Jump to content

My Slice of Nature (Part 2)


SubzeroLT
 Share

Recommended Posts

Thanks.

Think the coloration is probably due to high nitrates the past weeks for 2 reasons

1) Skimmer wasn't running properly & not able to skim anything out. Nitrates creeped up to about 5ppm

2) I've also stopped the sulfur reactor as it was pulling the pH down to around 7.7pH. I'm now relying on Microbacter7 + Biofuel at the moment.

I discovered it too that the purple valida turning full purple is a good indication that the nutrient is high in the tank

Maybe not that bad after all haha..

Sent from my SM-N920I using Tapatalk

Link to comment
Share on other sites

  • SRC Supporter

Silly tail spot goby insists on hanging around the wavemaker.

P3050649.jpg

 

Sharing some macro shots taken this afternoon :

Forest Fire :

P3050524.jpg

 

Trochus snail :

P3050517.jpg

 

P3050419.jpg

 

Mushroom surface

P3050412.jpg

 

Purple Valida

P3050283.jpg

 

Dino Monti

P3050209.jpg

 

Green stag

P3050212.jpg

 

Blue Monti

P3050350.jpg

 

Turquoise Birdsnest

P3050391.jpg

 

 

Facebook : https://www.facebook.com/mysliceofnature/

 

 

 

 

 

Link to comment
Share on other sites

  • SRC Supporter

Backup power supply for wave maker

P2231445.jpg

 

And iSocket device - to send an SMS text message when it detects a power failure.

P2231440.jpg

 

Product review here - http://www.sgreefclub.com/forum/topic/140104-power-failure-contingency-ecotech-battery-backup-isocket/

 

 

Facebook : https://www.facebook.com/mysliceofnature/

 

 

 

 

 

Link to comment
Share on other sites

  • SRC Supporter

How long have you kept the porcelain crab? I find it always hard to keep it alive as it only feed on micro organism in the water.

 

Sent from my SM-N920I using Tapatalk

 

 

I've had it since March 2015. So that's about 1 year so far.

Mine grabs bits of mysis shrimp or market prawns from the anemone as well.

Edited by SubzeroLT

Facebook : https://www.facebook.com/mysliceofnature/

 

 

 

 

 

Link to comment
Share on other sites

  • SRC Supporter

New addition - male Blue Star Leopard Wrasse.  

P3111683.jpg

 

Replaced the return pump & really impressed with the Vectra M1. Its rated at 7500l/hr / 80W.  Not surprisingly, it pushes more water than my previous Jebao DC12000 / 85W. The return flow is fantastic now.

P3121729.jpg

 

 

 

  • Like 1

Facebook : https://www.facebook.com/mysliceofnature/

 

 

 

 

 

Link to comment
Share on other sites

  • SRC Member

New addition - male Blue Star Leopard Wrasse.  

P3111683.jpg

 

Replaced the return pump & really impressed with the Vectra M1. Its rated at 7500l/hr / 80W.  Not surprisingly, it pushes more water than my previous Jebao DC12000 / 85W. The return flow is fantastic now.

P3121729.jpg

 

 

 

can PM the prize of ve

Link to comment
Share on other sites

  • SRC Member

Thank you for the documenting your Slice of Nature..being a newbie in this marine hobby, guess i need more and much much more read up. Its more complex than I thought it has always been. 

Link to comment
Share on other sites

  • SRC Supporter

Thank you for the documenting your Slice of Nature..being a newbie in this marine hobby, guess i need more and much much more read up. Its more complex than I thought it has always been. 

Thanks. I'm relatively new to the hobby & learning as well along the way. 

Facebook : https://www.facebook.com/mysliceofnature/

 

 

 

 

 

Link to comment
Share on other sites

  • SRC Supporter

Sharing some mistakes made along the way.

 

Previously, I shared that a fellow reefer gave me a frag which colored up nicely. From this 

PC260806.jpg

Colored up nicely to this 

P1151059_1.jpg

 

My recirculating sulphur reactor's pump wasn't working very well & needed to be sent back. Started having cyano in the display tank. I read about how effecting algae scrubbers are in reducing nutrients.  In any case, I ran the algae scrubber 24/7 on 21w red LED in parallel to a partially working nitrate reactor.

IMG_4928.jpg

 

The scrubber worked well, perhaps too well. Within 2 weeks, there was green algae growing in the scrubber. Then on the 3rd week, i noticed that most corals started to get pale & some started to peel. Here is what the same frag looked like on week 3 :( 

IMG_5961.jpg

 

Initially i thought the light was too strong & reduced it. That was a mistake. It just continued to decline. 

