Jump to content

Advice on Tank Upgrade


Recommended Posts

Thanks bro Alexcyf..

Another question..when i move the live rock and media filter to the new tank..do I need to cycle the new tank again?

Yea, but must be fast, including the old water, but only if your water parameters, health of your old tank is good. If not then I suggest to start everything afresh!

Follow Alex's Reefing Journey @ 

 

 


 

Link to comment
Share on other sites

  • SRC Supporter

if you have the space, you can cycle some water with your media in a big bucket/container. so when your new tank arrives, just transfer them over. may help to reduce some cycling time but not recommended :)

[ ]

[ ]

Reef Reefing Reefed

Link to comment
Share on other sites

  • SRC Member

if you have the space, you can cycle some water with your media in a big bucket/container. so when your new tank arrives, just transfer them over. may help to reduce some cycling time but not recommended :)

Thanks bro for the advice.. Maybe I will go by cycling it for a week first..

See how it goes - not many livestock also at the moment...

Display Tank: 3x2x2 feet (12mm Crystal Glass)

Sump Tank: 2.5 feet with 4 compartments

"Reef Maniac - Ninja: Fish and Coral don't wait for you!"

Link to comment
Share on other sites

  • SRC Member

Anyway - about the lighting..

Any bro here can enlighten me between T5 and LED - how is the electricity consumption comparison, cost, etc..

My plan is will be LPS dominant with Goniopora, Hammer, Torch and Frogspawn..

I saw few articles that T5 is better - so thinking getting ATI 4X39w dimmable power module. Is it enough coverage?

If LED i think i will go for Maxspect Razor 180w...

Thanks bro!

Display Tank: 3x2x2 feet (12mm Crystal Glass)

Sump Tank: 2.5 feet with 4 compartments

"Reef Maniac - Ninja: Fish and Coral don't wait for you!"

Link to comment
Share on other sites

Performance will be subjective. Running cost, T5 will be higher in terms of electricity n tube replacement. For lps, maxspect razor is rather proven and able to bring out lps colour.

Tank : 4 X 2 X 2 with low iron front panel and external overflow

Skimmer : BK SM200 with waste collector

Return Pumps : Red Dragon 6m3 and Ehiem 1262

FR : 2 X Deltec 509 & powered by AB2000

Nitrate Filter : Deltec NF 509 and tee off from AB2000

Calcium R'tor : Deltec PF 501 with RM secondary chamber

Kalkwasser R'tor : Deltec KM500

Chiller : Pansonic 1 HP Compressor with 20m titanium Coil

Wave Makers : 4 X Tunze 6055 with 7096 & Vortec MP40w

Controller : GHL Profilux

Lighting : ATI Powermodule 10 or 8 tubes

Water Top-up : Water Top-Up tank powered by Tunze Osmolator

External Monitor : American Pinpoint pH and Temp. Monitor for main tank and GHL Profilux Controller to measure temp, pH, Redox

Ozonizer : Sander C50

UV : Corallife 6x

Algae Scrubbler

Link to comment
Share on other sites

  • SRC Member

Performance will be subjective. Running cost, T5 will be higher in terms of electricity n tube replacement. For lps, maxspect razor is rather proven and able to bring out lps colour.

Other than maxspect razor.. for 3 feet tank will 1 AI Hydra 52 or Radion XR30w pro enough? or i need 2 of those?

Thanks bro!

Display Tank: 3x2x2 feet (12mm Crystal Glass)

Sump Tank: 2.5 feet with 4 compartments

"Reef Maniac - Ninja: Fish and Coral don't wait for you!"

Link to comment
Share on other sites

Base on the spec, they only support 2ft. If u place high, possible but loose intensity and u might need long hook. Depending on yr scaping, u can consider getting one and supplement by t5(2tubes).

Tank : 4 X 2 X 2 with low iron front panel and external overflow

Skimmer : BK SM200 with waste collector

Return Pumps : Red Dragon 6m3 and Ehiem 1262

FR : 2 X Deltec 509 & powered by AB2000

Nitrate Filter : Deltec NF 509 and tee off from AB2000

Calcium R'tor : Deltec PF 501 with RM secondary chamber

Kalkwasser R'tor : Deltec KM500

Chiller : Pansonic 1 HP Compressor with 20m titanium Coil

Wave Makers : 4 X Tunze 6055 with 7096 & Vortec MP40w

Controller : GHL Profilux

Lighting : ATI Powermodule 10 or 8 tubes

Water Top-up : Water Top-Up tank powered by Tunze Osmolator

External Monitor : American Pinpoint pH and Temp. Monitor for main tank and GHL Profilux Controller to measure temp, pH, Redox

Ozonizer : Sander C50

UV : Corallife 6x

Algae Scrubbler

Link to comment
Share on other sites

  • SRC Supporter

usually when we use led we dont max its output at 100%.

however there are very few reefers who hangs their led high up and set a high output to maximize the value.

