Jump to content

Metal Tank Stand


Chris
 Share

Recommended Posts

  • SRC Member

Need some advise...Anyone can help?

I have had a 4X2X2 for over 1.5 years. It was converted from FW and rests on a standard metal stand. Recently, discover it's coat is peeling and powdery rust appearing at few spots. I'm worried if it will hold. Is there anyway to remedy this or should I change to a wooden cabinet. If so I will have to set up a whole new system cos I have no idea how I could move the present tank to a new cabinet. Advice please. Gong Xi!

I think (marine) therefore I am

Link to comment
Share on other sites

  • SRC Member

read in some post here that its dangerous to use those metal stands as they would corrode esp in saltwater...

presence of rust powder is evident that its happening in yer tank....

i think u have to look for other alternatives....

Link to comment
Share on other sites

  • SRC Member

it's time to upgrade & discard away your metal stand :P personally i experience tat b4...no matter whether u repaint it 1000x...rust will still appear :angry:

i suggest u sell off your old tank and buy a tank wif cabinet

or...custom make a stainless steel rack....get a big blue tub(those us to contain Koi)....fill it wif you tank water...tsfr your tank inhabitants there....shift your existing tank to the stainless steel tank...and tsfr your inhabitants & water from the blue tub back to your tank :shock: it is going to be a hell of a work :sick:

Link to comment
Share on other sites

As long as you treat your metal stand with an anti-rust compound, epoxy-paint and then paint over a few layers of paint.... you should have rust protection that lasts a long time.... unless you scratched it thru the paint and down to the metal.

You dun see stainless steel ships in the sea... :)

My stand is standard angle bar steel.... custom made made by my father-on-law who heads PSA operations.

IMO rust is just an external thing... you can treat it. Metal stands are much much safer and stronger than wood.

There is no need to panic. B)

Link to comment
Share on other sites

I'm using one of those wrought iron stand from a FW LFS, the construct looks good, and bars are of at least 1-1.5' (though I know there are those of 2').

I use them to house my 3ft tank and a 3ft sump. Mine's an open concept.

Before I use them, I coated them with a primer my brother uses for his VW 69' Beetle to stop and prevent rust.

I suppose if you make the necessary precautions and remember to wipe them down everytime u do maintenance, it should be fine. :)

Link to comment
Share on other sites

  • SRC Member

I've also used one of the FW wrought iron stand for my 2 ft tank.. din care about it and the paint peeled off like mad and rusted like hell....

I was also very worried about the integrity of the stand in the long run, as rust though a external thing, would expose the inner parts to corrosion too as rust is porous....

Anyway, I bought this paint call "hammerite" which is to coat over rusty metals and give it a good waterproof coat.... I applied 2 thick layers onto the stand w/o removing the tanks... and indeed no rust ever~!!!!! I would recommend this paint if u r lazy to dismantle your tank...

Link to comment
Share on other sites

I used Hammerite too for my old tank! Works great! ;)

Rust will take a long long time to corrode metal to the point of structural failure.... wood rot on the other hand... well... unless you have expensive chengai wood.... I personally never trust wood. Wood absorbs water.

Link to comment
Share on other sites

  • SRC Member

hi was wondering can those normal metal stand with hold the weight of a 4ft by 2ft by 2ft ? from those LH shops .?

AT when u are using ur metal stand may i ask what size is ur tank ?

and where to buy that special paint ?

does many coating makes a different ?

thank you :thanks:

Link to comment
Share on other sites

  • SRC Member

Instead of using paint, why not use a sacrificial anode.

Typically Magnesium or Zinc is used. Certain metals such as Mg and Zn are more likely to rust compared to other metals due to their place on the Galvanic Series. When you have a iron pipe that you want to protect from rust, you connect it to a magnesium bar (the sacrificial anode), a differential current will be created between Iron and Mg, creating a cathode and an anode, like a battery. The current will flow to the Mg and it will rust, leaving the Iron untouched.

Link to comment
Share on other sites

Instead of using paint, why not use a sacrificial anode.

Typically Magnesium or Zinc is used. Certain metals such as Mg and Zn are more likely to rust compared to other metals due to their place on the Galvanic Series. When you have a iron pipe that you want to protect from rust, you connect it to a magnesium bar (the sacrificial anode), a differential current will be created between Iron and Mg, creating a cathode and an anode, like a battery. The current will flow to the Mg and it will rust, leaving the Iron untouched.

Yeah... we use that on metal hulls of boats! The zinc anodes placed on metal plates underwater will 'attract' corrosion.

:) Go Navy!

But in this case, there is no electrical field in the metal stand to react with, unlike any metal object you place in corrosive saltwater. I don't see how this would work out of water as there is no electrolytic action.

:unsure:

AT

Link to comment
Share on other sites

  • SRC Member

Just spoken to some tanks makers they told me they are using black metal rod or either tier metal iron rod those u see at fish shops but they said no matter how much u coat outsdie it will still rust insdie and it will crash in time to come like a year or 2 :(

can anyone advise me on this ??

AT how long did ur metal stand last ? and what was the size of the tank ?

thanks

woonming :evil:

Link to comment
Share on other sites

  • SRC Member
Metal stand collapsing in a year???

And you believe him?? :rolleyes:

Did he try to hardsell you his excess stock of wooden cabinets? :yeah:

Mine has been standing for about 2 yrs it looks okie. However, I am quite worry bcos the sump tank ever overflow on few occasion, flooding my floor. So dunno if the base is still strong and health, cannot see either ........... any way to check?

dino07.gif
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share



×
×
  • Create New...