Nitrates were usually running in the 2-5ppm range suddenly climbed to 10ppm. Phosphate undetectable on Salifert kits. 

Figured that phosphates must have been running way too low. Stopped the scrubber & the peeling stopped. Its been 2 months since & everything is recovering well.

P3010236_1.jpg

 

For me, the lesson here is not to get over zealous on reducing nitrates/phosphates/algae, whether its using an algae scrubber, carbon dosing or using phosphate binders. Watch the dosage & rate of reduction.

In the case above, perhaps nitrates increased because of the redfield ratio - There was insufficient phosphate for nitrates be reduced. 

At times, coral colors/peeling is not about light levels but about providing the right & balanced nutrient levels.

 

 

Edited by SubzeroLT

Facebook : https://www.facebook.com/mysliceofnature/

 

 

 

 

 

Link to comment
Share on other sites

  • SRC Member

Hi, I experienced such peeling before too, this is considered STN I suppose? Great to head that yours recovered, mine continued to deteriorate where the white areas spread. :(

for yours, you just stabilized your nitrate levels & they grew back over the white areas?

Link to comment
Share on other sites

  • SRC Supporter

Yes, it grew back over the white areas. I dosed more amino acids during the recovery phase. 

I believe it wasn't so much of high nitrates but rather too low phosphates till the zooxanthellae starved & coral tissue died. This could explain the 'burnt tips' & loss of coloration. 

The high nitrates was because of too low phosphate/phosphorous (limiting nutrient). I fed more & stopped the algae scrubber ....and the nitrates came down on its own. Strange eh.

 

 

 

Edited by SubzeroLT

Facebook : https://www.facebook.com/mysliceofnature/

 

 

 

 

 

Link to comment
Share on other sites

  • SRC Member

Hmm mine was when I suddenly dropped my phosphates too, guess SPS don't really like that. Ok will try to dose amino acids too..

is it possible that when you fed more & stopped the scrubber, phosphates slowly came back up & that allowed nitrates to get reduced proportionately via the redfield ratio?

Link to comment
Share on other sites

  • SRC Supporter

I agreed as well that too low the nutrient level is not good for the coral as well esp if you keep lps.

I also encounter my purple valida which used to be deep purple Turing pale now when my nitrate drop to almost zero level. However some of the other oz sps is doing very well. Guess it is about finding the balance and correct nutrient level to suit our tank.

Sent from my SM-N920I using Tapatalk

Link to comment
Share on other sites

  • SRC Supporter

Inspired by an RODI auto cut off DIY done by fellow reefer Jowenteo....here is my version done the weekend.

- Float switch placed in RODI water collection tub. When the required water level is reached, it opens the circuit.

- Float switch then shuts off power to both the solenoid (for incoming water supply)  &  booster pump

 

NC (Normally Closed) solenoid valve. Placed between the tap & RODI unit

P3251746.jpg

 

Simple float valve mounted on an old Jebao wavemaker mount / magnet in the collection tub.

P3251741.jpg

Edited by SubzeroLT

Facebook : https://www.facebook.com/mysliceofnature/

 

 

 

 

 

Link to comment
Share on other sites

Porcelain crab molting

P3081474.jpg

 

Hermit crab digging deep into the duncan with its claws in search for food

P3091532.jpg

 

Love this photo! Hermit Caught in the act!

Follow Alex's Reefing Journey @ 

 

 


 

Link to comment
Share on other sites

  • SRC Supporter

Love this photo! Hermit Caught in the act!

 

I always impressed by you DIY and nice photo skills

 

Thanks :)

Edited by SubzeroLT

Facebook : https://www.facebook.com/mysliceofnature/

 

 

 

 

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share




  • Join us on the largest Reefing community in Asia!

    Sign up and share your reefing journey with us, make friends and get helps from the community .

     

  • Topics

  • Latest Update

    1. 0

      加拿大保录取_SFU毕业证成绩单——Q微信751558146西蒙菲莎大学学位证_成绩单_办理SFU文凭学历认证Simon Fraser University

    2. 0

      美国学位证_Brandeis毕业证成绩单+Q微信751558146布兰迪斯大学学位证_成绩单_办理Brandeis文凭学历认证Brandeis University

    3. 0

      加拿大保录取_UBC毕业证成绩单——Q微信751558146英属哥伦比亚大学学位证_成绩单_办理UBC文凭学历认证University of British Columbia

    4. 0

      美国学位证_PSU毕业证成绩单+Q微信751558146宾州州立大学学位证_成绩单_办理PSU文凭学历认证Penn State University Park

×
×
  • Create New...