SRC Member GoofFish Posted September 2, 2014 SRC Member Share Posted September 2, 2014 My Haelia chiller giving problem again. Kick every 4mins. anyone have PM me. Im not a diy person. Best those that is connected to a socket plug. cheers Happy reefing Quote Link to comment Share on other sites More sharing options...
chercm Posted September 3, 2014 Share Posted September 3, 2014 U can look for Iwarna for that . Got mine from them Quote Humble tank : Size: 4x2.5x2 ft - Display Equipment : Return 1 : Ecotech marine L1 Return 2 : Ecotech marine M1 CR : Skimz CM122 - Caribsea extra course media with Grotech magnesium Light : ATI 8x54W Link to comment Share on other sites More sharing options...
phuakl Posted September 3, 2014 Share Posted September 3, 2014 Care to share how does those external on socket plug works? Quote Link to comment Share on other sites More sharing options...
SRC Member Angel Keeper Posted September 3, 2014 SRC Member Share Posted September 3, 2014 I had the same problem. The chiller guy connected my sensor to my DT... So now my chiller kicks in for one hour and rests for 3 hours... Quote Link to comment Share on other sites More sharing options...
SRC Member oceanviper Posted September 3, 2014 SRC Member Share Posted September 3, 2014 Care to share how does those external on socket plug works? I don't have the picture. It looks like a square box with the controller display at the side/bottom with the socket on it. Depends on how you mount the controller according to the box size you got. Quote Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 ) Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7 Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 ) Compressor drop-in coil Wavemaker : Tunze 6105 x 1 Lights : Modular based DIY LED light x 4 Chaeto in the sump Link to comment Share on other sites More sharing options...
SRC Member oceanviper Posted September 3, 2014 SRC Member Share Posted September 3, 2014 I had the same problem. The chiller guy connected my sensor to my DT... So now my chiller kicks in for one hour and rests for 3 hours... Think your case are not same as him where yours kicks in for an hour, rest for 3hrs. His is kicks in every 4mins. The duration of the kicks in depend on the chiller/compressor size and the volume of water plus the degC to chill. Quote Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 ) Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7 Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 ) Compressor drop-in coil Wavemaker : Tunze 6105 x 1 Lights : Modular based DIY LED light x 4 Chaeto in the sump Link to comment Share on other sites More sharing options...
Welly Posted September 3, 2014 Share Posted September 3, 2014 Maybe your pump is too small for the chiller ? Quote Link to comment Share on other sites More sharing options...
SRC Member Angel Keeper Posted September 3, 2014 SRC Member Share Posted September 3, 2014 Mine used to kick in every 3 minutes until the chiller guy placed the sensor in my DT. Quote Link to comment Share on other sites More sharing options...
SRC Member Angel Keeper Posted September 3, 2014 SRC Member Share Posted September 3, 2014 What Hailea model is that? The chiller guy told me that this is a common problem for certain Hailea models... He says that the sensor is located at a specific location which somehow causes this problem... Quote Link to comment Share on other sites More sharing options...
Moderators thomas_lim Posted September 3, 2014 Moderators Share Posted September 3, 2014 i believe this look like what TS is looking for. Quote Tom Link to comment Share on other sites More sharing options...
SRC Member james72 Posted September 3, 2014 SRC Member Share Posted September 3, 2014 Thomas, is this reliable? Thinking of installing one of these external thermostat so my 1/3hp arctica can cut in every 1degC instead of 0.5degC Cheers, James Quote Cheers, James Reviving my reef tank : Crystal glass 53" x 22" x 17" rimless (inclusive of 12"x22"x17" IOS) Life Reef HVS3-24 with mazzei venturi ATI Sunpower 8 x 39w T5 (4 x Blue plus, 2 x Aqua blue special, Coral plus) ZET Light 3 x 3w LEDs moonlight Arctica 1/3 Hp + 1/4 Hp back up Vortech mp40w x 3 + Jebao wp25 Eheim 1264 x 3 + water blaster 5000 Vortech back up battery TLF-150 + Rowaphos Activated carbon Kamoer 3 channel + CaCl2 + NaHCo3 150L Refugium with DSB, miracle mud, cheato 2ft T5 x 2 light tubes for refugium Link to comment Share on other sites More sharing options...
