Jump to content

Looking for External Thermostate for chiller

GoofFish

By GoofFish,
in Sell off/Pasar Malam Shop

 Share

Recommended Posts

chercm Community Regular

chercm

Posted
Posted

U can look for Iwarna for that . Got mine from them

Humble tank :

Size: 4x2.5x2 ft - Display 

Equipment :

Return 1 : Ecotech marine L1

Return 2 : Ecotech marine M1

CR : Skimz CM122 - Caribsea extra course media with Grotech magnesium

Light : ATI 8x54W

 

 

Link to comment
Share on other sites
  • SRC Member
oceanviper Enthusiast

oceanviper

Posted
  • SRC Member
Posted

Care to share how does those external on socket plug works?

I don't have the picture.

It looks like a square box with the controller display at the side/bottom with the socket on it.

Depends on how you mount the controller according to the box size you got.

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites
  • SRC Member
oceanviper Enthusiast

oceanviper

Posted
  • SRC Member
Posted

I had the same problem. The chiller guy connected my sensor to my DT... So now my chiller kicks in for one hour and rests for 3 hours...

Think your case are not same as him where yours kicks in for an hour, rest for 3hrs.

His is kicks in every 4mins.

The duration of the kicks in depend on the chiller/compressor size and the volume of water plus the degC to chill.

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites
  • SRC Member
james72 Newbie

james72

Posted
  • SRC Member
Posted

Thomas, is this reliable? Thinking of installing one of these external thermostat so my 1/3hp arctica can cut in every 1degC instead of 0.5degC

Cheers,

James

Cheers,

James

Reviving my reef tank :

Crystal glass 53" x 22" x 17" rimless (inclusive of 12"x22"x17" IOS)

Life Reef HVS3-24 with mazzei venturi

ATI Sunpower 8 x 39w T5 (4 x Blue plus, 2 x Aqua blue special, Coral plus)

ZET Light 3 x 3w LEDs moonlight

Arctica 1/3 Hp + 1/4 Hp back up

Vortech mp40w x 3 + Jebao wp25

Eheim 1264 x 3 + water blaster 5000

Vortech back up battery

TLF-150 + Rowaphos

Activated carbon

Kamoer 3 channel + CaCl2 + NaHCo3

150L Refugium with DSB, miracle mud, cheato

2ft T5 x 2 light tubes for refugium

Link to comment
Share on other sites
  • SRC Member
oceanviper Enthusiast

oceanviper

Posted
  • SRC Member
Posted

Thomas, is this reliable? Thinking of installing one of these external thermostat so my 1/3hp arctica can cut in every 1degC instead of 0.5degC

Cheers,

James

Hi James.

The term reliable depends on how you use it.

As long as the current rating for the relay reside in the controller able to handle the load, then is alright.

I have been doing that since I'm with freshwater tank to marine....

In fact now, after I have restart the tank back in Feb 2014 with compressor instead of chiller, my setup is slightly different where i use external relay to handle the load.

This will allows me to get the relay replacement for worst case.

Using the internal relay from the temperature controller will have difficulties or you may need to get an entire controller replace when that relay spoilt

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites
  • SRC Member
james72 Newbie

james72

Posted
  • SRC Member
Posted

Oh my meaning of reliable is device dont kaput within 1-2yrs time, as in we operate within the design load.

Cheers,

James

Cheers,

James

Reviving my reef tank :

Crystal glass 53" x 22" x 17" rimless (inclusive of 12"x22"x17" IOS)

Life Reef HVS3-24 with mazzei venturi

ATI Sunpower 8 x 39w T5 (4 x Blue plus, 2 x Aqua blue special, Coral plus)

ZET Light 3 x 3w LEDs moonlight

Arctica 1/3 Hp + 1/4 Hp back up

Vortech mp40w x 3 + Jebao wp25

Eheim 1264 x 3 + water blaster 5000

Vortech back up battery

TLF-150 + Rowaphos

Activated carbon

Kamoer 3 channel + CaCl2 + NaHCo3

150L Refugium with DSB, miracle mud, cheato

2ft T5 x 2 light tubes for refugium

Link to comment
Share on other sites
  • SRC Member
oceanviper Enthusiast

oceanviper

Posted
  • SRC Member
Posted

Oh my meaning of reliable is device dont kaput within 1-2yrs time, as in we operate within the design load.

