wm,

1 CURVE 7 Skimmer

  1 DIY 80 led control by Bluefish mini 

1 radion XR30W G2, 2 Radion XR15G3

Sump area lite by 5 ft T5 , 6 * SSC 3 watt red LED for refugium

1 Full spectrum E27 led light

1 CR control by bubble count

Start No Water Change since 1st Dec 2016

Add new 2.5x2x 1.5 ft 

 nLekOfpYts.jpg
[/quote]


 

Link to comment
Share on other sites

  • 2 weeks later...
  • SRC Member
On ‎9‎/‎5‎/‎2019 at 11:39 AM, he said:

This is the one I usedIMG_20190905_092626.jpeg

Sent from Singapore Reef Club mobile app
 

Thank you so much for this post.  I have been battling Bryopsis for months too.  So just follow the instruction on the bottle?  Or must "tweak" it a bit?  Need stop Skimmer and Algae Scrubber?

Link to comment
Share on other sites

  • 1 month later...
  • 3 weeks later...
  • 3 months later...
  • SRC Supporter

Usually a single treatment would do the trick

Bought FluRX few weeks ago, but haven’t started treatment.
Just want to clarify, this is a Single Dosage treatment, and not Daily Dose, correct?


Sent from Singapore Reef Club mobile app

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share



×
×
  • Create New...