SRC Member oceanviper Posted September 3, 2014 SRC Member Share Posted September 3, 2014 Thomas, is this reliable? Thinking of installing one of these external thermostat so my 1/3hp arctica can cut in every 1degC instead of 0.5degC Cheers, James Hi James. The term reliable depends on how you use it. As long as the current rating for the relay reside in the controller able to handle the load, then is alright. I have been doing that since I'm with freshwater tank to marine.... In fact now, after I have restart the tank back in Feb 2014 with compressor instead of chiller, my setup is slightly different where i use external relay to handle the load. This will allows me to get the relay replacement for worst case. Using the internal relay from the temperature controller will have difficulties or you may need to get an entire controller replace when that relay spoilt Quote Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 ) Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7 Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 ) Compressor drop-in coil Wavemaker : Tunze 6105 x 1 Lights : Modular based DIY LED light x 4 Chaeto in the sump Link to comment Share on other sites More sharing options...
SRC Member james72 Posted September 3, 2014 SRC Member Share Posted September 3, 2014 Oh my meaning of reliable is device dont kaput within 1-2yrs time, as in we operate within the design load. Cheers, James Quote Cheers, James Reviving my reef tank : Crystal glass 53" x 22" x 17" rimless (inclusive of 12"x22"x17" IOS) Life Reef HVS3-24 with mazzei venturi ATI Sunpower 8 x 39w T5 (4 x Blue plus, 2 x Aqua blue special, Coral plus) ZET Light 3 x 3w LEDs moonlight Arctica 1/3 Hp + 1/4 Hp back up Vortech mp40w x 3 + Jebao wp25 Eheim 1264 x 3 + water blaster 5000 Vortech back up battery TLF-150 + Rowaphos Activated carbon Kamoer 3 channel + CaCl2 + NaHCo3 150L Refugium with DSB, miracle mud, cheato 2ft T5 x 2 light tubes for refugium Link to comment Share on other sites More sharing options...
phuakl Posted September 3, 2014 Share Posted September 3, 2014 i believe this look like what TS is looking for. Any idea how much does this cost? Quote Link to comment Share on other sites More sharing options...
SRC Member oceanviper Posted September 3, 2014 SRC Member Share Posted September 3, 2014 Oh my meaning of reliable is device dont kaput within 1-2yrs time, as in we operate within the design load. Cheers, James Hi James. Nope, unlikely.... FYI, I have been using the same controller more than 6 years.... And the model is FOX-2000 Quote Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 ) Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7 Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 ) Compressor drop-in coil Wavemaker : Tunze 6105 x 1 Lights : Modular based DIY LED light x 4 Chaeto in the sump Link to comment Share on other sites More sharing options...
SRC Member james72 Posted September 3, 2014 SRC Member Share Posted September 3, 2014 Thats great! Cheers, James Quote Cheers, James Reviving my reef tank : Crystal glass 53" x 22" x 17" rimless (inclusive of 12"x22"x17" IOS) Life Reef HVS3-24 with mazzei venturi ATI Sunpower 8 x 39w T5 (4 x Blue plus, 2 x Aqua blue special, Coral plus) ZET Light 3 x 3w LEDs moonlight Arctica 1/3 Hp + 1/4 Hp back up Vortech mp40w x 3 + Jebao wp25 Eheim 1264 x 3 + water blaster 5000 Vortech back up battery TLF-150 + Rowaphos Activated carbon Kamoer 3 channel + CaCl2 + NaHCo3 150L Refugium with DSB, miracle mud, cheato 2ft T5 x 2 light tubes for refugium Link to comment Share on other sites More sharing options...
SRC Member oceanviper Posted September 4, 2014 SRC Member Share Posted September 4, 2014 Any idea how much does this cost? Depending wether you are getting from forum ( used ), or you get someone to DIY for you or you buy the parts and DIY yourself. Quote Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 ) Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7 Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 ) Compressor drop-in coil Wavemaker : Tunze 6105 x 1 Lights : Modular based DIY LED light x 4 Chaeto in the sump Link to comment Share on other sites More sharing options...
