Jump to content

Ydkm Sps Reef


youdontnowm
 Share

Recommended Posts

  • SRC Member

Stand looks Solid! Very exiciting bro.

thanks !

Same problem I face when I get the recent 5 footer. I think your house same as my house. Old house small door

yup, next time if were to sell, have to open up the window again ! hahaha

Very nice. Would help if you had the ah meh number ( if u remember my PM)

Sent from my iPhone using Tapatalk

yup i remember haha but i dont have the number :upsidedown:

Can't wait for your full setup... Nice!

i cant wait too ! :groupwavereversed:

| Display : 48x30x22 Skimmer : SK-201 skimz

| Sump : 30x24x18 Wavemaker : 2x RW-15 , 1x RW-8

| Cooling : 1HP titanium drop in coil ATO : JBJ

| Lighting : ATI Sunpower 8x54w + 48x cree xte royal blue Return : Jebao dc-6000

| Dosing : Jebao dosing pump [ CaCl2 + NaHCO3 ] Pump :

| Reactor : FSZ Z160 zeolite reactor & phosban 150

| System : ZEOVIT

decomm-ed :

Ydkm SPS reef

:wub: >><< :wub:

Link to comment
Share on other sites

  • SRC Member

Solid!! Cant wait for her to be filled up (:

300Gallons of Pure Goodness! >Dimensions 6x2x2 (Foot)

1: Maxspect 160 Watt qty-2

2: Vortech MP 40 Wes

3:Jaebao WP40 qty-2

3: Skimz Becket Skimmer/ Ehiem 1260

4: Dymax XC 900 Calcium Reactor

5: American Pinpoint PH Controller

6: Iwaki MD 55 And MD 70 (Return)

7: Hydra Aquatics FR45 Reactor

8:Hailea 10HP Chiller

R2R forum->>>http://www.reef2reef.com/forums/photography-forum/154896-ashwins-reefing-photography.html

Link to comment
Share on other sites

  • SRC Member

On thursday i filled up the tank and sump with distillld water 0tds.
I took off my ro, after the 3rd stage, it went to di instead. The flow rate is veryyyyyy fast. Produced 0tds of 320litres in 1.5 hour!! :goodjob: However the di resins will be completely exhausted after 320litres. Tds will rise to 1 and 2 and so on.

total refilled 2 di resins to fill up tank and sump which cost me 12$ for 660 litres .

post-22536-14087930976185_thumb.jpg

Friday, Dumped 1 whole bucket of skimz salt 20kg. Salinity went above 1.030 as i didnt on my return pump.
post-22536-14087933681172_thumb.jpg

Was playing around with the scape on the floor first. stacking , arranging , epoxy and glue here and there.
Took me especially lots of time for this tonga.
post-22536-14087938233828_thumb.jpg

post-22536-14087935039356_thumb.jpg

Then moved it into the tank and changed a little.
post-22536-14087935685904_thumb.jpg

Then substrate in, still need about roughly 30lbs of special grade caribsea more .
post-22536-14087936323401_thumb.jpg

Now Day 1 of cycling with prodibio biodigest , bioptim , fm ultra bak , mb7 , zeo zeobak , zeo start3 . Just spam whatever i have :cheers: :

post-22536-14087936764594_thumb.jpg


Now im waiting impatiently for the tank to be cycled and I Seriously cant wait to fill it with colonies!!!!

Sent from my GT-N7105 using Tapatalk

| Display : 48x30x22 Skimmer : SK-201 skimz

| Sump : 30x24x18 Wavemaker : 2x RW-15 , 1x RW-8

| Cooling : 1HP titanium drop in coil ATO : JBJ

| Lighting : ATI Sunpower 8x54w + 48x cree xte royal blue Return : Jebao dc-6000

| Dosing : Jebao dosing pump [ CaCl2 + NaHCO3 ] Pump :

| Reactor : FSZ Z160 zeolite reactor & phosban 150

| System : ZEOVIT

decomm-ed :

