Jump to content

Need help with coral


Awjw
 Share

Recommended Posts

  • SRC Member

Hi seniors, pretty new to this hobby and need help and advice here.

Anyone can help with advising what could be wrong for my coral? Everything seems fine after I got it yesterday and when I got home today I saw this. :(

Realised my water temp went up to abt 31 degrees.

Rest of params are ok.

429370de1b83897850d0e57888dc78e2.jpg

Sent from Singapore Reef Club mobile app

Link to comment
Share on other sites

  • SRC Member

Thinking of that and trying to source for an affordable one here. :)

  On 5/31/2017 at 1:23 PM, ronnieloong said:
Same with my previous 45 x 45 tank at 29 deg. But the cheap zoas and normal gonio just can take it moderately. Got a second hand chiller from fellow Reefer.


Sent from Singapore Reef Club mobile app




Sent from Singapore Reef Club mobile app
Link to comment
Share on other sites

  • SRC Member
  • SRC Member
  On 5/31/2017 at 1:32 PM, ronnieloong said:

I'm using the same for my 45 x 45 tank as well. Works perfectly. But anyone can advice also for my cut in and cut out timing less than 10 min.


Sent from Singapore Reef Club mobile app

Expand  

What is you temperature setting and flow rate through the chiller?

Link to comment
Share on other sites

  • SRC Member
  On 5/31/2017 at 1:51 PM, ronnieloong said:

Temp set at 26 and pump flow rate is 600


Sent from Singapore Reef Club mobile app

Expand  

Did you measure the flow rate or are you assuming that you 600 lph pump is givin you that. All the hose and fittings and height difference from intake to discharge will add resistance to the flow and will lower the flow.

Link to comment
Share on other sites

  • SRC Member

Personal experience. It may be better to use an external probe to monitor and control the tempeature. As the probe will be monitoring the tank/sump tempetature this will give a more accurate feedback to the chiller to respond to the cooling requirement. I use a HS 28a for my 200+ litre system. Set the cut in at 26 and cut out at 25. Chiller will normally take about 1 hour to bring the temp down and cut out for about 2 hour before cutting in again. I use external temp probe.

Link to comment
Share on other sites

  • SRC Member

btw back to your question why the torch coral is doing badly. There may be other factors other than temperature. I find that if the LPS is from a fresh shipment it may not do well if we buy it immediately on the day of arrival. It is already stressed from the journey. So if it did not rest enough and we subject it to another trip to our home it may stress them further. So did you get yours from the lfs or from another reefer?

 

 

Link to comment
Share on other sites

  • SRC Member

I got it from a lfs.

  On 5/31/2017 at 2:19 PM, reefbuilder said:
btw back to your question why the torch coral is doing badly. There may be other factors other than temperature. I find that if the LPS is from a fresh shipment it may not do well if we buy it immediately on the day of arrival. It is already stressed from the journey. So if it did not rest enough and we subject it to another trip to our home it may stress them further. So did you get yours from the lfs or from another reefer?
 
 




Sent from Singapore Reef Club mobile app
Link to comment
Share on other sites

  • SRC Member

There are times I get an LPS from a fresh shipment that looks fine. But after a day in the tank it starts to die. When I cut it up it is already rotting from within. So I suspsect it is already stressed and dying when it arrived from overseas.

Link to comment
Share on other sites

  • SRC Member
  On 5/31/2017 at 2:12 PM, reefbuilder said:

Personal experience. It may be better to use an external probe to monitor and control the tempeature. As the probe will be monitoring the tank/sump tempetature this will give a more accurate feedback to the chiller to respond to the cooling requirement. I use a HS 28a for my 200+ litre system. Set the cut in at 26 and cut out at 25. Chiller will normally take about 1 hour to bring the temp down and cut out for about 2 hour before cutting in again. I use external temp probe.

Expand  

 

My cut in cut out is 27 and 26.  Thought you say

 

  On 5/31/2017 at 1:53 PM, reefbuilder said:

Well I have been running my tank at around 28 - 29 degrees and my LPS is all doing fine.

Expand  

 

Link to comment
Share on other sites

  • SRC Member
  On 5/31/2017 at 3:01 PM, kakak99 said:

 

My cut in cut out is 27 and 26.  Thought you say

 

 

Expand  

I have 5 tanks. two of them on chiller. The 28 - 29 degree  LPS tank do not have chiller. The one with chiller just started not long ago. Currently cycling will post some updates soon.

Link to comment
Share on other sites

  • SRC Member
  On 5/31/2017 at 2:12 PM, reefbuilder said:
Personal experience. It may be better to use an external probe to monitor and control the tempeature. As the probe will be monitoring the tank/sump tempetature this will give a more accurate feedback to the chiller to respond to the cooling requirement. I use a HS 28a for my 200+ litre system. Set the cut in at 26 and cut out at 25. Chiller will normally take about 1 hour to bring the temp down and cut out for about 2 hour before cutting in again. I use external temp probe.

Hi bro, any recommendation for the probe or where do you get it actually.


Sent from Singapore Reef Club mobile app
Link to comment
Share on other sites

  • SRC Member

I ordered one from Carousell but yet to try it out. Will update on the outcome if interested.

  On 6/3/2017 at 5:45 PM, ronnieloong said:

Hi bro, any recommendation for the probe or where do you get it actually.


Sent from Singapore Reef Club mobile app




Sent from Singapore Reef Club mobile app
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share



  • Join us on the largest Reefing community in Asia!

    Sign up and share your reefing journey with us, make friends and get helps from the community .

     

  • Topics

  • Latest Update

    1. 3

      **^$>: PrimeBiome Reviews - Prime Biome Gummies Review Ingredients, Side Effects, and Investigative Report

    2. 3

       ++ Prime Biome Reviews (ALERT):@~ I TRIED IT, Tracked It, and Exposed the Good, Bad & Unexpected

    3. 5

      ~+@ Prime Biome Reviews: (We Tried It 90) My Honest Review 2025!

    4. 0

      Authentic 'Uzbekistan' Temu Promo Code ✓- UZS 1,150,000 off-✓ -⁆↪- -acj796620-]] for New And Existing Customers

×
×
  • Create New...