Jameshong Posted April 28, 2019 Share Posted April 28, 2019 Shipping fee is not going to be cheap..Sent from my HMA-L29 using Tapatalk Quote Knowing is not enough; we must apply. Willing is not enough; we must do. - Goethe Link to comment Share on other sites More sharing options...
SRC Member Missyleng Posted May 5, 2019 SRC Member Share Posted May 5, 2019 Will the glass be broken during shipping? Sent from Singapore Reef Club mobile app Quote Link to comment Share on other sites More sharing options...
Jameshong Posted May 12, 2019 Share Posted May 12, 2019 Need special packing and shipping insurance...Sent from my HMA-L29 using Tapatalk Quote Knowing is not enough; we must apply. Willing is not enough; we must do. - Goethe Link to comment Share on other sites More sharing options...
SRC Member marine1983 Posted May 14, 2019 Author SRC Member Share Posted May 14, 2019 Hi Bros any advice on piping work? I haven't glued up. Don't want to make any mistakes on piping. Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
SRC Member Clement Chen Posted May 14, 2019 SRC Member Share Posted May 14, 2019 Wow looking good! Can share how much u spend in total? Quote Clem's Clam Corner (Decommed) 60cm x 40cm x 30cm Tank Nano tank reboot v2.0 Link to comment Share on other sites More sharing options...
Solo77 Posted May 14, 2019 Share Posted May 14, 2019 Advice as in? I think you should as the manufacturer on the do and dons. The pipes should be pre cut. Just assemble first and confirm before using glue to apply on joints. Quote Tank : 4 X 2 X 2 with low iron front panel and external overflow Skimmer : BK SM200 with waste collector Return Pumps : Red Dragon 6m3 and Ehiem 1262 FR : 2 X Deltec 509 & powered by AB2000 Nitrate Filter : Deltec NF 509 and tee off from AB2000 Calcium R'tor : Deltec PF 501 with RM secondary chamber Kalkwasser R'tor : Deltec KM500 Chiller : Pansonic 1 HP Compressor with 20m titanium Coil Wave Makers : 4 X Tunze 6055 with 7096 & Vortec MP40w Controller : GHL Profilux Lighting : ATI Powermodule 10 or 8 tubes Water Top-up : Water Top-Up tank powered by Tunze Osmolator External Monitor : American Pinpoint pH and Temp. Monitor for main tank and GHL Profilux Controller to measure temp, pH, Redox Ozonizer : Sander C50 UV : Corallife 6x Algae Scrubbler Link to comment Share on other sites More sharing options...
SRC Member marine1983 Posted May 14, 2019 Author SRC Member Share Posted May 14, 2019 Advice as in? I think you should as the manufacturer on the do and dons. The pipes should be pre cut. Just assemble first and confirm before using glue to apply on joints. Thanks. Just wondering if the setup looks right. Don't want to glue and recut. Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
SRC Member Indeco Posted May 14, 2019 SRC Member Share Posted May 14, 2019 What is that for? Quote Link to comment Share on other sites More sharing options...
SRC Member marine1983 Posted May 14, 2019 Author SRC Member Share Posted May 14, 2019 What is that for? Thought bean animal secondary drain needed that? With a hole on top? I'm basing on Google haha. First time setting up sumpSent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
SRC Member Indeco Posted May 14, 2019 SRC Member Share Posted May 14, 2019 Thought bean animal secondary drain needed that? With a hole on top? I'm basing on Google haha. First time setting up sump Sent from my iPhone using Tapatalk Oh ok. I never study bean animal concept before. U got 1 pipe how come water outlet so high? But look like last over flow? Quote Link to comment Share on other sites More sharing options...
SRC Member marine1983 Posted May 14, 2019 Author SRC Member Share Posted May 14, 2019 Oh ok. I never study bean animal concept before.U got 1 pipe how come water outlet so high? You using for carbon/GFO? Oh thought it's the secondary emergency so in case primary emergency also clogged. It will splash wash down so very obvious sth is wrong. Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
SRC Member Indeco Posted May 14, 2019 SRC Member Share Posted May 14, 2019 Erm you are right I think bean animal got 3 downflow. But the outlet like bit too high liao, maybe u want to make the pipe longer to avoid splash.But it depend how u adjust ur water level also. Maybe u can trial and error when u cycle your tank that time. Quote Link to comment Share on other sites More sharing options...