Cheers,

James

Hi James.

Nope, unlikely....

FYI, I have been using the same controller more than 6 years....

And the model is FOX-2000

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites
  • SRC Member
james72 Newbie

james72

Posted
  • SRC Member
Posted

Thats great!

Cheers,

James

Cheers,

James

Reviving my reef tank :

Crystal glass 53" x 22" x 17" rimless (inclusive of 12"x22"x17" IOS)

Life Reef HVS3-24 with mazzei venturi

ATI Sunpower 8 x 39w T5 (4 x Blue plus, 2 x Aqua blue special, Coral plus)

ZET Light 3 x 3w LEDs moonlight

Arctica 1/3 Hp + 1/4 Hp back up

Vortech mp40w x 3 + Jebao wp25

Eheim 1264 x 3 + water blaster 5000

Vortech back up battery

TLF-150 + Rowaphos

Activated carbon

Kamoer 3 channel + CaCl2 + NaHCo3

150L Refugium with DSB, miracle mud, cheato

2ft T5 x 2 light tubes for refugium

Link to comment
Share on other sites
  • SRC Member
oceanviper Enthusiast

oceanviper

Posted
  • SRC Member
Posted

Any idea how much does this cost?

Depending wether you are getting from forum ( used ), or you get someone to DIY for you or you buy the parts and DIY yourself.

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites
  • SRC Member
youdontnowm Newbie

youdontnowm

Posted
  • SRC Member
Posted

Depending wether you are getting from forum ( used ), or you get someone to DIY for you or you buy the parts and DIY yourself.

Did u put in a contactor for the thermostat too ?

Sent from my GT-N7105 using Tapatalk

| Display : 48x30x22 Skimmer : SK-201 skimz

| Sump : 30x24x18 Wavemaker : 2x RW-15 , 1x RW-8

| Cooling : 1HP titanium drop in coil ATO : JBJ

| Lighting : ATI Sunpower 8x54w + 48x cree xte royal blue Return : Jebao dc-6000

| Dosing : Jebao dosing pump [ CaCl2 + NaHCO3 ] Pump :

| Reactor : FSZ Z160 zeolite reactor & phosban 150

| System : ZEOVIT

decomm-ed :

Ydkm SPS reef

:wub: >><< :wub:

Link to comment
Share on other sites
  • SRC Member
oceanviper Enthusiast

oceanviper

Posted
  • SRC Member
Posted

Thats great!

Cheers,

James

Get the FOX model where you can have control kicks in at temperature down to 1 decimal.

The other model only allows you to kicks at absolute value, no decimal...

Ex. temperature set only : 26, 27, 28, etc

Fox model --> 26.5, 27.5, 27.3, etc

The deg to chill down can be from 0.1 to 1.2, etc

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites
  • SRC Member
oceanviper Enthusiast

oceanviper

Posted
  • SRC Member
Posted

Did u put in a contactor for the thermostat too ?

Sent from my GT-N7105 using Tapatalk

Contactor ??

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites
  • SRC Member
oceanviper Enthusiast

oceanviper

Posted
  • SRC Member
Posted

i can't recalled the price as i got mine long time ago

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites
  • SRC Member
youdontnowm Newbie

youdontnowm

Posted
  • SRC Member
Posted

Wats the damage for the fox 2000

Hi, can share where can buy this fox controller?thks alot..:)

Most probably i will be going down this afternoon to SLT acez today to get my fox-2001.

Will uodate u guys the price if got go.