SRC Member youdontnowm Posted September 4, 2014 SRC Member Share Posted September 4, 2014 Depending wether you are getting from forum ( used ), or you get someone to DIY for you or you buy the parts and DIY yourself. Did u put in a contactor for the thermostat too ? Sent from my GT-N7105 using Tapatalk Quote | Display : 48x30x22 Skimmer : SK-201 skimz | Sump : 30x24x18 Wavemaker : 2x RW-15 , 1x RW-8 | Cooling : 1HP titanium drop in coil ATO : JBJ | Lighting : ATI Sunpower 8x54w + 48x cree xte royal blue Return : Jebao dc-6000 | Dosing : Jebao dosing pump [ CaCl2 + NaHCO3 ] Pump : | Reactor : FSZ Z160 zeolite reactor & phosban 150 | System : ZEOVIT decomm-ed : Ydkm SPS reef >><< Link to comment Share on other sites More sharing options...
SRC Member oceanviper Posted September 4, 2014 SRC Member Share Posted September 4, 2014 Thats great! Cheers, James Get the FOX model where you can have control kicks in at temperature down to 1 decimal. The other model only allows you to kicks at absolute value, no decimal... Ex. temperature set only : 26, 27, 28, etc Fox model --> 26.5, 27.5, 27.3, etc The deg to chill down can be from 0.1 to 1.2, etc Quote Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 ) Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7 Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 ) Compressor drop-in coil Wavemaker : Tunze 6105 x 1 Lights : Modular based DIY LED light x 4 Chaeto in the sump Link to comment Share on other sites More sharing options...
SRC Member oceanviper Posted September 4, 2014 SRC Member Share Posted September 4, 2014 Did u put in a contactor for the thermostat too ? Sent from my GT-N7105 using Tapatalk Contactor ?? Quote Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 ) Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7 Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 ) Compressor drop-in coil Wavemaker : Tunze 6105 x 1 Lights : Modular based DIY LED light x 4 Chaeto in the sump Link to comment Share on other sites More sharing options...
taufiq85 Posted September 4, 2014 Share Posted September 4, 2014 Wats the damage for the fox 2000 Quote Link to comment Share on other sites More sharing options...
SRC Member oceanviper Posted September 4, 2014 SRC Member Share Posted September 4, 2014 i can't recalled the price as i got mine long time ago Quote Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 ) Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7 Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 ) Compressor drop-in coil Wavemaker : Tunze 6105 x 1 Lights : Modular based DIY LED light x 4 Chaeto in the sump Link to comment Share on other sites More sharing options...
SRC Member kenyee Posted September 4, 2014 SRC Member Share Posted September 4, 2014 Hi, can share where can buy this fox controller?thks alot.. Quote @ 291213 Updated video: Kenyee FOWLR http://m.youtube.com/my_videos Link to comment Share on other sites More sharing options...
SRC Member youdontnowm Posted September 4, 2014 SRC Member Share Posted September 4, 2014 Wats the damage for the fox 2000 Hi, can share where can buy this fox controller?thks alot.. Most probably i will be going down this afternoon to SLT acez today to get my fox-2001. Will uodate u guys the price if got go. Sent from my GT-N7105 using Tapatalk Quote | Display : 48x30x22 Skimmer : SK-201 skimz | Sump : 30x24x18 Wavemaker : 2x RW-15 , 1x RW-8 | Cooling : 1HP titanium drop in coil ATO : JBJ | Lighting : ATI Sunpower 8x54w + 48x cree xte royal blue Return : Jebao dc-6000 | Dosing : Jebao dosing pump [ CaCl2 + NaHCO3 ] Pump : | Reactor : FSZ Z160 zeolite reactor & phosban 150 | System : ZEOVIT decomm-ed : Ydkm SPS reef >><< Link to comment Share on other sites More sharing options...
SRC Member GoofFish Posted September 4, 2014 Author SRC Member Share Posted September 4, 2014 i believe this look like what TS is looking for. yes these is the one that im looking for... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.