Jump to content

A new relax view of my new cube


Kelvin Ang
 Share

Recommended Posts

  • SRC Member

Hi guys I'm from arowana hobbyist to a new reefer . Ok this half a year I'm been doing and making this new 2 feet cube setup .

2x2x2 cube tank plus sump

Cube tank and piping it's done by aquarium artist

Equipments

Lighting is radions xr30 led fully programme by ecotech helpline

Own DIY custom stand done myself

Wavemaker is 2 X RW4

Return pump using H20 ocean 5000

Dosing is jebao 4 channel dosing

I'm using red sea dosing band and contains A B C and D

Reactor is using phosban 150 with biopellets plus a Rio 1200lites pump

Skimmer using bubbles magnus C6 which a bit overkill

Chillers using hailea 28A

Carrebin Fiji live sand

Live rocks about 11 small rocks

Bateria is bio home plus . Planing to upgrade to marine pure blocks

Running on regfrium for cheatos

My salt is using DD H2O and maintained at 1.025

cycle water for 2 months then start on sps

Livestocks

2x fire gobys

1x blue doctor wasse

2x dotty back

1x by colour goby

1x algae Benny

2x sand goby

1x sand dollar

1x electric blue eye hermit crab

8x turbo snails

1x cleaner shrimp

Corals sps

Mostly it's starter sps and Montis

Now still manages the water until ready for nice sps .

Hope u guys like my simple setup . Cheers .

d0823826fd5397518bc14b8efe2d2b99.jpg6f996113c14fe1aef556b59ca3f24f6d.jpg2f16f3db8700186616d2b07427c30434.jpg8b1d687d65dfb570fde9652507cb65dc.jpg7c5e09b897ff84685f8489211c24eb69.jpgc2e7cd0b461ec2be99252ce959deb4e8.jpgb4418c430b7a92a2de0f925b44bbb4ee.jpg7832de3dc39c7da246749429f57f2d20.jpg573ddac7adc6a7ad1b658397017044b4.jpgf0499c92bd537cbc8870fc85f16b6677.jpg7059042e1d69760d88f9172dbdf04e67.jpg94ad30a2816b062c87a3aa76244730c1.jpgad322737c221adb438111ce05710952c.jpg58ebf4346a121bf2cac7f176bd285df0.jpg821e66aea2d680d52343acf4bd67ad7e.jpg8c463d82c4c47d8b214848fe0421d51e.jpg3af7aa4a2517e1ba212eca16121e095b.jpg2b3eff37a927cc533eeadbe3c8063127.jpg9248f16f887f07bc65d469e6026f6121.jpg141721cef1bb129279c086f2277e1690.jpg9049d8e0253bf6c1689d5457eb4c1f7d.jpgfa954401277058d4446ee4140db54fbf.jpg

  • Like 1
Link to comment
Share on other sites

  • SRC Member

Looking good.. are you going to add more live rock?

Yup I'm trying to find some Tonga rock to make it higher and wider in future as for now I need to save up some cash cause my CEO will nag me if I suddenly buy a lot of things . Lol
Link to comment
Share on other sites

  • SRC Supporter

Looking forward to updates. How come there are several tubes going into the filter sock?

Sent from my iPad using Tapatalk

Facebook : https://www.facebook.com/mysliceofnature/

 

 

 

 

 

Link to comment
Share on other sites

Ur skimmer seem to under skimming below the cup and not onto the inner flue of the skim cup. Try adjusting ur air intake to improve its efficiency.

Display Tank : 36" x 20" x 20" Herbie overflow box design, Sump : 36" x 21" x 17", Frag Tank : 16” x 20” x 16”, custom built by Tank Culture.

Lightings : Ecotech  Radion XR15 Pro x 2 for Main Display Tank, Inled R80 x 1 for Frag Tank.

Chiller : Dalkin 1hp compressor with build-in drop coil.

Skimmer : Skimz Octa SC205i Protein Skimmer.

FR : H2Ocean FMR75 Fluidised Media Reactor with Hailea HX-2500 (Feeder Pump) running Rowaphos.

CR : Skimz Monzter E Series CM122 Calcium Reactor.

BPR: Marine Source Biopellet  Reactor with Continuum Reef Biopellet Fuel. 

Main Return Pump : SICCE Syncra ADV 9.0 & Jebao ACQ-10000 Water Pump.

Wavemaker : Jebao MOW-9 x2 for Main Display Tank & Jebao SLW-20M  Sine Wave Pump for  Frag Tank.

Water Top Up: AutoAqua Smart ATO Lite.

Link to comment
Share on other sites

  • SRC Supporter

1st is return 2nd is chiller and 3rd is reactor .

Thought that most folks usually just have the return inlet into the filter sock (its dirty in there).

Chiller one is nearest the inlet of the return pump so it goes straight back to the tank (best efficiency)

Reactor outlet is usually placed near the skimmer (for re-circulation).

Putting the 'clean' water outlet from the chiller & reactor through the sock will 'dirty' it again.

Facebook : https://www.facebook.com/mysliceofnature/

 

 

 

 

 

Link to comment
Share on other sites

  • SRC Member

Thought that most folks usually just have the return inlet into the filter sock (its dirty in there).

Chiller one is nearest the inlet of the return pump so it goes straight back to the tank (best efficiency)

Reactor outlet is usually placed near the skimmer (for re-circulation).

Putting the 'clean' water outlet from the chiller & reactor through the sock will 'dirty' it again.

Yup but I every 3 day change the sock so no dirt will be in there . Hehe that's my trick
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share




  • Join us on the largest Reefing community in Asia!

    Sign up and share your reefing journey with us, make friends and get helps from the community .

     

  • Topics

  • Latest Update

    1. 2

      Wts: LA lakers & Hallucination zoas

    2. 2

      Equipments to sell

    3. 0

      WTS and FOC Tanks & Stuff

    4. 0

      WTS: Macro Rock scape

    5. 0

      FOC Coral Bandid Shrimp

×
×
  • Create New...