SRC Member marine1983 Posted May 14, 2019 Author SRC Member Share Posted May 14, 2019 Thanks! That will probably take another month given my schedule with travels in juneSent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
Solo77 Posted May 14, 2019 Share Posted May 14, 2019 There should be instruction booklet. Just follow closely. The down pipe knots should allow u to adjust. I presume the design won't have issue of water drawback when the return pump failed. Looks nice and think alot of ppl interested to know more details for an other avenue in getting tank. Mind pm me the estimation for reference. U can hold open house... Lol and charge touring fee. Haha. Quote Tank : 4 X 2 X 2 with low iron front panel and external overflow Skimmer : BK SM200 with waste collector Return Pumps : Red Dragon 6m3 and Ehiem 1262 FR : 2 X Deltec 509 & powered by AB2000 Nitrate Filter : Deltec NF 509 and tee off from AB2000 Calcium R'tor : Deltec PF 501 with RM secondary chamber Kalkwasser R'tor : Deltec KM500 Chiller : Pansonic 1 HP Compressor with 20m titanium Coil Wave Makers : 4 X Tunze 6055 with 7096 & Vortec MP40w Controller : GHL Profilux Lighting : ATI Powermodule 10 or 8 tubes Water Top-up : Water Top-Up tank powered by Tunze Osmolator External Monitor : American Pinpoint pH and Temp. Monitor for main tank and GHL Profilux Controller to measure temp, pH, Redox Ozonizer : Sander C50 UV : Corallife 6x Algae Scrubbler Link to comment Share on other sites More sharing options...
SRC Member marine1983 Posted May 14, 2019 Author SRC Member Share Posted May 14, 2019 There should be instruction booklet. Just follow closely. The down pipe knots should allow u to adjust. I presume the design won't have issue of water drawback when the return pump failed. Looks nice and think alot of ppl interested to know more details for an other avenue in getting tank. Mind pm me the estimation for reference. U can hold open house... Lol and charge touring fee. Haha. Haha newbie here la. Just wanna try diy rather than get a set from local makers. Enjoy the design and build process haha. No manufacture booklet. I deliberately bought from different shops to economise on costs and due to seller inventory issues. Paiseh to have open house la. Such a tiny tank haha. Will pm you the estimateSent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
SRC Member Indeco Posted May 14, 2019 SRC Member Share Posted May 14, 2019 Do keep us posted after u complete the setup and doing your cycling.I'm also curious on the tank maker details, can PM me also bro?I'm wanted to see they can help to design a customise sump. Quote Link to comment Share on other sites More sharing options...
SRC Member marine1983 Posted May 18, 2019 Author SRC Member Share Posted May 18, 2019 Hi all, just want to share this in case you want to order from the taobao company that I bought from. There is a chip for the sump at the corner (circled in red) that I just found today! It's not from shipping. Tank company guy tried to cover it up with silicone as seen in the photo. I missed it initially because it was so small and I only found it today as I was cleaning sump in my toilet and let it stand up vertically. I'm thinking of putting another piece of base glass (cut to size) in the sump compartment so that there is more silicone bonded area to the back glass which is the corner chip. Tank maker says that it for sure won't leak but I just want peace of mind by layering another 8mm glass on top. Another option is to get a new sump locally. Any recommendation and price range?Meanwhile waiting for the company to respond. They have admitted that it's their fault but only want to compensate partially but I want a full refund since I already paid for SG shipping separately. Photos as attached Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
SRC Member oceanviper Posted May 18, 2019 SRC Member Share Posted May 18, 2019 1 hour ago, marine1983 said: Hi all, just want to share this in case you want to order from the taobao company that I bought from. There is a chip for the sump at the corner (circled in red) that I just found today! It's not from shipping. Tank company guy tried to cover it up with silicone as seen in the photo. I missed it initially because it was so small and I only found it today as I was cleaning sump in my toilet and let it stand up vertically. I'm thinking of putting another piece of base glass (cut to size) in the sump compartment so that there is more silicone bonded area to the back glass which is the corner chip. Tank maker says that it for sure won't leak but I just want peace of mind by layering another 8mm glass on top. Another option is to get a new sump locally. Any recommendation and price range? Meanwhile waiting for the company to respond. They have admitted that it's their fault but only want to compensate partially but I want a full refund since I already paid for SG shipping separately. Photos as attached Sent from my iPhone using Tapatalk Hi bro. You can try with Kwang Lim Frame at Kelantan Lane. The price is affordable and depend on the dimension and thickness of the glass. I have mine for SGD200 for 3 ft sump with 6mm glass. Quote Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 ) Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7 Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 ) Compressor drop-in coil Wavemaker : Tunze 6105 x 1 Lights : Modular based DIY LED light x 4 Chaeto in the sump Link to comment Share on other sites More sharing options...
SRC Member marine1983 Posted May 18, 2019 Author SRC Member Share Posted May 18, 2019 thanks man. I will go and check with them. Much appreciated your help!Sent from my iPad using Tapatalk Quote Link to comment Share on other sites More sharing options...
SRC Supporter Harlequinmania Posted October 1, 2019 SRC Supporter Share Posted October 1, 2019 I think that's the risk with buying big bulky and fragile item from oversea as shipping such item safely is not easy ..Sent from Singapore Reef Club mobile app Quote 1000 Gallon Tank in the Hole http://www.sgreefclub.com/forum/topic/120957-1000-gallon-3d-hole-in-the-wall/ Link to comment Share on other sites More sharing options...
Alco Posted June 18, 2020 Share Posted June 18, 2020 Can you share the link for the tank and stand? Thanks. Sent from Singapore Reef Club mobile app Quote Link to comment Share on other sites More sharing options...
SRC Member marine1983 Posted June 18, 2020 Author SRC Member Share Posted June 18, 2020 hi realised that I shouldn't post the links here. Removed. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.