Jump to content

My Slice of Nature (Part 3)


SubzeroLT

Recommended Posts

  • SRC Supporter

Some have asked about Nyos Bio Booster. Its a somewhat convenient all in one product that includes 'carbon dosing' + amino acids + vitamins.

1461139501_P5111153(Medium).thumb.jpg.5b50a9c674ca245b3e2cc929bb8ac9a6.jpg

Using it the past year with pretty good results. Based on my limited layman understanding, this is what I make out of what's stated on the brochure & what it actually does.

  • Carbon dosing boosts specific beneficial bacteria population which reduces nitrate/phosphates.
  • The resulting increased biomass is also used by corals as particulate nutrition.
  • And it also contains a blend of amino acids & other ingredients to improve growth & colors.

Definition of biomass : plant or animal material that can be used for energy production

Definition of particulate matter : microscopic particles of solid/liquid matter suspended in water

 

 

 

  • Like 1

Facebook : https://www.facebook.com/mysliceofnature/

 

 

 

 

 

Link to comment
Share on other sites

  • SRC Supporter

@ David

This is how to better control the amount of pellets the auto feeder dispenses. By using a larger slot + add a bit of tape to dial it down a little.

1466084707_20200513_005645349_iOS(Medium).thumb.jpg.7be1e70fc4b0fe3f57e72e22122c62ac.jpg

 

2040625204_20200513_003937723_iOS(Medium).thumb.jpg.2b5280f0d465bfe0eab6b44cd47add45.jpg

  • Like 1
  • Thanks 1

Facebook : https://www.facebook.com/mysliceofnature/

 

 

 

 

 

Link to comment
Share on other sites

  • SRC Supporter

Got an AquaUV 57w UV sterilizer from RMS not long ago. Main purpose is not to reduce risks related to protozoa (ich) & algae. But more for ridding accumulated toxins in an enclosed reef tank. These toxins come from zoanthids, chemical warfare between corals in close proximity, bioaccumulation from the self prepared fresh fish/prawn meat, aerosols from the air etc. Just worried about long term effects.

According to the specs, the AquaUV unit is suitable for tanks up to 1300L. And capable of achieving 90,000 uw/cm2 with water flow rate of 4000l/hr.  At these specs, the AquaUV is easily capable to eradicate protozoa when it passes through the filter.

uw (micro watts) /cm2 is a measure of energy intensity.  For reference, the killing dose of UV [uw/cm2]. 

  • Bacteria = 15,000 — 30,000
  • Algae = 22,000 — 30,000
  • Protozoa = 90,000

 

Some pics :

Printed some brackets to hold the UV unit

1982169279_P4150705(Medium).thumb.jpg.6bb8c368f7f0f9f596aa5022d8c27846.jpg

 

Printed a power supply bracket. Made a small slot on the lower bracket for easy PSU removal.

1669455707_P4160712(Medium).thumb.jpg.9290882129a864b1652e8daf42744084.jpg

841173363_P4160713(Medium).thumb.jpg.867b166140f8afa49377497c3373c43d.jpg

 

Reinforcement tubes used at places where the hoses may kink (and restrict the flow rate).

1499479928_P4150707a(Medium).thumb.jpg.f8302048b4828b67cb841f94f98cd1a6.jpg

 

In my set up, water is fed by an Ecotech Vectra S1. Water flow rate to the AquaUV is estimated ~ 2500L/hr (rough visual guess. I don't have a flow meter).

1365431889_20200415_030101724_iOSa(Medium).thumb.jpg.547ae57196dd661cfb6e1d9a7ca1f851.jpg

 

Outlet water pipe exits the AquaUV, right in front of one of the return pump via this tube adapter. The plan is the suction from the return pump pulls all the 'clean' water goes back to the display tank. Hence, an estimated 40% of the total water flow to the display tank is sterilized. I think this is good enough.

362912779_TubeadapterUV.thumb.JPG.03a1ae59a53018ccfa87691985a6d9a1.JPG
 

 

UV lighting schedule. Not switched on 24/7 at this point. Plan to increase UV hours progressively.

Black = Off. Blue = On

651021177_apexUVschedule1.thumb.JPG.ae28e1824eb69cfe8aa6eaf939cb43df.JPG

 

Amateur Apex programming below :(     Keen to get suggestions.

