3ft setup, help needed

[Soleh Joe]

I'm making a low-profile tank. 3ftx1.5wx1ft h. Sump 2ft. Thought of going from return pump to hailea hs28a then go up back to main tank. What pump do you guys suggest? Ltr/hr.

[iceman]

35 minutes ago, Soleh Joe said:

I'm making a low-profile tank. 3ftx1.5wx1ft h. Sump 2ft. Thought of going from return pump to hailea hs28a then go up back to main tank. What pump do you guys suggest? Ltr/hr.

The tank size is same as mine. I'm using Ecotech Vectra M1. 

I make a manifold to tee off to chiller and 1 spare for reactor.

I only tee off to 2 outlet, u can add more if u need. 

This way u can cut down lots of Plug. 

 

[Soleh Joe]

@iceman thanks.. anyway your pump return goes to chiller inlet via a t-joint and your chiller outlet goes direct back to main tank? Dont mind sharing your display tank photo.

[iceman]

Yes, back to Display. 

 

[Soleh Joe]

@iceman thanks.. very nice.. but the way i see pump outlet goes 2 ways, 1 is to chiller inlet the other 1 to display tank return.?

[iceman]

Here's a better pic of the setup. Longer one is the return and shorter is from the chiller.

 

[iceman]

Here the set up of the manifold. 

 

[Soleh Joe]

@iceman thank you for the effort in showing very details photo of your set up. Cause i was thinking of doing from pump outlet to chiller inlet then chiller outlet goes back to display tank. As my overflow sump is something similar to this picture.

Edited August 6, 2016 by Soleh Joe
Photo

[Soleh Joe]

Since nobody did a review on Yong hua aka Ah soon. For me workmanship 9/10 and very friendly and makes alot of effort to custom your needs.