Ydkm SPS reef

:wub: >><< :wub:

Link to comment
Share on other sites

  • SRC Member

Nice coast to coast overflow bean animal. I belive more will start to use this system

yes i belive more will start to use this overflow as well !!

right now its me and tofubox using :thumbsup:

Solid!! Cant wait for her to be filled up (:

its filled :yahoo:

Solid !!!

thanks bro , your sps is solid too :thumbsup:

Can snap a detail pic of the coast to coast overflow bean animal. Quite a funny name. Ha ha

http://www.beananimal.com/projects/silent-and-fail-safe-aquarium-overflow-system.aspx

and

http://www.glassreef.com/basics_overflow.php

this will explain how it works haha. imo it is durso standpipe without hole at the cap and control water level in the overflow by a valve ,+ it is external + better surface skimming to remove oil etc + 2 extra pipes for emergency incase the siphon pipe is clogged up. ( happens to me once !!!!! tank overflowed. :chair: )

Oh and i have also changed my nozzle that i bought from madpetz.

Changed my nozzle from this

ugepy9ud.jpg

To

a3ugyqeb.jpg

Why ? Because it is longer! Better control of flow direction + Can go under the water level so it will not cause splashing of saltwater out of the tank and also to remove the splashing noise.

An advise for those who is planning to make New tanks, make sure u get a threaded bulkhead or u will find yourself to be quite in a dipshit like me looking for the nozzle that is for SLIP bulkhead. almost all the online stores US/fishstreet etc is selling threaded. And i realised , almost all local tank makers likes to use slip bulkhead which is a nono for me but i didnt know untill last minute.

take note of that ya (:

  • Like 1

| Display : 48x30x22 Skimmer : SK-201 skimz

| Sump : 30x24x18 Wavemaker : 2x RW-15 , 1x RW-8

| Cooling : 1HP titanium drop in coil ATO : JBJ

| Lighting : ATI Sunpower 8x54w + 48x cree xte royal blue Return : Jebao dc-6000

| Dosing : Jebao dosing pump [ CaCl2 + NaHCO3 ] Pump :

| Reactor : FSZ Z160 zeolite reactor & phosban 150

| System : ZEOVIT

decomm-ed :

Ydkm SPS reef

:wub: >><< :wub:

Link to comment
Share on other sites

  • SRC Member

I like your tonga scape :)

Cheers,

James

Cheers,

James

Reviving my reef tank :

Crystal glass 53" x 22" x 17" rimless (inclusive of 12"x22"x17" IOS)

Life Reef HVS3-24 with mazzei venturi

ATI Sunpower 8 x 39w T5 (4 x Blue plus, 2 x Aqua blue special, Coral plus)

ZET Light 3 x 3w LEDs moonlight

Arctica 1/3 Hp + 1/4 Hp back up

Vortech mp40w x 3 + Jebao wp25

Eheim 1264 x 3 + water blaster 5000

Vortech back up battery

TLF-150 + Rowaphos

Activated carbon

Kamoer 3 channel + CaCl2 + NaHCo3

150L Refugium with DSB, miracle mud, cheato

2ft T5 x 2 light tubes for refugium

Link to comment
Share on other sites

  • SRC Member

I like your tonga scape :)

Cheers,

James

Will improve it by epoxying a few more branches!

Rescaped my top left a little. It is much more stable. Applied pressure on every corners and it remains still.

Tank is cloudy from bacteria boom , am spamming daily 2 vials of biodigest , 1 vial of bioptim , fm ultra bak , zv zeostart3.

post-22536-14088626061342_thumb.jpg

Once it is cycled and stabled, will collect back all my corals from 6 of my friends and chiong sps colonies to fill it up (:

Will also be changing my regular ball valve to either union with gate valve or union ball valve ( much better than regular ball valve in fine tuning flow).

Any suggestions which route should i go with ?