1204088604_UVApexprogramming.JPG.25b5a70788ad6fa8be6306c3daff72dc.JPG

  • Like 2

Facebook : https://www.facebook.com/mysliceofnature/

 

 

 

 

 

Link to comment
Share on other sites

  • SRC Supporter

Been working on optimizing 'flow efficiency'. There are 3 pumps in the return section of the sump. 2 return pump + 1 smaller Vectra S1 pump that supplies water to all the reactors (eg. UV, sulfur, rowaphos)

 

 

Ideally all the filtered/clean water should return directly to the display tank & not get recirculated back through the reactor again. This is the same issue/challenge for reefers who pump water to a chiller and return the water back to the sump instead of directly to the display tank.

 

I made a better tube adapter recently that clamps to the return pump (left). It holds the tubes from the reactor just in front of the return pump inlet.

.2109652482_P5150610(Small).jpg.3b420860ab3e5233c9971ba82c7b2bed.jpg

 

This right adapter clips onto the Phosban 150 reactor body & lid. And a funnel in the base that links to a PVC hose that leads to the return pump.

Left Small hose = Sulfur reactor 

Left Large tube = UV sterilizer 

Right hose = Rowaphos reactor 

 

592794356_20200515_034831486_iOS(Medium).thumb.jpg.408949a851b052d4dac2b89852d528af.jpg

 

 

 

 

Facebook : https://www.facebook.com/mysliceofnature/

 

 

 

 

 

Link to comment
Share on other sites

  • SRC Supporter

Currently the Kalk stirrer is hooked to the Apex & switches ON for 2min. Once every hour. Quite a waste to use the Apex for this simple purpose. 

Tried using one of those standard smart wifi power plugs. But those only allow a max of about 16 events (i.e. 8x on + 8x off) This is not enough for the kalk stirrer. 

 

Objective of this mini project was to free up one plug on the Apex so it can be put into better close loop control of equipment (instead of just using as a standard timer)

  • Using an FRM01 timer board.
  • Set to Function 5
  • T1 = 2min, T2 = 60min
  • The trigger button is added to manually trigger the stirrer to switch on.
  • Case part is printed. Box is mounted to a 'dry' section of the cabinet.

536440965_20200519_123716343_iOS(Medium).thumb.jpg.139c50303c12ea1c8328e389a9b5447d.jpg

 

2040214261_P5201521(Medium).thumb.jpg.3fdacf225c3b3478d5a43a10b9a2c078.jpg

 

  • Like 4

Facebook : https://www.facebook.com/mysliceofnature/

 

 

 

 

 

Link to comment
Share on other sites

  • SRC Supporter

Water change day.

1852589345_20200525_033631564_iOS(Medium).thumb.jpg.d829137423abdaf67c3f2dfb929e6a3c.jpg

 

Starlight blenny & mandarin dragonet rushing to the isolation box (usually straddled across the brace) as its full of algae & pods

553632808_20200525_034905111_iOS(Medium).thumb.jpg.82eff97027ce3bee0e83d06304864655.jpg

 

Time to clear the algae in the refugium

409711822_20200525_040735286_iOS(Medium).thumb.jpg.7f4bb0b89cedd0b3b94dd602b2897d38.jpg

 

The Clarisea filter can still last a few weeks. (1 month 20 days so far)

2117370625_20200525_030802294_iOS(Medium).thumb.jpg.0eaf009dd2cd4b058582018771f6f285.jpg

 

Some random coral pics from the weekend.

Noticed that duncans don't sting other corals (at least not the forest fire digi)

1205003169_P5231528(Medium).thumb.jpg.ac0dd5d87c9510cd04bb66c190d8266d.jpg

 

Possibly time to move the valida coral :(

2143944124_P5231555(Medium).thumb.jpg.46c508f47ba445b0386b961e08e299cb.jpg

 

Moved this to a high light area

1392503984_P5231544(Medium).thumb.jpg.f6e482e747b2951e7166752f3aa86e14.jpg

 

Croc Island Scolly sprouting another baby head

2044711033_P5231549(Medium).thumb.jpg.c012e00bb627cbcd60fc0e1a2295f334.jpg

 

Total 3 additional heads since getting it in Jan 2019

1575876766_P5231548(Medium).thumb.jpg.2b6963da83b69349e3195b674ca4d075.jpg

 

  • Like 1

Facebook : https://www.facebook.com/mysliceofnature/

 

 

 

 

 

Link to comment
Share on other sites

  • SRC Supporter

Gentle reminder to check pump volumes on a regular basis. Especially for the smaller dosing pumps (eg Kamoer, Coralbox, Jebao dosers). Small errors will add up to cause problems over time. 

