Mp10 for sale

[joby553]

Bought second yesterday. Didn't know not suitable for 12mm glass.

Bought $250 selling $230

Call 918OO 553 for fast deal

Sent from my iPhone using Tapatalk

[ReDDeviLs]

Hi bro. It can be used on 12mm glass.

[joby553]

Hi bro. It can be used on 12mm glass.

Bro can you teach me? Mine kept slipping, dropping, making noise and disappointing.

Sent from my iPhone using Tapatalk

[joby553]

I feel like glueing it onto the glass Lo.

Sent from my iPhone using Tapatalk

[peacemaker]

The recommended maximum glass thickness is approx 9.5mm, so this explains why it could not work on 12mm. I've personally tried on 10mm and it works fine though. You could try to remove the rubber gasket from the wet side to see if it helps, but I wouldn't recommend it as it may scratch your glass if you are not careful. Also, if you plan to run it at maximum speed, vibrations may cause it to drop too.

[joby553]

The recommended maximum glass thickness is approx 9.5mm, so this explains why it could not work on 12mm. I've personally tried on 10mm and it works fine though. You could try to remove the rubber gasket from the wet side to see if it helps, but I wouldn't recommend it as it may scratch your glass if you are not careful. Also, if you plan to run it at maximum speed, vibrations may cause it to drop too.

Yes bro, I actually tried everything I searched on the Internet, take out the rubber both side, one side, change side. On max, on minimum, reef auto mode. Best result was auto with gasket on the inside. But even then on lasted 5 minutes before it dropped.

Sent from my iPhone using Tapatalk

[ReDDeviLs]

for me i did not put in any spacer, tried on green mode full while sync with other mp40s and after that using it on reef crest mode on max 75%. i am using 12mm glass though but i mus agree that it was alittle loose.

when i place the wetside i apply some force to press on the glass to ensure microbubbles been squeezed out if any.

it comes with a sticky pad to hold the cable ontop of the mp10 at the dry side which i also did.

maybe i was lucky or could it be the magnet gets weaker over time?

mine is about 1yr+ old

[joby553]

Bro did you remove the rubber pads at the dry and wet side?

Sent from my iPhone using Tapatalk

[joby553]

Up. Willing to trade for rw8 or wp25 plus you top up.

Sent from my iPhone using Tapatalk

[joby553]

Reserved for viewing

Sent from my iPhone using Tapatalk

[Clement_jr]

mine was weak too, on 10mm.

had to use a cable tie on the wire to help support the weight of dry side, otherwise keep slipping..

i suppose the magnet is generally weaker...

[joby553]

mine was weak too, on 10mm.

had to use a cable tie on the wire to help support the weight of dry side, otherwise keep slipping..

i suppose the magnet is generally weaker...

I think they purposely make weaker so you have to buy mp40

Sent from my iPhone using Tapatalk

[solasido]

bro

it can be used on 12mm glass

for the wet side, put magnet cleaner beneath to help holding it.

For the dry side secure the cable so that it will not drop.

I tried last time and it still functions well.

[surreal1228]

Agree w solasido.

also very importantly, must clean ur glass before u put wet side. any algae must be scratched off.

Sent from my GT-N7105 using Tapatalk

[joby553]

Never thought of this, and I promised a viewing tonight already. If not I will try.

Sent from my iPhone using Tapatalk

[joby553]

Problem solved by placing cleaner magnet underneath. Very thank you to solasido and kkk121 bros. also very sorry to the bro I supposed to meet.

Mods please close thread!

Sent from my iPhone using Tapatalk