Sent from my GT-N7105 using Tapatalk

| Display : 48x30x22 Skimmer : SK-201 skimz

| Sump : 30x24x18 Wavemaker : 2x RW-15 , 1x RW-8

| Cooling : 1HP titanium drop in coil ATO : JBJ

| Lighting : ATI Sunpower 8x54w + 48x cree xte royal blue Return : Jebao dc-6000

| Dosing : Jebao dosing pump [ CaCl2 + NaHCO3 ] Pump :

| Reactor : FSZ Z160 zeolite reactor & phosban 150

| System : ZEOVIT

decomm-ed :

Ydkm SPS reef

:wub: >><< :wub:

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Join us on the largest Reefing community in Asia!

    Sign up and share your reefing journey with us, make friends and get helps from the community .

     

  • Topics

  • Latest Update

    1. 0

      Selling Nano Tank With FIlter and Chiller and Maxspect Jump L-130

      Selling the above. All Items Used for 3 months only. 1.Tank and HOB FIlter. (Tank size: L38cm x W30cm x H 28cm). Selling for $50 2.Maxspect Jump L130. Selling for $60 3. Chiller good for 60l. Selling for $80 Take all for $160. FCFS Collection only, Bukit Batok. PM me to deal.
      Zac in Sell off/Pasar Malam Shop
    2. 2

      Fluval Sea Marine & Reef LED 2.0

      Upz Sent from my SM-N980F using Tapatalk
      Shilamin in Sell off/Pasar Malam Shop
    3. 225

      WTS live rotifers, tigger pods, phyto

      ups tele me at littlefishaqua location at tamp/hougang $50 worth of purchase foc delivery
      MarineSeller in Sell off/Pasar Malam Shop
    4. 0

      Corals to sell/give

      Free - Have several GSP on tank wall. Can scrape and give to whoever wants Free several broken pieces of monti Also large size green monti for sale for $20 Zoa colony on rock $20 zoas with GSP (slightly bigger) $10 zoas only Medium size toadstool -$15 Collection 523608 Sent from my FCP-N49 using Tapatalk
      Jimbo in Sell off/Pasar Malam Shop
    5. 0

      UQ毕业证【微信：A746103619】办理昆士兰大学毕业证 成绩单 留信认证The University of Queensland diploma

      UQ毕业证【微信：A746103619】办理昆士兰大学毕业证 成绩单 留信认证The University of Queensland diploma ◆【咨询方式】 微信 ：A746103619 -----------------◆---------------------业务类型-------------------◆-----------------------------◆ 【主营项目】： ★★毕业証、成绩单-- OFFER--真实可查留信网认证等.等！ ★★办理各国各大学文凭（一对一专业服务，可全程监控跟踪进度） -----------------◆---------------------制作工艺-------------------◆-----------------------------◆ 【高仿真】： ★★凭借多年的制作经验本公司制作《激光》《水印》《钢印》《烫金》《紫外线》凹凸版，uv版等防伪技术一流，高精仿度几乎跟学校100%相同！让您绝对满意。 -----------------◆---------------------操作周期-------------------◆----------------------------◆ 【高效率】 ★★本公司承诺各位顾客在最短时间内制作完成并交货。不论您身在何处，只要您有需要，我们便会以最高效的办事效率满足您的需求，如果我们没有您所想办的学校那么只要您能提供版本我们就可以为您专门开版办理一周内完成。 -----------------◆---------------------公司理念-------------------◆-----------------------------◆ 【诚信为主】： ★★我們以質量求生存，.以服务求发展有雄厚的实力，专业的团队咨询顾问为您细心解答，可详谈，是真是假，眼见为实，让您真正放心，平凡人生,尽我所能助您一臂之力让我們携手圆您梦想! ◆【公司宗旨】：诚信为主，質量爲本，客戶爲先，解您所忧 ！ -----------------◆---------------------业务范围-------------------◆-----------------------------◆ 【主营国家】:加拿大、澳大利亞、新西蘭、新加坡、美國、英國、歐洲-----等等! -----------------◆---------------------联系方式-------------------◆-----------------------------◆ 【贴心专线】: 微信：A746103619 ★敬请保留此联系方式，以备用！如有不在线请给我们留言！我们将在第一时间给您回复! ★★此贴长年有效——欢迎各位新老顾客咨询，我们将会竭诚为您服务!
      imyosq2quv in LPS Coral forum
×
×
  • Create New...