Jump to content

My 6x2x1.8 little ocean in front of the ocean


PowderTang
 Share

Recommended Posts

  • SRC Member

Some of you wanted to see my setup so here it goes

Last couple of weeks was spent doing up my 6 footer So have no time to update

Decommed my 3 ft Tank on 6 November Thursday . Took one whole day to transfer all livestock and clear before it exited out of my house at night.

Next morning Friday, here comes the tank.

Whole setup by Aquarium Artist.

post-23849-0-40261400-1416573031_thumb.j

post-23849-0-63372000-1416574249_thumb.j

post-23849-0-71617100-1416574446_thumb.j

post-23849-0-24501900-1416574479_thumb.j

  • Like 1
Link to comment
Share on other sites

  • SRC Member

This is my 3ft before decomm

Anyway Friday night was spent arranging the rockwork

Sat morning, here comes the water and sand by Iwarna

For those of you using water drums, using a trolley like the one on the left is very useful... Especially for big drums like 60l and 120l.. For Easy transport

So the whole Sat 8 Nov was spent transferring the livestocks from holding tank to New tank.

post-23849-0-10513400-1416575119_thumb.j

post-23849-0-22417100-1416575565_thumb.j

post-23849-0-37978700-1416575686_thumb.j

Link to comment
Share on other sites

Your new cabinet for housing your sump not gonna have doors? Open concept?

Display Tank : 36" x 20" x 20" Herbie overflow box design, Sump : 36" x 21" x 17", Frag Tank : 16” x 20” x 16”, custom built by Tank Culture.

Lightings : Ecotech  Radion XR15 Pro x 2 for Main Display Tank, Inled R80 x 1 for Frag Tank.

Chiller : Dalkin 1hp compressor with build-in drop coil.

Skimmer : Skimz Octa SC205i Protein Skimmer.

FR : H2Ocean FMR75 Fluidised Media Reactor with Hailea HX-2500 (Feeder Pump) running Rowaphos.

CR : Skimz Monzter E Series CM122 Calcium Reactor.

BPR: Marine Source Biopellet  Reactor with Continuum Reef Biopellet Fuel. 

Main Return Pump : SICCE Syncra ADV 9.0 & Jebao ACQ-10000 Water Pump.

Wavemaker : Jebao MOW-9 x2 for Main Display Tank & Jebao SLW-20M  Sine Wave Pump for  Frag Tank.

Water Top Up: AutoAqua Smart ATO Lite.

Link to comment
Share on other sites

  • SRC Member

Haha no lah

Tank maker too busy to settle everything together on one day lei... One man show lei...

The doors were only ready one week later

Anyway...

On Sunday 9 November , he came down to fix the light stand and lights for me..

So for the whole week, it was a doorless setup. It is still nice though..

post-23849-0-60167700-1416587428_thumb.j

post-23849-0-43920000-1416587514_thumb.j

Link to comment
Share on other sites

Wow nice setup. Sis.Can have a closer FTS

6.5 * 2 * 2 + 3.75 * 1.5 *1.5,(Decomn on 14/9/08)
4*2*2 + 2.5*1.25*1.25 (Decomn on 1/8/09)
5*2*2 (Fully LED light system, 140 3 watt SSC leds with 60 degree lens)(Decomm)
2.5*2*2(Fully LED Light System,96 3 watt SSC leds with 60 degree lens)(Decomm)

5*2.5*2(LED only)

Eheim return 1 * pump

1 HP Daikin compressor with cooling coil
2 Jebao OW40, 1 ecotech MP40,
1X6085 Tunze wm,

1 CURVE 7 Skimmer

  1 DIY 80 led control by Bluefish mini 

1 radion XR30W G2, 2 Radion XR15G3

Sump area lite by 5 ft T5 , 6 * SSC 3 watt red LED for refugium

1 Full spectrum E27 led light

1 CR control by bubble count

Start No Water Change since 1st Dec 2016

Add new 2.5x2x 1.5 ft 

 nLekOfpYts.jpg
[/quote]


 

Link to comment
Share on other sites

  • SRC Member

Nice rimless reef tank..r u running 2 skimmers? :-)

Something to note, ur filter sock got no holder n it too high up beyond ur sump tank height. water might overflow out if the filter sock get choked. Go diy a cover to cover the filter sock as there is water mist when water & air flow down..

