Jump to content

Ong Lai Reef


alexcyf
 Share

Recommended Posts

  On 6/5/2018 at 3:55 AM, daveyy said:

I see your controller box are well under the overflow box, arent u afraid of leakage / union failure or even fish splash water out of the tank? I see there is a wooden board under it, but water will find its way if there are enough of them.

i always think the controller box should be situated away from potential leakage. My next tank i would design it to be beside / or slightly abv the overflow with a wooden plank partioning it, almost like another door within the drawer. Haha. Hard to explain. A door within a door, door ception. 

 

But nonetheless. Very impressive build to incorporate the water change system within the capentry. Good idea for my next build. 

Expand  

Think that’s the most convenient space available to house e controllers and still keep stuff hidden.

At least there’s a wooden box to house the wires :P My current tank hor.. all e plugs and wires are in a mess and subjected to splashes and condensation from my sump tank! Guess most other tanks will suffer similar fate if their union fails, pipe leaks or fishes jump have to pray hard haha

Follow Alex's Reefing Journey @ 

 

 


 

Link to comment
Share on other sites

The sump is generally an unconventional design, with a long refuigum compartment that we do not know what exactly to do about it yet.. would it be to keep new fishes as a feeding training ground, or to keep it as a species tank, for picky eaters such as seahorses or frogfishes, or even a possible frag tank in future..

Nonetheless the photo shows the basic set of equipment, which probably is still short of the macroalgae reactor from Skimz and a dosing pump if the tank is ready for hard corals.. hope it will stay neat and clean throughout the lifespan of this tank!!FB61E82C-4C73-43E0-9DAA-1C438148DAFE.thumb.jpeg.895293aecd5f50c0a7dc3cc449588aee.jpeg12A2BE76-10A8-4BB3-8CEC-0092943794CF.thumb.jpeg.ed1c6ccb520adcadc6b5783cd70ba8eb.jpegCFC12594-5203-4B63-BEE2-BA6AA3589115.thumb.jpeg.2e173204279204c00ef9726a5f0bca80.jpeg

Follow Alex's Reefing Journey @ 

 

 


 

Link to comment
Share on other sites

  • SRC Member

Hmmm. The constant vibration by the pump would disintegrate the marine pure bit by bit.

U could consider using a acrylic stand or ask the tank maker to help you make a skimmer stand. Thats what i asked my tank maker to do and it wasnt expensive.

There is a risk the skimmer might fall off and the water will be skim directly onto the floor.


Sent from Singapore Reef Club mobile app

Link to comment
Share on other sites

Very detailed planning. Nice work.

Display Tank : 36" x 20" x 20" Herbie overflow box design, Sump : 36" x 21" x 17", Frag Tank : 16” x 20” x 16”, custom built by Tank Culture.

Lightings : Ecotech  Radion XR15 Pro x 2 for Main Display Tank, Inled R80 x 1 for Frag Tank.

Chiller : Dalkin 1hp compressor with build-in drop coil.

Skimmer : Skimz Octa SC205i Protein Skimmer.

FR : H2Ocean FMR75 Fluidised Media Reactor with Hailea HX-2500 (Feeder Pump) running Rowaphos.

CR : Skimz Monzter E Series CM122 Calcium Reactor.

BPR: Marine Source Biopellet  Reactor with Continuum Reef Biopellet Fuel. 

Main Return Pump : SICCE Syncra ADV 9.0 & Jebao ACQ-10000 Water Pump.

Wavemaker : Jebao MOW-9 x2 for Main Display Tank & Jebao SLW-20M  Sine Wave Pump for  Frag Tank.

Water Top Up: AutoAqua Smart ATO Lite.

Link to comment
Share on other sites

  On 6/8/2018 at 5:35 AM, daveyy said:

Hmmm. The constant vibration by the pump would disintegrate the marine pure bit by bit.

U could consider using a acrylic stand or ask the tank maker to help you make a skimmer stand. Thats what i asked my tank maker to do and it wasnt expensive.

There is a risk the skimmer might fall off and the water will be skim directly onto the floor.


Sent from Singapore Reef Club mobile app

Expand  

Ops, din realised this photo was taken then. That was temporary. The skimmer was just running in. Now its standing just on the egg crate stand.

Follow Alex's Reefing Journey @ 

 

 


 

Link to comment
Share on other sites

  On 6/8/2018 at 4:22 AM, Uask4it said:

The effective working height for your skimmer should be quite low, which you need to raise it. 

Powerful skimmer with scary foam.   

Expand  

Yup. thats why I had to fix it up with a stand. especially cuz the sump water level was deliberately kept higher than usual to allow more water volume.

right now after the skimmer has run in, its more stable and I can adjust the water controller level lower to dry skim.

Follow Alex's Reefing Journey @ 

 

 


 

Link to comment
Share on other sites

  • SRC Member
  On 6/8/2018 at 6:32 AM, alexcyf said:

Ops, din realised this photo was taken then. That was temporary. The skimmer was just running in. Now its standing just on the egg crate stand.

Expand  

Hi bro. Any idea where to get the egg crate stand? My skimmer still running on top of my marine block lol. 

Link to comment
Share on other sites

  • SRC Member

I think he meant he diy it.

 

U can go to some fresh water lfs to purchase a huge sheet for i think $20odd dollar, roughly 422 size iirc. But u need to find the right kind, the rigid type. There is another softer kind which ppl use, those that can piece them up into a bigger piece. I suggest you stay away from that, that is too weak to support the skimmer weight.