Sent from my GT-N7105 using Tapatalk

| Display : 48x30x22 Skimmer : SK-201 skimz

| Sump : 30x24x18 Wavemaker : 2x RW-15 , 1x RW-8

| Cooling : 1HP titanium drop in coil ATO : JBJ

| Lighting : ATI Sunpower 8x54w + 48x cree xte royal blue Return : Jebao dc-6000

| Dosing : Jebao dosing pump [ CaCl2 + NaHCO3 ] Pump :

| Reactor : FSZ Z160 zeolite reactor & phosban 150

| System : ZEOVIT

decomm-ed :

Ydkm SPS reef

:wub: >><< :wub:

Link to comment
Share on other sites

  • 2 weeks later...
  • SRC Member

Tank has been running for 12 days.
Rescaped a little again , this time have much lesser dead spot. But i think can put lesser sps liao ):
Nvm a extra rock placing at the base of right scape. still finding place for it.
post-22536-14096248854822_thumb.jpg
post-22536-14096252690193_thumb.jpg

Upgraded my skimmer sk201 to sm201 yesterday night (: ! Still in breaking in process.

post-22536-14096250146838_thumb.jpg

Hope my lighting come soon, then shall begin flooding tank with sps (:



Sent from my GT-N7105 using Tapatalk

post-22536-14096250628774_thumb.jpg

| Display : 48x30x22 Skimmer : SK-201 skimz

| Sump : 30x24x18 Wavemaker : 2x RW-15 , 1x RW-8

| Cooling : 1HP titanium drop in coil ATO : JBJ

| Lighting : ATI Sunpower 8x54w + 48x cree xte royal blue Return : Jebao dc-6000

| Dosing : Jebao dosing pump [ CaCl2 + NaHCO3 ] Pump :

| Reactor : FSZ Z160 zeolite reactor & phosban 150

| System : ZEOVIT

decomm-ed :

Ydkm SPS reef

:wub: >><< :wub:

Link to comment
Share on other sites

Bro, ur sump look shallow enough for the skimmer min water level clearance, why u still need to elevate it?

Display Tank : 36" x 20" x 20" Herbie overflow box design, Sump : 36" x 21" x 17", Frag Tank : 16” x 20” x 16”, custom built by Tank Culture.

Lightings : Ecotech  Radion XR15 Pro x 2 for Main Display Tank, Inled R80 x 1 for Frag Tank.

Chiller : Dalkin 1hp compressor with build-in drop coil.

Skimmer : Skimz Octa SC205i Protein Skimmer.

FR : H2Ocean FMR75 Fluidised Media Reactor with Hailea HX-2500 (Feeder Pump) running Rowaphos.

CR : Skimz Monzter E Series CM122 Calcium Reactor.

BPR: Marine Source Biopellet  Reactor with Continuum Reef Biopellet Fuel. 

Main Return Pump : SICCE Syncra ADV 9.0 & Jebao ACQ-10000 Water Pump.

Wavemaker : Jebao MOW-9 x2 for Main Display Tank & Jebao SLW-20M  Sine Wave Pump for  Frag Tank.

Water Top Up: AutoAqua Smart ATO Lite.

Link to comment
Share on other sites

  • SRC Member

Bro, ur sump look shallow enough for the skimmer min water level clearance, why u still need to elevate it?

I plan to increase my sump water level soon haaha

Recommended water height for this skimmer is 18~24cm.

swee scape la! tonga so nice!

THanks bro for the compliement (:

Sent from my GT-N7105 using Tapatalk

| Display : 48x30x22 Skimmer : SK-201 skimz

| Sump : 30x24x18 Wavemaker : 2x RW-15 , 1x RW-8

| Cooling : 1HP titanium drop in coil ATO : JBJ

| Lighting : ATI Sunpower 8x54w + 48x cree xte royal blue Return : Jebao dc-6000

| Dosing : Jebao dosing pump [ CaCl2 + NaHCO3 ] Pump :

| Reactor : FSZ Z160 zeolite reactor & phosban 150

| System : ZEOVIT

decomm-ed :

Ydkm SPS reef

:wub: >><< :wub:

Link to comment
Share on other sites

  • 3 weeks later...
  • SRC Member

Finally setted up my ati sunpower.

post-22536-14114600564485_thumb.jpg

post-22536-14114599733177_thumb.jpg

Now Im waiting for my 4x meanwell lpc-60-1050ma to arrive , then will start hooking up 2 strips of my 48x xte cree royalblue , they will be drived at 3w/led.