Cheers and happy reefing

@ 291213

Updated video: Kenyee FOWLR

http://m.youtube.com/my_videos

Link to comment
Share on other sites

  • SRC Member

Ok dun see the need to run 2 skimmers..waste electricity,produce more heat,need to clean 1 more skimmer..as for the filter sock, avoid the mouth of the sock from protruding out of the tank..u won't know when water might overflow out..btw, can share what return pump u using? :)

@ 291213

Updated video: Kenyee FOWLR

http://m.youtube.com/my_videos

Link to comment
Share on other sites

Nice tank! Agreed, can skip the small skimmer, and lower the height of filtersock. Filtersock overflow is very common and happens to me all the time, but since mine is way below the sump height, just overflows back to sump.

Keep the sump simple. And u will have much easier time cleaning it, and visually more pleasing for yourself.

 

I Love Stagsss

Link to comment
Share on other sites


Nice FTS ,SIS.

One skimmer more then enough.

And be careful of filter sock overflow.

6.5 * 2 * 2 + 3.75 * 1.5 *1.5,(Decomn on 14/9/08)
4*2*2 + 2.5*1.25*1.25 (Decomn on 1/8/09)
5*2*2 (Fully LED light system, 140 3 watt SSC leds with 60 degree lens)(Decomm)
2.5*2*2(Fully LED Light System,96 3 watt SSC leds with 60 degree lens)(Decomm)

5*2.5*2(LED only)

Eheim return 1 * pump

1 HP Daikin compressor with cooling coil
2 Jebao OW40, 1 ecotech MP40,
1X6085 Tunze wm,

1 CURVE 7 Skimmer

  1 DIY 80 led control by Bluefish mini 

1 radion XR30W G2, 2 Radion XR15G3

Sump area lite by 5 ft T5 , 6 * SSC 3 watt red LED for refugium

1 Full spectrum E27 led light

1 CR control by bubble count

Start No Water Change since 1st Dec 2016

Add new 2.5x2x 1.5 ft 

 nLekOfpYts.jpg
[/quote]


 

Link to comment
Share on other sites

  • SRC Member

Nice 6ft welcome to the club

300Gallons of Pure Goodness! >Dimensions 6x2x2 (Foot)

1: Maxspect 160 Watt qty-2

2: Vortech MP 40 Wes

3:Jaebao WP40 qty-2

3: Skimz Becket Skimmer/ Ehiem 1260

4: Dymax XC 900 Calcium Reactor

5: American Pinpoint PH Controller

6: Iwaki MD 55 And MD 70 (Return)

7: Hydra Aquatics FR45 Reactor

8:Hailea 10HP Chiller

R2R forum->>>http://www.reef2reef.com/forums/photography-forum/154896-ashwins-reefing-photography.html

Link to comment
Share on other sites

Hi Powder Tang

Just to check, there seems to be only 1 center beam in the front of the cabinet stand. Is there any center beam at the back portion of the cabinet? Would that be a cause for concern in the long run? Just asking, I may be wrong cos I am not an engineer.

Link to comment
Share on other sites

No there isn't any centre beam at the back and it's mainly covered at the back so not necessary I think Front centre Beam is for support due to the opening for the doors

Hi ,

Your tank is 6fts long, can the 4 corner beams support the whole weight?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share




  • Join us on the largest Reefing community in Asia!

    Sign up and share your reefing journey with us, make friends and get helps from the community .

     

  • Topics

  • Latest Update

    1. 0

      Carleton Diploma毕业证,卡尔顿大学毕业证——Q微信751558146¥加拿大,毕业证,学位证,文凭,学历认证,留学认证,教育部认证,Carleton University

    2. 0

      办理!!美国MU毕业证*成绩单@Q微信751558146马凯特大学(本科/硕士)毕业证成绩单*MU学位证书文凭各大学保录取Marquette University

    3. 0

      办理!!美国BU毕业证*成绩单@Q微信751558146贝勒大学(本科/硕士)毕业证成绩单*BU学位证书文凭各大学保录取Baylor University

    4. 0

      UWO Diploma毕业证,西安大略大学毕业证——Q微信751558146¥加拿大,毕业证,学位证,文凭,学历认证,留学认证,教育部认证,University of Western Ontario

×
×
  • Create New...