Maxspect razor help

[Ccccz]

Hi all, I need help on my maxspect razor 120w.

I'm using the auto settings. But after programming t1-t6. I'm always getting 9% more on the blues.

Meaning my t2 is set at 60% white 60% blue. But when I exit the program mode into auto mode, it shows me 54% white and 63% blue. Likewise at t6 which set to totally off for both A and B, it shows me 9% blue and yes, the lights are turn on at 9% blue.

I'm certain it's some settings I preconfigure somewhere in this set that causes this but I just can't figure it where I went wrong with the settings?

Cheers guys.

[nuj244]

If you want both chs to off at t6, you need to program 0% on both t1 and t6.

[Ccccz]

Thanks bro. I'll set that. I also realised that the percentages for a and b will fluctuate between the time points . Read that this is by design in order to simulate day and night and the percentage ramp up and down according to the values set in the time points. That means the value you see will not be the round number u preset originally..... Cool.

[Quas111]

It will be exactly 60 60 at the precise time t2, but before and after t2 the percentage will be transitional