Jump to content

My new small 16 litre Nano tank


Tabungrahim
 Share

Recommended Posts

  • SRC Member

My fish all die. It's high salinity can cause fish to die. This is the third fish. What should i do? Now I just throw halve the water n pour mineral water in coz I got no ro water. Do u think it will be fine. Now check salinity stable but I don't know whether the coral can survive or not? The fish already died after several hours in the tank.
Pls help me newbies here.
Still trying try n error

Sent from my CPH1611 using Tapatalk

Link to comment
Share on other sites

My fish all die. It's high salinity can cause fish to die. This is the third fish. What should i do? Now I just throw halve the water n pour mineral water in coz I got no ro water. Do u think it will be fine. Now check salinity stable but I don't know whether the coral can survive or not? The fish already died after several hours in the tank.
Pls help me newbies here.
Still trying try n error

Sent from my CPH1611 using Tapatalk



What is your salinity now?

Bring it down slowly through a series of small water changes over a few weeks so your corals don’t get shocked.

Not sure about mineral water, but I will just use tap water and anti chlorine if you don’t have rodi


Sent from Singapore Reef Club mobile app
Link to comment
Share on other sites

Its sad to hear about your lost.

But this hobby need patience. 

Do not buy on impulse.

Make sure your water is ready before you add livestock

There is no shortcut

6.5 * 2 * 2 + 3.75 * 1.5 *1.5,(Decomn on 14/9/08)
4*2*2 + 2.5*1.25*1.25 (Decomn on 1/8/09)
5*2*2 (Fully LED light system, 140 3 watt SSC leds with 60 degree lens)(Decomm)
2.5*2*2(Fully LED Light System,96 3 watt SSC leds with 60 degree lens)(Decomm)

5*2.5*2(LED only)

Eheim return 1 * pump

1 HP Daikin compressor with cooling coil
2 Jebao OW40, 1 ecotech MP40,
1X6085 Tunze wm,

1 CURVE 7 Skimmer

  1 DIY 80 led control by Bluefish mini 

1 radion XR30W G2, 2 Radion XR15G3

Sump area lite by 5 ft T5 , 6 * SSC 3 watt red LED for refugium

1 Full spectrum E27 led light

1 CR control by bubble count

Start No Water Change since 1st Dec 2016

Add new 2.5x2x 1.5 ft 

 nLekOfpYts.jpg
[/quote]


 

Link to comment
Share on other sites

  • SRC Member
Its sad to hear about your lost.
But this hobby need patience. 
Do not buy on impulse.
Make sure your water is ready before you add livestock
There is no shortcut
True bro all need patience. Now left with another ios tank with only damsel n rock. So I slowly relax myself before I start again. Failure wont stop me! I will be back but slowly n steady.

Sent from my CPH1611 using Tapatalk

Link to comment
Share on other sites

Great. Need help can PM me

 

6.5 * 2 * 2 + 3.75 * 1.5 *1.5,(Decomn on 14/9/08)
4*2*2 + 2.5*1.25*1.25 (Decomn on 1/8/09)
5*2*2 (Fully LED light system, 140 3 watt SSC leds with 60 degree lens)(Decomm)
2.5*2*2(Fully LED Light System,96 3 watt SSC leds with 60 degree lens)(Decomm)

5*2.5*2(LED only)

Eheim return 1 * pump

1 HP Daikin compressor with cooling coil
2 Jebao OW40, 1 ecotech MP40,
1X6085 Tunze wm,

1 CURVE 7 Skimmer

  1 DIY 80 led control by Bluefish mini 

1 radion XR30W G2, 2 Radion XR15G3

Sump area lite by 5 ft T5 , 6 * SSC 3 watt red LED for refugium

1 Full spectrum E27 led light

1 CR control by bubble count

Start No Water Change since 1st Dec 2016

Add new 2.5x2x 1.5 ft 

 nLekOfpYts.jpg
[/quote]


 

Link to comment
Share on other sites

  • SRC Member

stop buying fish or corals or anemone. or any livestocks. you are just going to get more dead animals the more u do this till you end up decomming cause you keep flushing money down the toilet.