The light combi will be front to back:

Led , aquablue, blue+ , coral+, purple+, actinic , aquablue, blue+ , coral+ , Led.

Whats left is the compressor. Most probably will set it up completely by friday, then will start rushing to stock it up with colonies!

Sent from my GT-N7105 using Tapatalk

post-22536-14114600778129_thumb.jpg

  • Like 1

| Display : 48x30x22 Skimmer : SK-201 skimz

| Sump : 30x24x18 Wavemaker : 2x RW-15 , 1x RW-8

| Cooling : 1HP titanium drop in coil ATO : JBJ

| Lighting : ATI Sunpower 8x54w + 48x cree xte royal blue Return : Jebao dc-6000

| Dosing : Jebao dosing pump [ CaCl2 + NaHCO3 ] Pump :

| Reactor : FSZ Z160 zeolite reactor & phosban 150

| System : ZEOVIT

decomm-ed :

Ydkm SPS reef

:wub: >><< :wub:

Link to comment
Share on other sites

  • SRC Member

Hurry!

300Gallons of Pure Goodness! >Dimensions 6x2x2 (Foot)

1: Maxspect 160 Watt qty-2

2: Vortech MP 40 Wes

3:Jaebao WP40 qty-2

3: Skimz Becket Skimmer/ Ehiem 1260

4: Dymax XC 900 Calcium Reactor

5: American Pinpoint PH Controller

6: Iwaki MD 55 And MD 70 (Return)

7: Hydra Aquatics FR45 Reactor

8:Hailea 10HP Chiller

R2R forum->>>http://www.reef2reef.com/forums/photography-forum/154896-ashwins-reefing-photography.html

Link to comment
Share on other sites

  • SRC Member

Bro, fast hand fast leg.....your rainbow stylo losing colour liao....glad that you and tofu change to T5 dominant :)

Cheers,

James

Cheers,

James

Reviving my reef tank :

Crystal glass 53" x 22" x 17" rimless (inclusive of 12"x22"x17" IOS)

Life Reef HVS3-24 with mazzei venturi

ATI Sunpower 8 x 39w T5 (4 x Blue plus, 2 x Aqua blue special, Coral plus)

ZET Light 3 x 3w LEDs moonlight

Arctica 1/3 Hp + 1/4 Hp back up

Vortech mp40w x 3 + Jebao wp25

Eheim 1264 x 3 + water blaster 5000

Vortech back up battery

TLF-150 + Rowaphos

Activated carbon

Kamoer 3 channel + CaCl2 + NaHCo3

150L Refugium with DSB, miracle mud, cheato

2ft T5 x 2 light tubes for refugium

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share




  • Join us on the largest Reefing community in Asia!

    Sign up and share your reefing journey with us, make friends and get helps from the community .

     

  • Topics

  • Latest Update

    1. 0

      Carleton Diploma毕业证,卡尔顿大学毕业证——Q微信751558146¥加拿大,毕业证,学位证,文凭,学历认证,留学认证,教育部认证,Carleton University

    2. 0

      办理!!美国MU毕业证*成绩单@Q微信751558146马凯特大学(本科/硕士)毕业证成绩单*MU学位证书文凭各大学保录取Marquette University

    3. 0

      办理!!美国BU毕业证*成绩单@Q微信751558146贝勒大学(本科/硕士)毕业证成绩单*BU学位证书文凭各大学保录取Baylor University

    4. 0

      UWO Diploma毕业证,西安大略大学毕业证——Q微信751558146¥加拿大,毕业证,学位证,文凭,学历认证,留学认证,教育部认证,University of Western Ontario

×
×
  • Create New...