Jump to content

Unable to read hydrometer


IshDeOne
 Share

Recommended Posts

  • SRC Member

I'm in the midst of cycling of my tank. One of the uncle at c328 recommend mi a deep six hydrometer , but i am unable to get a reading on it. i mixed the salt with the decholrinated water , 1/2 cup of salt per gallon of water. My tank is a 3 ft = 56 gallon tank. i mixed most of my salt actually , n i'm still unable to get the level to go up to 1.021..

Any one can help?

newbie here

Link to comment
Share on other sites

You tank actual capacity is usually less than the dimensions due to glass thickness and water level of display tank not forgetting any sand or rocks you might have. As mentioned above, you also have to consider the sump or canister filters etc.

Hydrometer is not so accurate, invest in a refractometer for long term. For hydrometer, apply according to instructions. Also check for trapped bubbles in the indicator.

1.5' Cube | Overflow Box | 1' Sump with filter sock and 3L bacteria king | Eheim 1000 return pump | BM 3.5 | Sunsun JVP-110 wavemaker | Full spectrum Par38
Link to comment
Share on other sites

  • SRC Member

My deep 6 hydroneter measure 0.0015 higher than my refractoneter.

If it shows 1.027 , it is actually 1.0255.

Very constant reading if u use it properly. Gently allows the water to ebter the hydroneter , and makesure no air bubbles is trapped at the swing arm.

Sent from my GT-N7105 using Tapatalk

| Display : 48x30x22 Skimmer : SK-201 skimz

| Sump : 30x24x18 Wavemaker : 2x RW-15 , 1x RW-8

| Cooling : 1HP titanium drop in coil ATO : JBJ

| Lighting : ATI Sunpower 8x54w + 48x cree xte royal blue Return : Jebao dc-6000

| Dosing : Jebao dosing pump [ CaCl2 + NaHCO3 ] Pump :

| Reactor : FSZ Z160 zeolite reactor & phosban 150

| System : ZEOVIT

decomm-ed :

Ydkm SPS reef

:wub: >><< :wub:

Link to comment
Share on other sites

  • SRC Member

Just got a refractometer , and its easy to use uh.Didnt find anything hard actually. As per my guess , the hydrometer is indeed busted as the refractometer read the salinity correctly.

Thanks

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share



×
×
  • Create New...