 

 

Sent from Singapore Reef Club mobile app

 

Link to comment
Share on other sites

  On 6/8/2018 at 6:56 AM, daveyy said:

I think he meant he diy it.

 

U can go to some fresh water lfs to purchase a huge sheet for i think $20odd dollar, roughly 422 size iirc. But u need to find the right kind, the rigid type. There is another softer kind which ppl use, those that can piece them up into a bigger piece. I suggest you stay away from that, that is too weak to support the skimmer weight.

 

 

Sent from Singapore Reef Club mobile app

 

Expand  

Yup. And buy some pvc pipes as “legs” for the stabd, cable tie them up. 

Follow Alex's Reefing Journey @ 

 

 


 

Link to comment
Share on other sites

  • SRC Member
  On 6/8/2018 at 6:56 AM, daveyy said:

I think he meant he diy it.

 

U can go to some fresh water lfs to purchase a huge sheet for i think $20odd dollar, roughly 422 size iirc. But u need to find the right kind, the rigid type. There is another softer kind which ppl use, those that can piece them up into a bigger piece. I suggest you stay away from that, that is too weak to support the skimmer weight.

 

 

Sent from Singapore Reef Club mobile app

 

Expand  

Thanks bro! 

Link to comment
Share on other sites

  • SRC Member
  On 6/8/2018 at 6:35 AM, alexcyf said:

Yup. thats why I had to fix it up with a stand. especially cuz the sump water level was deliberately kept higher than usual to allow more water volume.

right now after the skimmer has run in, its more stable and I can adjust the water controller level lower to dry skim.

Expand  

Thanks for your reply.

  On 6/8/2018 at 6:32 AM, alexcyf said:

Ops, din realised this photo was taken then. That was temporary. The skimmer was just running in. Now its standing just on the egg crate stand.

Expand  

I have one new unused stand TS-16 with box, sell you at $12 if you prefer solid stand. PM me.

https://item.taobao.com/item.htm?id=524018563372

 

Link to comment
Share on other sites

Think my stand can suffice for now! Think Jeebusai can consider!

  On 6/8/2018 at 1:41 PM, Uask4it said:

Thanks for your reply.

I have one new unused stand TS-16 with box, sell you at $12 if you prefer solid stand. PM me.

https://item.taobao.com/item.htm?id=524018563372

 

Expand  

 

Follow Alex's Reefing Journey @ 

 

 


 

Link to comment
Share on other sites

Backtracked to the day the tank is filled with water. For this RODI with booster pump, it really took an amazing short period of time to fill up the tank. I was thinking more than a day but within 10 hours e tank is filled. Guess u guys can tell the rate of the water from e photo below..711EA07B-544B-4635-91CF-55258F1425DA.thumb.jpeg.a25eec1313064a9beeb8b60c89f716d8.jpeg

anyway, really love the rocks from Caribsea. Not very good with scaping the caribsea branching rocks. Ended up with a scape that look like a dragon :P haha but the shapes of the base rocks and arcs are beautiful, with lotsa cervices that will make it very easy to stick corals. Would highly recommend the rocks to Reefers building a new scape!

heres e view of the scape with all 3 sides! The caribsea Bimini pink sand is beautiful too, picked this for e small red pebbles that makes it more natural, and give some weight to the finer sand to prevent them from flying aroundD129AD62-E155-49EE-95AD-D48740B7BE16.thumb.jpeg.0d0bc7765473a945a233fd6420c485b0.jpeg9EEF6C66-511C-4A2C-BE88-1E748C992457.thumb.jpeg.ee8d7963ba4e12547f25836a3c8ebc42.jpeg9F334610-A19D-4665-94EC-500824217635.thumb.jpeg.1055006fd532d022619c541b2208804f.jpeg

Follow Alex's Reefing Journey @ 

 

 


 

Link to comment
Share on other sites

Introducing some of the first inhabitants of the Ong Lai reef!

Home Bred Clowns from Alexcyf’s and the last White Tail Bristletooth from Iwarna!A9D36A7D-C730-4AD7-9198-3AC3A11B6545.thumb.jpeg.c602cc53559daa4be6e28945cdadc7cb.jpegBD62C597-7B74-49C4-9A72-DA9A52DCFB2E.thumb.jpeg.34af19e580a69ebf16e991df33861478.jpeg

  • Like 1

Follow Alex's Reefing Journey @ 

 

 


 

Link to comment
Share on other sites

Heard some good reviews about the Skimz Macroalgae reactor.. so decided to try it with this new tank build. Has a nice outlook and an opaque exterior that keeps the light in and looks cool.. has a clear top view which you can see the chaeto and e flow inside

2892D5D0-B172-480D-8782-B342C40A62E1.jpeg.948a49603a7c432cc95ea81851879f6a.jpeg

F7B472D2-C5AB-4F43-AD95-0BF2856CC7C7.thumb.png.514ed06254f579abb29dfdbc7588134f.pngthe reactor is pretty easy to set up. Has adjustable speed to moderate the flow rate and lots of space for chaeto to grow. Here is the initial amount of chaeto in e reactor.4D5914E3-F805-401F-8250-4B058CAB2225.thumb.jpeg.4cbb648893db4b57780f8022fb86e607.jpeg

and here’s the growth after 18 days :)176A989F-ACC7-4B2D-8E00-789E792331FE.thumb.jpeg.88d3ed7f4a311cbb063b9745cc4c667a.jpeg

 

Follow Alex's Reefing Journey @ 

 

 


 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share




×
×
  • Create New...