Jump to content

Wiring up an Iwaki MX70


Achilles Tang
 Share

Recommended Posts

Hi Robe,

Need some advice.

Opened up the cover of the Iwaki pump's electrical points (doh).

No symbols to indicate which point does the live and neutral wires go to and where exactly should the ground wire be? In the same box or outside on the metal casing itself?

:blink:

post-9-1045034762.jpg

Link to comment
Share on other sites

Check using a multimeter to see which of the terminals are connected to the capacitor (black rectangular box w/ gray wire). Do a continuity check by touching the probe to one of the capacitor terminal and the other probe to either of the terminal connector. The terminal w/ the continuity to the capacitor is the neutral terminal.

Ground the earth wire to the screw attached to the motor body.

Link to comment
Share on other sites

Alvy says any terminal to wire the live and neutral will do. And I did... it's working perfectly. I grounded the iwaki too.

It's working fabulously on my new alvyfoamer... lots of power and foam. Just that the 250watts consumption is a little hard to swallow.

Hee! :P

Link to comment
Share on other sites

  • SRC Member
Alvy says any terminal to wire the live and neutral will do. And I did... it's working perfectly. I grounded the iwaki too.

It's working fabulously on my new alvyfoamer... lots of power and foam. Just that the 250watts consumption is a little hard to swallow.

Hee! :P

250W running on 24/7....????

Heh heh heh...........

You trying to contest me for the highest wattage per reef consumption??? :P:P

Link to comment
Share on other sites

  • SRC Member

Phang please set up more SPS tanks cause I am thinking of getting some shares in Singapore Power. :lol:

post-36-1093875548.jpg

Warning: Heavy handed moderator in operation. Threads and post are liable to be deleted or moved without prior notification.

Moderator's prerogative will be enforced.

Any grievances or complains should be addressed to The Administrator.

http://www.sgreefclub.com/forum/uploads/post-36-1073276974.gif post-36-1073276974.gif

Link to comment
Share on other sites

250W running on 24/7....????

Heh heh heh...........

You trying to contest me for the highest wattage per reef consumption??? :P:P

Nah... I will probably put my PS on timer so after lights off, when I feed my phytoplankton... the corals will get a good feeding without me worrying that the skimmer will remove plankton before they do... I doubt if live plankton will get removed as quickly as dead foods/amino acid foods but it will help me save a few hours of electricity at least! Hee hee!

Phang, you are getting an iwaki yourself rite? ;)

Link to comment
Share on other sites

  • SRC Member

AT ... finally got your super skimmer running yea....show some pic okie.

Lucky for me, my HK friend got my MX70 wired up before hand carry to me.....kee..kee... Save all the trouble.

Link to comment
Share on other sites

AT ... finally got your super skimmer running yea....show some pic okie.

Lucky for me, my HK friend got my MX70 wired up before hand carry to me.....kee..kee... Save all the trouble.

It's actually very easy.... even an electrical moron like me could wire it up in a jiffy... once pointed the right way! :P

Thanks to Alvy and Robe for their guidance! :thanks:

Link to comment
Share on other sites

  • SRC Member

Phang,

MD40R won't be sufficient for your beckett skimmer. I use a MD40R for my tiny downdraft skimmer.

post-36-1093875548.jpg

Warning: Heavy handed moderator in operation. Threads and post are liable to be deleted or moved without prior notification.

Moderator's prerogative will be enforced.

Any grievances or complains should be addressed to The Administrator.

http://www.sgreefclub.com/forum/uploads/post-36-1073276974.gif post-36-1073276974.gif

Link to comment
Share on other sites

  • SRC Member
Phang,

MD40R won't be sufficient for your beckett skimmer. I use a MD40R for my tiny downdraft skimmer.

I think I give up Beckett Skimming.....

This hobby's gonna kill me!!!!!!!!!!....

Stay tune the next time for closing down sale of my Acro colonies and frags in the Pasar Malamm section..... :yeah:

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share



  • Join us on the largest Reefing community in Asia!

    Sign up and share your reefing journey with us, make friends and get helps from the community .

     

  • Topics

  • Latest Update

    1. 0

      WTS Corals

    2. 0

      LEGITIMATE CRYPTOCURRENCY RECOVERY SERVICES /HIRE HACKER ZED NEMESIS

    3. 0

      14cm nice rbta

    4. 2

      Selling sps frags

    5. 0

      Wts easy sps frag x 2 for $20

×
×
  • Create New...