Here i'm testing the Versa pump accuracy. Still accurate & loving it.

713172796_20200528_021442474_iOS(Medium).thumb.jpg.40108a513adebc41ed8801416fdc7d2e.jpg

 

Tank has been quite stable with the Versa pushing 2.2L of kalk daily.

Alkatronic is doing 4 tests per day (6hrs apart). pH is doing OK considering this is an indoor tank with cabinet around the sump.

 

266402802_Alka1(Medium).thumb.jpg.22f32ca9e0a1d2ec1a9f737ba58e837d.jpg

 

Not too happy with the sulfur reactor water flow consistency. A Versa pump for this purpose would be ideal.

Note ORP shown on the Sulfur chart is actually reversed ORP (i.e. negative values)

Apex.thumb.JPG.fd9a1edf756fa7f6bb7f3e487bb62322.JPG

Some folks asked how i keep my big 3 water parameters stable. In reality, it is not that stable. Ca, Mg, KH is consumed at different rates. Sometimes consumption is higher on days when trace elements are added. Sometimes, the calcium reactor pH drifts a little (bubble count related?) and the concentration of the effluent changes. 

Ca & Mg is measured weekly & may end up lower than targeted (eg. Ca @ 380ppm  instead of 420ppm target or Mg @ 1350ppm instead of 1450ppm target). This is then corrected manually by mixing Ca/Mg powder & dripped in manually.

 

 

Facebook : https://www.facebook.com/mysliceofnature/

 

 

 

 

 

Link to comment
Share on other sites

  • SRC Supporter

Sometimes its hard to frag zoa when they grow on rocks.

 

3D printed a simple 'connected' frag plate where the tabs are easy to cut with a knife. Makes more sense for zoa than stony corals.

352467739_20200603_132650591_iOS(Medium).thumb.jpg.24d1ce9aaa9edd587d431df1ea648337.jpg

 

A frag of zoa

216281096_20200604_103206149_iOS(Medium).thumb.jpg.a6ce6b295d76defc7d5b96dc11311b55.jpg

 

Stuck the chalice on anyway

1635193827_20200604_102811474_iOS(Medium).thumb.jpg.967137f36b1204dc95905920bf821f18.jpg

 

Close up of the bottom

638783634_20200604_102823154_iOS(Medium).thumb.jpg.bdc345a5ecfb10b7de660ab6f757df65.jpg

  • Like 1

Facebook : https://www.facebook.com/mysliceofnature/

 

 

 

 

 

Link to comment
Share on other sites

  • SRC Supporter

Tops down iPhone pics

2144464503_20200606_102349286_iOS-1(Medium).thumb.jpg.146488a9432e50d23b792725d4a388aa.jpg

 

1552016210_20200606_102331421_iOS(Medium).thumb.jpg.75f2b9392254c6f55c36cb3a724590c7.jpg

 

496523742_20200606_125423111_iOS(Medium).thumb.jpg.6c26269f12ed7dc06cb9bd52648b932e.jpg

 

710212902_20200606_102454724_iOS(Medium).thumb.jpg.51e076223ddc569752ad26b0d37f6c15.jpg

 

This purplish candy cane is changing color under very high light.

370809166_20200606_125407949_iOS(Medium).thumb.jpg.1cc1d507c21dfc1fcb1f73b6f682e659.jpg

 

Top up CR today.