[ ]

[ ]

Reef Reefing Reefed

Link to comment
Share on other sites

  • SRC Member

Sigh.. but 2 AI will be cost a bomb..then in that case i will still go for razor or ATI sunpower dimmable 4x39w or 6x39w.. Tge ATI also looks good..

Display Tank: 3x2x2 feet (12mm Crystal Glass)

Sump Tank: 2.5 feet with 4 compartments

"Reef Maniac - Ninja: Fish and Coral don't wait for you!"

Link to comment
Share on other sites

Search, some led claim can support

Tank : 4 X 2 X 2 with low iron front panel and external overflow

Skimmer : BK SM200 with waste collector

Return Pumps : Red Dragon 6m3 and Ehiem 1262

FR : 2 X Deltec 509 & powered by AB2000

Nitrate Filter : Deltec NF 509 and tee off from AB2000

Calcium R'tor : Deltec PF 501 with RM secondary chamber

Kalkwasser R'tor : Deltec KM500

Chiller : Pansonic 1 HP Compressor with 20m titanium Coil

Wave Makers : 4 X Tunze 6055 with 7096 & Vortec MP40w

Controller : GHL Profilux

Lighting : ATI Powermodule 10 or 8 tubes

Water Top-up : Water Top-Up tank powered by Tunze Osmolator

External Monitor : American Pinpoint pH and Temp. Monitor for main tank and GHL Profilux Controller to measure temp, pH, Redox

Ozonizer : Sander C50

UV : Corallife 6x

Algae Scrubbler

Link to comment
Share on other sites

  • SRC Member

For 3ft tank, the recommendation is to get 2x Hydra 26 instead of 1x Hydra52.

This is to allow more spread.

2 Hydra 26 will be cost around $1,4xx is it? anyone can share the price of Hydra 26?

Thanks!

Display Tank: 3x2x2 feet (12mm Crystal Glass)

Sump Tank: 2.5 feet with 4 compartments

"Reef Maniac - Ninja: Fish and Coral don't wait for you!"

Link to comment
Share on other sites

Can chk on madpetz website.

Tank : 4 X 2 X 2 with low iron front panel and external overflow

Skimmer : BK SM200 with waste collector

Return Pumps : Red Dragon 6m3 and Ehiem 1262

FR : 2 X Deltec 509 & powered by AB2000

Nitrate Filter : Deltec NF 509 and tee off from AB2000

Calcium R'tor : Deltec PF 501 with RM secondary chamber

Kalkwasser R'tor : Deltec KM500

Chiller : Pansonic 1 HP Compressor with 20m titanium Coil

Wave Makers : 4 X Tunze 6055 with 7096 & Vortec MP40w

Controller : GHL Profilux

Lighting : ATI Powermodule 10 or 8 tubes

Water Top-up : Water Top-Up tank powered by Tunze Osmolator

External Monitor : American Pinpoint pH and Temp. Monitor for main tank and GHL Profilux Controller to measure temp, pH, Redox

Ozonizer : Sander C50

UV : Corallife 6x

Algae Scrubbler

Link to comment
Share on other sites

  • SRC Member

Yeay.. finally found the dream tank already.. 322...

Will start to decoding my tank in the next 2 weeks..

Will list down the equipment and tank for sale next week...

Thanks all for the advise!!! Will post my new tank in the member tank and specs once the tank reached!

Cheers!

Display Tank: 3x2x2 feet (12mm Crystal Glass)

Sump Tank: 2.5 feet with 4 compartments

"Reef Maniac - Ninja: Fish and Coral don't wait for you!"

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share



  • Join us on the largest Reefing community in Asia!

    Sign up and share your reefing journey with us, make friends and get helps from the community .

     

  • Topics

  • Latest Update

    1. 0

      专业制作美国普渡大学西拉法叶校区大学毕业证》Q/微信751558146丨办理普渡大学西拉法叶校区毕业证成绩单,文凭留信网认证,保录取Purdue University,West Lafayette

    2. 0

      〖国外毕业证书〗加拿大MSVU圣文森山大学毕业证成绩单〖Q/微信751558146〗办理文凭教育部学历学位认证Mount Saint Vincent University

    3. 0

      专业制作美国福特汉姆大学毕业证》Q/微信751558146丨办理福特汉姆大学毕业证成绩单,文凭留信网认证,保录取Fordham University

    4. 0

      〖国外毕业证书〗加拿大McGill麦吉尔大学毕业证成绩单〖Q/微信751558146〗办理文凭教育部学历学位认证McGill University

    5. 0

      专业制作美国PITT毕业证》Q/微信751558146丨办理匹兹堡大学毕业证成绩单,文凭留信网认证,保录取University of Pittsburgh

×
×
  • Create New...