3ft shallow reefs ocean

[Kelvin Ang]

Very nice setup bro. Glad to see another zeovit user! Good thing is Zeovit much more accessible and readily available now adays.

Heres my suggestions, like HM mentioned, u need to do a large water change to bring the CA and Alk up.

Alternatively, u can dose premixed CA and Alk directly into the tank, do a slow drip method over a couple of days. I used to use this brand called ESV B-ionic 2 part. Its the best remedy to bring your ca and alk back to where u want it, followed by tuning your CR to maintain the ideal parameters. This method will be your best friend when it comes to using a CR. 

Personally, I'll hold off adding any new sps for now, until you get ur parameters in placed. Because u dont want to get disheartened when u start seeing corals stn/rtn. Its a painful learning process, which hopefully you wont go through. 

Your light set seems a bit small in length, and I understand you are looking for a shallow tank set up. My advise is maybe u can lower the light set slightly more. This will get u additional PAR since your scape is rather low. Put the high light demanding corals i.e Majority SPS, centralised in the tank, with the less demanding corals around it i.e LPS , Birdnest, digitata etc. Futher down the road, you can consider supplementing with leds, The AI prime looks like it can easily be customised to fit onto the T5, 2 x AI prime will be sweet. But that can come later. 

Stick with the basic 4 for now, or if u really wan, u can start dosing Amino Acids and Coral vitaliser (no po4). 

Whatever you decide to dose, dose in small quantities and observe a few days. Thats the best way to go about with zeovit. 

Enjoy ur tank!

Thx you zeovit shifu . I will do small dosing and use the basic 4 till I hit UNLS for the water .

Sent from my SM-N920I using Tapatalk

[Kelvin Ang]

Very nice setup bro. Glad to see another zeovit user! Good thing is Zeovit much more accessible and readily available now adays.

Heres my suggestions, like HM mentioned, u need to do a large water change to bring the CA and Alk up.

Alternatively, u can dose premixed CA and Alk directly into the tank, do a slow drip method over a couple of days. I used to use this brand called ESV B-ionic 2 part. Its the best remedy to bring your ca and alk back to where u want it, followed by tuning your CR to maintain the ideal parameters. This method will be your best friend when it comes to using a CR. 

Personally, I'll hold off adding any new sps for now, until you get ur parameters in placed. Because u dont want to get disheartened when u start seeing corals stn/rtn. Its a painful learning process, which hopefully you wont go through. 

Your light set seems a bit small in length, and I understand you are looking for a shallow tank set up. My advise is maybe u can lower the light set slightly more. This will get u additional PAR since your scape is rather low. Put the high light demanding corals i.e Majority SPS, centralised in the tank, with the less demanding corals around it i.e LPS , Birdnest, digitata etc. Futher down the road, you can consider supplementing with leds, The AI prime looks like it can easily be customised to fit onto the T5, 2 x AI prime will be sweet. But that can come later. 

Stick with the basic 4 for now, or if u really wan, u can start dosing Amino Acids and Coral vitaliser (no po4). 

Whatever you decide to dose, dose in small quantities and observe a few days. Thats the best way to go about with zeovit. 

Enjoy ur tank!

Yes shifu I will take noted .now I'm making it to UNSL 1st before adding any new sps . So I think it's about 6month to 1 year before I can add any new sps .

Sent from my SM-N920I using Tapatalk

[Kelvin Ang]

New update .

Due to lag time of caring about my own tank . My tank now kana ich & total fish die is Picasso clown die and flame angelfish and bitter tang and platinum clown and coral beauty.

Tonight I will use the polylab medic to kill the ich in my tank . Hope everything will goes well after 10days of medic dosing .

Sent from my SM-N920I using Tapatalk

[Kelvin Ang]

Some updates after so long
All fishes is dead due to heavy ich .
Then all sps RTN due to super high po4 and no time to clean my tank .....



Today just got time and redo my tank abit and install some new item .

1st Clear away the sand and become sandless
2nd clean my sump
3rd install ecotech hanging kit for my mp10 controller.

Next plan thinking of putting a algea scrubber in sump area . And top up some new sps frag .




Sent from my SM-N920I using Tapatalk

[Kelvin Ang]

Adding some update today .

Ehim pump 1626 for chiller is spoilt so I need to change a new aqua engine in for my chiller and do some setting in my sump area to make it nice and clean .


Added a new Rock in and added some new sps in frag in .



Sent from my SM-N920I using Tapatalk

[Kelvin Ang]

Just reshaping the rocks again hope this time will look better abit and add a gift from a friend .

Sent from my SM-N920I using Tapatalk

[Kelvin Ang]

I need some help to Id this monti . I not sure is it a bubble gum monti anot ?

Sent from my SM-N920I using Tapatalk

[Zest2night]

Nice

Sent from Singapore Reef Club mobile app

[Kelvin Ang]

Update
Today start my new colour program for my sps with aqua forest full colour elements.
Let's see after 2 months .
I will continue dosing zeovit system plus aqua forest colour elements.



Sent from my SM-N920I using Tapatalk

[Kelvin Ang]

Laying on my sofa and watch my tank .
Everything so blue


Sent from my SM-N920I using Tapatalk

[quarantasei]

Maybe you want to go easy on the dosing in this early stage as your coral cast is still very small and those frags don't look like the very demanding type. Good luck bro


Sent from my iPhone using Tapatalk

[Kelvin Ang]

Thx bro .

Sent from my SM-N920I using Tapatalk

[vincentwangz]

Nice Barebottom tank bro!


Sofishticated Friend

[Kelvin Ang]

Nice Barebottom tank bro!


Sofishticated Friend

Thx u bro . I'm still slowly adding coral

Sent from my SM-N920I using Tapatalk