1691792946_20200606_105543311_iOS(Medium).thumb.jpg.55efe1bd2a398625ff637c9c8b9dc66f.jpg

  • Like 1

Facebook : https://www.facebook.com/mysliceofnature/

 

 

 

 

 

Link to comment
Share on other sites

well it took a fair while to read the thread but it was well worth it, thankyou leon. your mythodical approach to husbandry shows what can be achieved if your repared to do the work and spend the money. i picked up heaps of great tips which i intend to use. thanks again  john

Link to comment
Share on other sites

  • SRC Supporter
2 hours ago, shnapper20 said:

well it took a fair while to read the thread but it was well worth it, thankyou leon. your mythodical approach to husbandry shows what can be achieved if your repared to do the work and spend the money. i picked up heaps of great tips which i intend to use. thanks again  john

Thanks :) 

 

 

Facebook : https://www.facebook.com/mysliceofnature/

 

 

 

 

 

Link to comment
Share on other sites

page 5 your using seachem denitrate reactors, page 30 your installing a biopellet reactor and I think somewhere there was a pic where the apex was monitoring sulfur, which would imply a sulfur reactor. So what  are you using ? which was better? I used a biopellet reactor for years which worked well so long as I checked for blockages , pump failure and medium level. If any of the fore mentioned occurred it set it back weeks to get it back to where it was.

  • Like 1
Link to comment
Share on other sites

  • SRC Supporter
3 hours ago, shnapper20 said:

hi on page 34 you show your running rowaphos through the Nyos Torq, yet on page 36 you you show you are using  a two little fishes reactor .  so is there a reason for this?

The Nyos Torq reactor works very well. The media fluidizing capability is amazing, allowing good contact time & able to control phosphates quickly.

I placed it in the compartment between skimmer & return section (that's the only space available)

1659932745_P1011307(Small).jpg.783c14d196488483d01c1dd878f9029e.jpg

 

At the same time, my tank's pH was quite low ~ 7.8. Partially contributed by the high effluent rate from the calcium reactor (~ 140ml/min).

A 'refugium' box growing algae is supposed to help take up some of the CO2. Hence it became a choice point to sacrifice the Nyos Torq in place of a box to take up CO2 laden water.

Pic below shows the Prime fuge light + acrylic box straddling on top of the media section.

1886433698_20200609_012716606_iOS(Medium).thumb.jpg.50bf2bffa1fec6aff2e95536689edcca.jpg1200299772_20200609_012706545_iOS(Medium).thumb.jpg.57ecd73aa898db68d4f6705e5817be2b.jpg

 

Since the rowa is still needed, its now running using a TLF Phosban 150 reactor. Its clearly less effective compared to a Nyos Torq for this tank size.

 

 

 

 

 

Facebook : https://www.facebook.com/mysliceofnature/

 

 

 

 

 

Link to comment
Share on other sites

  • SRC Supporter
10 hours ago, shnapper20 said:

page 5 your using seachem denitrate reactors, page 30 your installing a biopellet reactor and I think somewhere there was a pic where the apex was monitoring sulfur, which would imply a sulfur reactor. So what  are you using ? which was better? I used a biopellet reactor for years which worked well so long as I checked for blockages , pump failure and medium level. If any of the fore mentioned occurred it set it back weeks to get it back to where it was.

Seachem denitrate works. Inlet water can be 10ppm nitrate. Output water can be 0.5ppm nitrate (or even 0ppm). However it dripped at a slow rate @ 1 drop per second. For a 850L tank, this drip rate is not effective enough in the whole scheme of things.

 

I later switch to biopellet reactor which is basically carbon dosing. It is effective but has its issues :

  • For the amount of media used (~700ml), it needed very very high flow rate through the fluidized reactor (possibly 2000L/hr) to prevent the biopellets from clumping
  • Biopellet water is fed directly into the skimmer for it to take away the excess slime. However its very likely that not all the slime is removed by the skimmer
  • Was using NP biopellet (not cheap @ $100 per liter). It depletes quite fast and expect to use about 2 bags per year.
  • Some cyano bacteria appeared in low flow areas of the display tank after about 2 months. Hence the decision to take it down.

 

After removing the biopellet reactor, nitrates shot up to the 25ppm levels.

I'm currently using a sulfur reactor. It has its set up challenges but feel its the best choice made so far and will likely use this long term.

Pros :

  • Media will last for many years. Just set it up & leave it.
  • Despite quite heavy daily feeding. Tank nitrate level is about 2.5ppm. Good enough. I think a larger reactor is needed if there is a need to reduce further.

Cons

  • The sulfur reactor tends to clog very easily because the effluent flow isn't high. It has a lot of slime that will even clog a 6mm hose.
  • Due to the regular clogging, I rely on the ORP meter/Apex to monitor.  Next steps could be to use a Versa peristaltic pump. That should resolve the clogging issue entirely.
  • Initial set up is more expensive - recirculating reactor like a calcium reactor, ORP meter/controller

 

 

 

Facebook : https://www.facebook.com/mysliceofnature/

 

 

 

 

 

Link to comment
Share on other sites

  • SRC Supporter
39 minutes ago, fatphotoboy said:

Able to advice where you got those sulphur media? It's not being sold at most shop. Thanks in advance.