stop adding any corals/anemones. if your fish can die within hours, what more corals/anemone.

keep one tank, suggest the ios with livestock. the other one decomm.

wait for nitrite and ammonia to to drop to zero. not cause its toxic but that means there's still ammonia, which is toxic to fishes, present. btw to whoever is reading, nitrite is not as toxic as others have stated. read the following link and see how high can a tank-bred clownfish stand nitrite levels. http://reefkeeping.com/issues/2005-06/rhf/index.php. unless there's a new study proving otherwise, its to clear misconceptions.

change 50% of the water once ammonia/nitrite zero.  

meantime, feed your damsel. thats it. dont add anything anymore. 

if you can do this, then its a good first step.

Quis custodiet ipsos custodes

Too many people spend money they haven't earned to buy things they don't want to impress people they don't like.

Link to comment
Share on other sites

I believe water is really the foundation of any tank, even more so for a nano tank. so really need to be patient and ensure water is stable before introducing fishes and corals.

we wouldn't build our house with straws because the big bad wolf will blow our house down. same theory for a tank. haha.

all the best and hope you will persevere with this hobby!! fighting~! 

Link to comment
Share on other sites

  • SRC Member

If you are in it for the long term, invest in refractometer in order to know what your salinity is. I would consider reliable test kits staple equipment too.

& pls stop buying more livestock to throw in “to see if your water is ok”. We learn hard lessons as we go in our way in the hobby but one of the most important lesson is that we as hobbyists have a responsibility to the livestock once we buy them from the LFS or other reefers. Damsel or not, it is still a life. Sometimes the gravity of this tends to get away.

Staying tuned to when you have some water parameters to share so that all of us here can help you out.

lastly, this hobby needs patience......... so cliche but so true

Link to comment
Share on other sites

Normal salinity 1.020 to 1.024.....if u buy stock and don't acclimatize properly.. Yr livestock may get 'shock' and die... Shrimp is very sensitive. 

Tank : 4 X 2 X 2 with low iron front panel and external overflow

Skimmer : BK SM200 with waste collector

Return Pumps : Red Dragon 6m3 and Ehiem 1262

FR : 2 X Deltec 509 & powered by AB2000

Nitrate Filter : Deltec NF 509 and tee off from AB2000

Calcium R'tor : Deltec PF 501 with RM secondary chamber

Kalkwasser R'tor : Deltec KM500

Chiller : Pansonic 1 HP Compressor with 20m titanium Coil

Wave Makers : 4 X Tunze 6055 with 7096 & Vortec MP40w

Controller : GHL Profilux

Lighting : ATI Powermodule 10 or 8 tubes

Water Top-up : Water Top-Up tank powered by Tunze Osmolator

External Monitor : American Pinpoint pH and Temp. Monitor for main tank and GHL Profilux Controller to measure temp, pH, Redox

Ozonizer : Sander C50

UV : Corallife 6x

Algae Scrubbler

Link to comment
Share on other sites

  • SRC Member

Nice! Have you bought any refractometer ot test kits? I will think minimal will be to check for Salinity & Ammonia (Min). I started with 3 test kits. Now i have so many  i dont want to count LOL. BTW, I am a newbie too, but I agree that correct and stable water parameters is of utmost importance! Happy reefing!

 

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share




  • Join us on the largest Reefing community in Asia!

    Sign up and share your reefing journey with us, make friends and get helps from the community .

     

  • Topics

  • Latest Update

    1. 0

      加拿大保录取_SFU毕业证成绩单——Q微信751558146西蒙菲莎大学学位证_成绩单_办理SFU文凭学历认证Simon Fraser University

    2. 0

      美国学位证_Brandeis毕业证成绩单+Q微信751558146布兰迪斯大学学位证_成绩单_办理Brandeis文凭学历认证Brandeis University

    3. 0

      加拿大保录取_UBC毕业证成绩单——Q微信751558146英属哥伦比亚大学学位证_成绩单_办理UBC文凭学历认证University of British Columbia

    4. 0

      美国学位证_PSU毕业证成绩单+Q微信751558146宾州州立大学学位证_成绩单_办理PSU文凭学历认证Penn State University Park

×
×
  • Create New...