Sent from my ELS-NX9 using Tapatalk
 

You can find sulfur media from Aquamarin (Skimz brand). In the past, I also got it from DE Aquatic (Caribsea brand)

  • Like 1

Facebook : https://www.facebook.com/mysliceofnature/

 

 

 

 

 

Link to comment
Share on other sites

  • SRC Member
You can find sulfur media from Aquamarin (Skimz brand). In the past, I also got it from DE Aquatic (Caribsea brand)
Thanks for the information sharing.

Sent from my ELS-NX9 using Tapatalk

Link to comment
Share on other sites

On 9/5/2016 at 1:15 AM, SubzeroLT said:

Did the usual process of cleaning the rocks

Bleach, soak, scrub the rocks for a day or so :

P7060876 (Large).jpg

 

Then rinse with tap water / anti chlorine a couple of time. Having a large open bucket like this 120L one from ikea is great

P7170890 (Large).jpg

 

Having some water movement should improve the efficiency to remove the bleach. Soaked the rocks in tap water for a few days.

IMG_9709 (Large).jpg

 

Let the rocks dry, then vinegar soak for 15min. 

P7270907 (Large).jpg

 

 

just curious why did you soak in vinegar?

Link to comment
Share on other sites

  • SRC Supporter
32 minutes ago, shnapper20 said:

just curious why did you soak in vinegar?

These are rocks given by fellow reefers. Were in very bad dirty state.

Soaking in vinegar is supposed to melt away some of the dirty surface, resulting in less organics waste when setting the tank. i.e.attempting to start with a clean slate. Below is a screen shot from BRSTV.

1892967126_Benefitofusingacid.thumb.JPG.c3459e205260e73037561df655b210dc.JPG

 

 

 

Facebook : https://www.facebook.com/mysliceofnature/

 

 

 

 

 

Link to comment
Share on other sites

  • SRC Supporter

Making a larger ring for the chalice frag.

 

Printed it out of ABS material.

15278566_20200607_100530410_iOS(Medium).thumb.jpg.23164e0fbdc93a4db13daab2b98d18c8.jpg

 

All done.

159660099_20200613_092023311_iOS(Medium).thumb.jpg.b3ea7bbcd33a3c95565f9fe27acb9496.jpg

 

Chalice removed from tank

926276563_20200613_092438183_iOS(Medium).thumb.jpg.e3e5706b2c0fba3f14ee7f9084f04837.jpg

 

Underside of the frag. This is the 3rd extension.

A mess of material used. But i just print with whatever ABS is loaded.

561600122_20200613_092627988_iOS(Medium).thumb.jpg.42724751d3fe5b32b4242b10261746e6.jpg

 

761290766_20200613_092809187_iOS(Medium).thumb.jpg.df1b5b8120ab02bb012197ff6fcc5162.jpg

 

Back in the tank within 2 min

1281778192_20200613_093308770_iOS-1(Medium).thumb.jpg.e6111bec4c0ed5e4cd53802fca523575.jpg

  • Like 1

Facebook : https://www.facebook.com/mysliceofnature/

 

 

 

 

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




  • Join us on the largest Reefing community in Asia!

    Sign up and share your reefing journey with us, make friends and get helps from the community .

     

  • Topics

  • Latest Update

    1. 0

      加拿大保录取_SFU毕业证成绩单——Q微信751558146西蒙菲莎大学学位证_成绩单_办理SFU文凭学历认证Simon Fraser University

    2. 0

      美国学位证_Brandeis毕业证成绩单+Q微信751558146布兰迪斯大学学位证_成绩单_办理Brandeis文凭学历认证Brandeis University

    3. 0

      加拿大保录取_UBC毕业证成绩单——Q微信751558146英属哥伦比亚大学学位证_成绩单_办理UBC文凭学历认证University of British Columbia

    4. 0

      美国学位证_PSU毕业证成绩单+Q微信751558146宾州州立大学学位证_成绩单_办理PSU文凭学历认证Penn State University Park

×
×
  • Create New...